summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
...
* arm/mgcoge3un: check dip_switch at startupHolger Brunck2015-11-18-4/+7
| | | | | | | | | | | | Similar to kmcoge5un we need to check the dip switch at startup connected to the kirkwood at MPP43. If it's set we need to set the actual_bank to zero to boot from SW bank zero. Additional to kmcoge5un we need to check also the pin in misc_init to decide wether we wait for the ne to start or not. If the dip_switch is set we don't wait and continue immediately. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* arm/km: Fix LED configuration for 88E1118R PHY (PIGGY3)Tobias Müller2015-11-18-0/+55
| | | | | | | | | | Configure PHY LED register for Marvell 88E1118R PHY used on PIGGY3 to match with printed descriptions on PCB Signed-off-by: Tobias Müller <Tobias.Mueller@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [trini: Fix typo, CRTL_PAGE -> CTRL_PAGE] Signed-off-by: Tom Rini <trini@konsulko.com>
* board/ti/am335x: add support for BeagleBone Greenrobertcnelson@gmail.com2015-11-18-3/+9
| | | | | | | | | | | | | | | | | | | | | SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus the HDMI port and addition of two Grove connectors (i2c2 and usart2). This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] http://beagleboard.org/green http://www.seeedstudio.com/wiki/Beaglebone_green In Mainline Kernel as of: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=79a4e64c679d8a0b1037da174e4aea578c80c4e6 Patch tested on BeagleBone Black (rev C) and BeagleBone Green (production model) Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@konsulko.com> CC: Jason Kridner <jkridner@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap3: cm-t3517: add board specific get_board_rev()Dmitry Lifshitz2015-11-18-0/+9
| | | | | | | | CM-T3517 has several HW revisions. Add board specific get_board_rev() callback to retrieve revision number. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Igor Grinberg <grinberg@compulab.co.il>
* arm: mx6: cm-fx6: define fallback boot devices for splNikita Kiryanov2015-11-18-9/+10
| | | | | | | | | | | | Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* board: ti: beagle_x15: Rename to indicate support for TI am57xx evmsKipisz, Steven2015-11-18-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge git://git.denx.de/u-boot-marvellTom Rini2015-11-17-0/+17
|\
| * arm: mvebu: a38x: serdes specification cleanupKevin Smith2015-11-17-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Instead of allocating space in the driver for the serdes specification table, just allow the board file to set a pointer to it. Also, allow the board to only specify the lanes that are used instead of including unused lanes. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: a38x: Remove unsupported topologiesKevin Smith2015-11-17-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot of extra configuration information was left over in the Marvell serdes and DDR3 initialization code for boards that U-boot does not support. Remove this extra config information, and the concept of fixing up board topologies with information loaded from an EEPROM. If this needs to be done, it should be handled in the board file, not in core code. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | board: axs10x switch serial port and Ethernet to driver modelAlexey Brodkin2015-11-18-12/+0
|/ | | | | | | | | | | | | | | | With this change Synopsys DesignWare SDP board is switched to driver model for both serial port (serial_dw) and Ethernet (Designware GMAC). This simplifies include/configs/axs101.h and allows for reuse of Linux's Device Tree description. For simplicity Linux's .dts files are not blindly copied but only very few extracts of them are really used (those that are supported in U-Boot at the moment). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-11-16-35/+234
|\
| * arm: mx6: cm-fx6: add splash locations to cm-fx6Nikita Kiryanov2015-11-16-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Add the following splash locations to cm-fx6: * filesystem formatted mmc * filesystem formatted usb * filesystem formatted sata Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * splash_source: add support for filesystem formatted mmcNikita Kiryanov2015-11-16-0/+2
| | | | | | | | | | | | | | | | | | Add support for loading splash image from an SD card formatted with a filesystem. Update boards to maintain original behavior where needed. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * imx: mx7dsabresd: support lcdifPeng Fan2015-11-12-0/+64
| | | | | | | | | | | | | | | | | | | | | | Support LCDIF for mx7dsabresd board: 1. Add pinmux settings 2. Add VIDEO related macro definition and videomode env settings. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com>
| * imx: mx6ul_14x14_evk: support lcdif displayPeng Fan2015-11-12-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | Support lcdif display: 1. Add pinmux and pad settings for LCDIF 2. Introduce setup_lcd to do the settings for LCDIF 3. Enable VIDEO related macros in board header files 4. Add a new env videomode which is needed by mxsfb.c. The settings for videomode in this patch is for TFT43AB. 5. Tested on mx6ul 14x14/9x9 evk. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * xfi3: correct function namePeng Fan2015-11-12-1/+1
| | | | | | | | | | | | | | | | board_mxsfb_system_setup must be renamed mxsfb_system_setup. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * gw_ventana: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
| * ot1200: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * novena: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * mx6ul_14x14_evk: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sxsabresd: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6slevk: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabresd: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | | | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * Merge git://git.denx.de/u-bootStefano Babic2015-11-12-350/+2812
| |\
| * | mx7dsabresd: add secure boot supportAdrian Alonso2015-10-30-0/+7
| | | | | | | | | | | | | | | | | | Add secure boot support for mx7dsabresd target board Signed-off-by: Adrian Alonso <aalonso@freescale.com>
| * | imx: mx6sabresd: add i.MX6DQP Sabresd supportPeng Fan2015-10-30-6/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6DQP-Sabresd board support: 1. set fdt_file according to board_rev which is set at runtime. 2. Add mx6dqp_ddr_ioregs and calibration value for this board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | arm, imx6, aristainetos2: set gpr register after resetHeiko Schocher2015-10-30-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | setting the gpr 1,8 and 12 registers to a fix value. This is needed because after a WDT reset, this registers are not correct resettet, and prevent linux from booting again. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | x86: qemu: Convert to use driver model ethBin Meng2015-11-13-14/+1
| | | | | | | | | | | | | | | | | | | | | Move to driver model for ETH (e1000) on QEMU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-11-12-23/+30
|\ \ \
| * | | ARM: tegra: simplify GPU setupAlexandre Courbot2015-11-12-23/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the GPU node in the system-wide ft_system_setup() hook instead of the board-specific ft_board_hook(). This allows us to enable GPU per SoC generation instead of per-board as we did initially. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: enable PCI support of p2371-2180Stephen Warren2015-11-12-0/+30
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | p2371-2180 has two PCI ports; a regular x4 slot and a x1 M.2 slot. This patch adds the relevant DT to enable the PCI controller and configure the XUSB padctl pin muxing, and code to turn on the PCI power and enable PCI features in U-Boot. I have only tested the x4 slot. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | pengwyn: nand and ethernet fixesVincent BENOIT2015-11-12-6/+0
| | | | | | | | | | | | | | | | | | -> Add National instrument ethernet transceiver configuration used (DP83848) -> Change cpsw slave phy address -> modify nand configuration to use the correct ECC and correct nand features
* | | board: gdsys: Enable osd on output onlyDirk Eibach2015-11-12-2/+4
| | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | board: gdsys: Add osdsize commandDirk Eibach2015-11-12-0/+38
| | | | | | | | | | | | | | | | | | osdsize adjusts the gdsys IHS osd dimensions in characters. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | hrcon: Add fan controllersDirk Eibach2015-11-12-24/+59
| | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | hrcon: Add support for the DH variantDirk Eibach2015-11-12-28/+115
| | | | | | | | | | | | | | | | | | hrcon DH(dual head) has two video outputs per FPGA. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | hrcon: Fix videoboard i2c setupDirk Eibach2015-11-12-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | - i2c addresses for the videoboard port expanders were wrong. - the fpga reset signal was not initialized. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | hrcon: Use generic ioep-fpga supportDirk Eibach2015-11-12-239/+9
| | | | | | | | | | | | | | | | | | | | | The strider platform moved some generic code into ioep-fpga.c. Make use of that on hrcon platform. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | mpc83xx: Add strider boardDirk Eibach2015-11-12-41/+1033
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | iocon: reset FPGAs in last_stage_init()Reinhard Pfau2015-11-12-1/+7
| | | | | | | | | | | | | | | | | | | | | - Reset FPGAs in last_stage_init() Signed-off-by: Reinhard Pfau <pfau@gdsys.de> Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | controlcenterd: Disable sideband clocksDirk Eibach2015-11-12-0/+5
| | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | dlvision-10g: Support displayportDirk Eibach2015-11-12-31/+38
| | | | | | | | | | | | | | | | | | Support dlvision-10g hardware with displayport output. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | board: gdsys: Consider DP501 limits on link trainingDirk Eibach2015-11-12-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | DP501 only supports DP 1.1a. Limit settings for link bandwidth and lane count to values allowed by DP 1.1a. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* | | board: gdsys: Increase DP501 I2C retry intervalDirk Eibach2015-11-12-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | With Club 3D dual link adapter there are AUX-channel timeouts when EDID is read. Increasing retry interval time to max (400us) fixes this. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
* | | board: gdsys: Configure DP501 SPDIF inputDirk Eibach2015-11-12-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
* | | board/ti/am335x: beaglebone stop muxing i2c1_pin_muxrobertcnelson@gmail.com2015-11-12-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the BeagleBone these i2c1 pins are routed to the expanasion header, where they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1 Fixes: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/313894/1387696 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> CC: Tom Rini <trini@konsulko.com>
* | | board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...)Hannes Petermaier2015-11-12-18/+9
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we don't have for sure a valid IP-setup during board_late_init(...) because it maybe allready stored in environment or not, we cannot form a proper vxWorks bootline at this place. So we move to the way, forming the bootline just before executing/launching vxWorks. To do this we use the bootvx command instead go. We only have to form the "othbootargs" environment variable, the rest is done pretty good by the "bootvx" commannd. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | nios2: add 3c120 and 10m50 devboards MAINTAINERSThomas Chou2015-11-12-0/+13
| | | | | | | | | | | | | | Add 3c120 and 10m50 devboards MAINTAINERS Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-11-10-0/+382
|\ \
| * | ls1043ardb: Add missing config entries to MAINTAINERSFabio Estevam2015-11-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | ls1043ardb_nand_defconfig and ls1043ardb_sdcard_defconfig are missing in the MAINTAINERS file, so add them for completeness. Reported-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Albert ARIBAUD <albert.u.boot@aribaud.net>