summaryrefslogtreecommitdiff
path: root/boards.cfg
Commit message (Collapse)AuthorAgeLines
* ENGR00280957 mx6qsabreauto: add the SATA boot supportJason Liu2013-09-25-0/+1
| | | | | | This patch add the SATA boot support for the mx6qsabreauto board Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00276276 Add config file for uboot that used for mfgtool.Lu Lin2013-08-22-0/+1
| | | | | | this patch adds the config file to build uboot of mx6qsabresd for mfgtool. Signed-off-by: Lu Lin <b37454@freescale.com>
* ENGR00275348-5 imx6/sabreauto: add the plugin mode supportJason Liu2013-08-21-5/+5
| | | | | | | | This patch add the plugin mode support for sabreauto board. In order to enable the plugin mode, please turn on the CONFIG_USE_PLUGIN in the include/configs/mx6qsabre_common.h Signed-off-by: Jason Liu <r64343@freescale.com>
* mx6sl: Add initial support for mx6slevk boardFabio Estevam2013-08-07-0/+1
| | | | | | | | | | | | mx6slevk board is a development board from Freescale based on the mx6 solo-lite processor. For details about mx6slevk, please refer to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1 [Jason Liu]: Cherry-pick from upstream version, fix some conflicts. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00268557 imx6q:sabresd: add SATA supportJason Liu2013-06-26-0/+1
| | | | | | This patch adds the SATA support for i.mx6qsabresd board Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-14 i.mx6:sabreauto: Add the GPMI nand supportJason Liu2013-05-21-0/+3
| | | | | | Add the GPMI nand support Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-9 i.mx6q/dl/solo:sabreauto: Add the WEIM-NOR supportJason Liu2013-05-21-0/+3
| | | | | | Add the WEIM-NOR support Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-8 i.mx6q/dl/solo: sabresd/sabreauto: Add the SPI-NOR supportJason Liu2013-05-21-6/+9
| | | | | | | | | This patch adds the SPI-NOR support for the i.mx6q/dl/solo:sabresd/auto board: - Support the SPI-NOR function with sf command, - Support the enviroment from SPI-NOR when CONFIG_SYS_BOOT_SPINOR Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-7 i.mx6:sabreauto: Add the i.MX6solo sabreauto supportJason Liu2013-05-21-0/+1
| | | | | | | | | | | | This patch is to add the i.MX6solo sabreauto support, The i.MX6solo sabreauto board configuration has the following difference with i.MX6dl sabreauto: - DDR bus width: 32bit - DDR capacity: 1024M Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-6 i.mx6:sabreauto: Add the i.MX6DL sabreauto board supportJason Liu2013-05-21-0/+1
| | | | | | | | | | | | This patch is to add the i.MX6DL sabreauto board support. i.MX6DL sabreauto board share the same design with i.MX6Q sabreauto board except the SOC difference. The DDR script has been updated to the v0.2 version from ddr-scripts-rel.git, the commit based on is: bfd157a Updated MX6DL and MX6DQ ARD and SabreSD scripts Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-5 i.mx6q:sabreauto: rename the imximage.cfg to i.mx6q.cfgJason Liu2013-05-21-1/+1
| | | | | | | Rename the imximage.cfg to i.mx6q.cfg. No function change at all. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-4 i.mx6:sabresd: Add the i.MX6solo sabresd supportJason Liu2013-05-21-0/+1
| | | | | | | | | | | | This patch is to add the i.MX6solo sabre-sd support, The i.MX6solo sabre-sd board configuration has the following difference with i.MX6dl sabre-sd: - DDR bus width: 32bit - DDR capacity: 512M Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-3 i.mx6:sabresd: Add the initial i.MX6dl sabresd board supportJason Liu2013-05-21-0/+1
| | | | | | | | | | This patch is to add the initial Freescale i.MX6dl sabresd board support. - The DDR script has been updated to the v1.5 version from ddr-scripts-rel commit: bfd157a Updated MX6DL and MX6DQ ARD and SabreSD scripts. - i.mx6dl sabre-sd board shared the same design with i.mx6q sabre-sd board except the SOC is different.Thus, we can use the same board file. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00263305-1 i.mx:i.mx6q: make preparation for the i.mx6dl supportJason Liu2013-05-21-2/+2
| | | | | | | | | | | | | | This patch is to make preparation for the i.mx6dl support - Move CONFIG_MX6Q definition out of the mx6qsabre_common.h file - Include the mx6_pins.h instead of the mx6q_pins.h in board file, - Make the CPU configure by using the boards.cfg file - Make the DDR size configurable based on the boards.cfg. - Make the FDT file configurable based on the boards.cfg. There is no function change with this patch. Signed-off-by: Jason Liu <r64343@freescale.com>
* Tegra: T30: Beaver board support.Tom Warren2013-04-15-0/+1
| | | | | | | | Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* arm/km: add support for kmsuv31 boardHolger Brunck2013-04-12-0/+1
| | | | | | | | | | | | | This board is from a u-boot point of view a mixture between kmnusa and a standard km_kirkwood board. We have our u-boot environment in the spi NOR flash, but we have a direct connection between the kirkwood and the piggy. A FPGA is connected via the PCIe interface. So we only have to select the specific features in the board setup. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
* nand: mxc: Switch NAND SPL to generic SPLBenoît Thébaudeau2013-04-12-1/+1
| | | | | | | | | This also fixes support for mx31pdk and tx25, which had been broken by commit e05e5de7fae5bec79617e113916dac6631251156. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
* ARM: OMAP5: Rename omap5_evm to omap5_uevmSRICHARAN R2013-04-08-1/+1
| | | | | | | | | The omap5-uevm is the reference board name for OMAP5 soc based platform. So rename it accordingly. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Tested-by: Nishanth Menon <nm@ti.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-04-1/+4
|\
| * mx28evk: Introduce a new target for saving env vars to NANDFabio Estevam2013-04-03-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce 'mx28evk_nand' target for saving environment variables into NAND. The mx28evk board does not come with a NAND flash populated from the factory. It comes with an empty slot (U23), which allows the insertion of a 48-pin TSOP flash device. Tested with a K9LBG08U0D. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
| * Add initial support for Wandboard dual lite and solo.Fabio Estevam2013-03-20-0/+2
| | | | | | | | | | | | | | | | | | Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-26-0/+1
|\ \
| * | EXYNOS5: Snow: Add a configuration fileRajeshwari Shinde2013-03-12-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the configuration file for Snow Board and defines the same in boards.cfg. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | ti814x_evm: add ti814x evm board supportMatt Porter2013-03-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add TI814X EVM board directory, config file, and MAINTAINERS entry. Enable build. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt to recent omap_hsmmc requirements, Matt re-tested] Signed-off-by: Tom Rini <trini@ti.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-03-18-0/+12
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
| * | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-15-0/+6
| |\ \
| | * | nitrogen6x: Fix RAM size variableFabio Estevam2013-03-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following build error when buildig nitrogen6s1g: nitrogen6x.c:89:17: error: 'CONFIG_DDR_MB' undeclared (first use in this function) nitrogen6x.c:89:17: note: each undeclared identifier is reported only once for each function it appears in Reported-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | Add Boundary Devices Nitrogen6X boardsEric Nelson2013-03-13-0/+6
| | | | | | | | | | | | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * | | Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-12-0/+1
| |\ \ \
| | * | | ARM: atmel: add at91sam9g20ek_2mmc nand boot supportBo Shen2013-02-19-0/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add at91sam9g20_2mmc nand boot support. on this board, there is no dataflash, so disable it change one commet for at91sam9g20ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | Merge u-boot/master into u-boot-ti/masterTom Rini2013-03-11-3/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In master we had already taken a patch to fix the davinci GPIO code for CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these conflicts manually and comment the #else/#endif lines for clarity. Conflicts: arch/arm/include/asm/arch-davinci/gpio.h drivers/gpio/da8xx_gpio.c Signed-off-by: Tom Rini <trini@ti.com>
| * | | | arm: dra7xx: Add dra7xx_evm build supportLokesh Vutla2013-03-11-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding the build support for dra7xx_evm. Reusing omap5_evm.h config by moving it to omap5_common.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com>
| * | | | am335x_evm: Add am335x_evm_usbspl build targetTom Rini2013-03-08-0/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | We add USB (RNDIS gadget) SPL support as a separate target. We need to pull out YMODEM support in order to be a small enough target binary. Signed-off-by: Tom Rini <trini@ti.com>
| * | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-02-21-0/+2
| |\ \ \
| | * | | am335x evm: Add am335x_evm_spiboot targetTom Rini2013-02-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This target will move the environment into SPI flash and documents the expected layout. We correct the SPL define for where U-Boot is and remove an unused define. Signed-off-by: Tom Rini <trini@ti.com>
| | * | | OMAP3: igep00x0: Add new IGEP COM PROTON.Enric Balletbo i Serra2013-02-18-0/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | The IGEP COM PROTON is a new ultra compact module design with an on-board ethernet controller. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
| * | | Merge 'u-boot-microblaze/mainline/arm' into 'u-boot-arm/master'Albert ARIBAUD2013-02-21-0/+1
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | This pulls the three following ZYNQ commits into ARM master: 7dca54f8: xilinx: zynq: Enable DCC and create new zynq_dcc board 59c651f4: arm: zynq: Add SLCR support with system reset 00ed3458: arm: zynq: Add lowlevel initialization to C
| | * | xilinx: zynq: Enable DCC and create new zynq_dcc boardMichal Simek2013-02-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Enable DCC driver for arm zynq platform to be compiled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | ppc: Remove PCIPPC2 and PCIPPC6 boardsStefan Roese2013-03-11-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards seem to be unmaintained for quite some time. So lets remove support for them completely. This also cleans up some common drivers/files. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch> Acked-by: Wolfgang Denk <wd@denx.de>
* | | | mpc512x: add ifm ac14xx boardAnatolij Gustschin2013-03-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new mpc5121e based ac14xx board and a new pinmux config function for setting individual pinmux bit groups. This function is used in ac14xx board code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | | mpc5200: Add a4m2k board portStefan Roese2013-03-09-0/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the a4m2k MPC5200B board port. Its a derivate of the a3m071 board with only minor changes. Additionally this patch includes some clean-up changes: - Remove I2C support from a3m071 as its unused - Fix/enhance default env variables - Fix some comments - Add newly introduced CONFIG_SPL_TARGET to automatically build "u-boot-img.bin" - Fix dtb patching in READ desciption for SPL Linux booting: "fdt chosen" needs to get called to patch/create the chosen node. - Add missing call to spl_board_init(): Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get called in the SPL version. Signed-off-by: Stefan Roese <sr@denx.de>
* | | blackfin: bf60x: add board and headers files to support bf609Sonic Zhang2013-03-04-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Board and config header files for bf609-ezkit support. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* | | powerpc/83xx/km: add support for kmopti2 boardHolger Brunck2013-02-15-0/+1
| | | | | | | | | | | | | | | | | | | | | This board is similar to TUXX1 but it has a different sized second FPGA. Therefore the configuration for the third chipselect is different. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* | | powerpc/83xx/km: cleanup tuxx1 supportHolger Brunck2013-02-15-3/+3
|/ / | | | | | | | | | | | | | | | | This is a preparation for the upcoming kmopti2 board. This board has also a second fpga on board which is different to the tuxx1 target. But we want to use the same header file. So remove the config option KM_DISABLE_APP2 and simply use the board names to distinguish the features. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* | x86: Remove eNET boardsSimon Glass2013-02-14-2/+0
| | | | | | | | | | | | | | These are no longer used and should be removed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-02-12-4/+9
|\ \ | |/ |/|
| * Tegra114: Add/enable Dalmore build (T114 reference board)Tom Warren2013-02-11-0/+1
| | | | | | | | | | | | | | This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * pcm051: Add support for Phytec phyCORE-AM335xLars Poeschel2013-02-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board is named pcm051 and has this hardware: SOC: TI AM3359 DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB ETH 1: LAN8710AI SPI-Flash: W25Q64BVSSIG RTC: RV-4162-C7 I2C-EEPROM: CAT32WC32 NAND: MT29F4G08_VFPGA63 PMIC: TPS65910A3 LCD Supported: UART 1 MMC/SD ETH 1 USB I2C SPI Not yet supported: NAND RTC LCD Signed-off-by: Lars Poeschel <poeschel@lemonage.de> [trini: Add #define CONFIG_PHY_ADDR 0 to config] Signed-off-by: Tom Rini <trini@ti.com>
| * OMAP3: use a single board file for IGEP devicesJavier Martinez Canillas2013-02-07-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even when the IGEPv2 board and the IGEP Computer-on-Module are different from a form factor point of view, they are very similar in the fact that share many components and how they are wired. So, it is possible (and better) to have a single board file for both devices and just use the CONFIG_MACH_TYPE to make a differentiation between each board when needed. This change avoids code duplication by removing 298 lines of code and makes future maintenance easier. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-02-02-0/+2
| |\
generated by cgit v1.1 at 2024-11-24 19:10:26 +0000