summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* sunxi: common VBUS detection logic in usbcPaul Kocialkowski2015-04-15-1/+0
| | | | | | | | | | | | | VBUS detection could be needed not only by the musb code (to prevent host mode), but also by e.g. gadget drivers to start only when a cable is connected. In addition, this allows more flexibility in vbus detection, as it could easily be extended to other USBC indexes. Eventually, this would help making musb support independent from a hardcoded USB controller index (0). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun6i: Add support for the Mixtile LOFT-Q boardHan Pengfei2015-04-15-0/+5
| | | | | | | | | | | | | The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, NXP JN5168 zigbee gw, remote support. Also see http://focalcrest.com/en/pc.html#pro02 Signed-off-by: Han Pengfei <pengphei@sina.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-13-1/+530
|\
| * ARM: mx5: add support for USB armory boardAndrej Rosano2015-04-09-0/+530
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on Freescale i.MX53 SoC. http://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Chris Kuethe <chris.kuethe@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Vagrant Cascadian <vagrant@debian.org> Tested-By: Vagrant Cascadian <vagrant@debian.org> Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
| * mx53loco: Disable printing cpuinfoFabio Estevam2015-04-08-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the following boot messages on a mx53qsb: U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 1000 MHz Reset cause: unknown reset Net: FEC [PRIME] The CPU and Reset cause lines appear twice. Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via I2C to raise the CPU voltage so that it can run at 1GHz. To avoid such misleading double printings, disable printing cpu info for now. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com>
* | ARM: rpi: add a couple more revision IDsStephen Warren2015-04-13-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | According to Gordon Henderson's WiringPi library, there are some more Pi revision IDs out there. Add support for them. http://git.drogon.net/?p=wiringPi;a=blob_plain;f=wiringPi/wiringPi.c;hb=5edd177112c99416f68ba3e8c6c4db6ed942e796 At least ID 0x13 is out in the wild: Reported-by: Chee-Yang Chau <cychau@gmail.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | Merge git://git.denx.de/u-boot-arcTom Rini2015-04-10-0/+37
|\ \
| * | board: axs10x - support v3 mother-boardAlexey Brodkin2015-04-09-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There're 2 versions of motherboards that could be used in ARC SDP. The only important difference for U-Boot is different NAND IC in use: [1] v2 board (we used to support up until now) sports MT29F4G08ABADAWP while [2] v3 board sports MT29F4G16ABADAWP They are almost the same except data bus width 8-bit in [1] and 16-bit in [2]. And for proper support of 16-bit data bus we have to pass NAND_BUSWIDTH_16 option to NAND driver core - which we do now knowing board type we're running on. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-04-10-0/+647
|\ \ \
| * | | lpc32xx: add support for board work_92105Albert ARIBAUD \(3ADEV\)2015-04-10-0/+647
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | odroid-XU3: update board maintainerPrzemyslaw Marczak2015-04-09-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | At present Hyungwon can't take care of this board in U-Boot, so I will keep it working. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Hyungwon Hwang <human.hwang@samsung.com>
* | | mcx: update maintainer and convert to generic boardAnatolij Gustschin2015-04-09-1/+1
|/ / | | | | | | | | | | | | | | Remove obsolete email address from MAINTAINERS. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com>
* | ARM: zynq: Remove Jagan from list of maintainersMichal Simek2015-04-08-1/+0
| | | | | | | | | | | | Email address is not longer valid that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | smdk5420: Remove GPIO enumsAjay Kumar2015-04-06-15/+0
| | | | | | | | | | | | | | | | | | | | Remove GPIOs from smdk5420 board file and because the same is already specified via DT. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge git://git.denx.de/u-boot-arcTom Rini2015-04-03-2/+2
|\ \
| * | board: AXS10x - update SDIO clock valueAlexey Brodkin2015-04-03-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | With the most recent board firmware correct SDIO clock is 50MHz as opposed to 25 MHz before. Also set max frequency of MMC data exchange equal to SDIO clock - because there's no way to transfer data faster than interface clock. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-04-03-70/+71
|\ \ \ | |/ / |/| | | | | | | | | | | | | | Conflicts: board/armltd/vexpress64/vexpress64.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * | ARM: tegra: colibri_t20: fix nand pinmuxMarcel Ziswiler2015-03-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Pingroup ATC seems to come out of reset with config set to NAND, so we need to explicitly configure some other function to this group in order to avoid clashing settings. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: tegra: fix colibri_t20 asix resetMarcel Ziswiler2015-03-30-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | Fix ASIX USB to Ethernet chip reset. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: tegra: rename colibri_t20 board/configuration/device-treeMarcel Ziswiler2015-03-30-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: tegra: get rid of colibri_t20-commonMarcel Ziswiler2015-03-30-57/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a preparatory step to renaming the board folder as well first get rid of the colibri_t20-common after having integrated it into colibri_t20_iris for now. While at it also migrate to using NVIDIA's common.mk magic. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: seaboard: Correct the gpio_request() callSimon Glass2015-03-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Requesting a GPIO without a name is not supposed anymore. This causes the request to fail. Add a name so that the serial console works on seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARMv8: enable DM in vexpress64 boardDavid Feng2015-03-27-0/+13
| | | | | | | | | | | | Signed-off-by: David Feng <fenghua@phytium.com.cn>
* | | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-03-31-0/+231
|\ \ \
| * | | ARM: atmel: at91sam9n12ek: enable spl supportBo Shen2015-04-01-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL support for at91sam9n12ek boards, now it supports boot up from NAND flash, serial flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: atmel: at91sam9x5ek: enable spl supportBo Shen2015-04-01-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL support for at91sam9x5ek board. Now, it supports boot up from NAND flash and SPI flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: atmel: at91sam9m10g45ek: enable spl supportBo Shen2015-04-01-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supports boot up from NAND flash with software ECC eanbled. And supports boot up from SD/MMC card with FAT file system. As the boot from SD/MMC card with FAT file system, the BSS segment is too big to fit into SRAM, so, use the lds to put it into SDRAM. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: at91: sama5d4: display the U-Boot version on LCDWu, Josh2015-04-01-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will display the U-Boot version on LCD. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com>
* | | | Merge git://git.denx.de/u-boot-nand-flashTom Rini2015-03-31-41/+0
|\ \ \ \
| * | | | nand: Remove CONFIG_MTD_NAND_VERIFY_WRITEPeter Tyser2015-03-30-41/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some time and a more generic method of NAND verification now exists in U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2015-03-31-0/+560
|\ \ \ \ | |/ / / |/| | / | | |/ | |/|
| * | board/seco: Add mx6q-uq7 basic board supportBoris BREZILLON2015-03-23-0/+560
| | | | | | | | | | | | | | | | | | | | | | | | Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported). It also adds a Kconfig skeleton to later add more SECO board (supporting SoC and board variants). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* | | sunxi: UTOO_P66: Add missing MAINTAINERS entryHans de Goede2015-03-29-0/+1
| | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clockIain Paton2015-03-29-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | make the CPU clock selectable via Kconfig this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each soc header and replaces it's use in board/sunxi/board.c with CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board specific frequency on boot Signed-off-by: Iain Paton <ipaton0@gmail.com> [hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the arch-timer clk speed on sun7i to fix mis-compile on sun7i] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | powerpc: ppc4xx: convert AMCC boards to generic boardAnatolij Gustschin2015-03-28-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD to amcc-common.h and CONFIG_DISPLAY_BOARDINFO to Kconfig files. canyonlands.h includes amcc-common.h, so remove CONFIG_SYS_GENERIC_BOARD definition there. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Feng Kan <fkan@amcc.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tom Rini <trini@konsulko.com>
* | | m68k: fix 3 broken boardsangelo@sysam.it2015-03-28-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error. These boards have video but don't need any ppc related video_setmem(). Fix M53017EVB moving away embedded env to a different offset, as in M52277EVB. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* | | vexpress64: cut config and defaults for unclear variantLinus Walleij2015-03-28-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This variant that is neither FVP / Base Model or Juno Versatile Express 64bit is confusing. Get rid of it unless someone can point out what machine that really is. Seems to be an evolutional artifact in the config base. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | vexpress64: remove board late init, use smhloadLinus Walleij2015-03-28-96/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the kludgy late board init from the FVP simulator version of Versatile Express 64bit (ARMv8), and replace it with a default boot command using the new smhload command to load the files using semihosting. Tested on the Foundation Model. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | board/BuR/common: remove unused function 'blink'Hannes Petermaier2015-03-28-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | since we have possibility to write out on lcd whats going on, we don't need the gpio blink functionality anymore. Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* | | board/BuR/common: move I2C initialization from common part to board-specificHannes Petermaier2015-03-28-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At this time I2C and responsible pin-mux is setup during PMIC initialziation within common.c, this is possible because today PMIC is always connected on I2C0. In Future this will be changed, PMIC isn't anymore connected to bus0 in call cases. So we do following: - rename enable_i2c_pin_mux0 to enable_i2c_pin_mux to be generic for enabling pin-mux on different or more busses. - move the call to i2c_pin_mux and i2c_init from common.c to the specific board.c Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* | | ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283xMasahiro Yamada2015-03-28-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2) are similar enough. One of the biggest differences is the ARM processor. It is reasonable to collect the source files into a single place, arch/arm/mach-bcm283x/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* | | malloc_f: enable SYS_MALLOC_F by default if DM is onMasahiro Yamada2015-03-28-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* | | malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LENMasahiro Yamada2015-03-28-7/+0
| |/ |/| | | | | | | | | | | | | | | | | The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig as 0x400. Each defconfig or Kconfig need not repeat the same value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* | bav335x: Update defconfigs and fix typo in EEPROM config formatGilles Gameiro2015-03-24-1/+1
| | | | | | | | | | | | | | | | | | After v2015.01 we need to have DM enabled in order to use UART. Also fix a typo in the EEPROM config format. Signed-off-by: Gilles Gameiro <gilles@gigadevices.com> [trini: Reword commit message, re-save defconfigs with 'savedefconfig'] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: rpi: fix RPi1 board rev detection for warranty bitStephen Warren2015-03-24-0/+7
| | | | | | | | | | | | | | | | | | Apparently the firmware's board rev response includes both the board revision and some other data even on the RPi1. In particular, the "warranty bit" is bit 24. We need to mask that out when looking up the board ID. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | remove unnecessary version.h includesRob Herring2015-03-24-31/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-03-20-0/+13
|\
| * ARM: atmel: sama5d4 xplained: enable mmc powerBo Shen2015-03-18-0/+3
| | | | | | | | | | | | Enable the power for MMC/SD port. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * ARM: at91: at91sam9rlek: add mci supportWu, Josh2015-03-18-0/+10
| | | | | | | | | | | | | | | | This patch enable the MCI support for at91sam9rlek board. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase on ToT] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-03-18-0/+56
|\ \ | |/ |/|
generated by cgit v1.1 at 2024-11-05 09:17:44 +0000