summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
...
* | | armv8/ls2085qds: Update SFP TX bit as "0" to enable XFIPrabhakar Kushwaha2015-07-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | FPGA BRDCFG9[SFP_TX] should be clear in order to enable XFI ports. Signed-off-by: Dai Haruki <Dai.Haruki at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | armv8/ls2085aqds: Add support of SerDes protocol 0x49Prabhakar Kushwaha2015-07-20-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SerDes Protocol 0x49 enables 4 SGMII, PEX4, SATA1 and SATA2. Add support of 0x49 SerDes protocol to enable 4SGMII on slot4 of ls2085aqds platform. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | armv8/ls2085ardb: add hwconfig setting for eSDHCYangbo Lu2015-07-20-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add hwconfig setting for eSDHC since it shares some pins with other IP block. Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | armv8/ls2085ardb: Add eth & phy firmware loading supportPrabhakar Kushwaha2015-07-20-14/+134
| |/ |/| | | | | | | | | | | | | | | | | Add support for board eth initialization and support for loading phy firmware. PHY firmware needs to be loaded from board_eth_init() because all the MACs are not initialized by ldpaa_eth driver. Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge git://git.denx.de/u-boot-x86Tom Rini2015-07-15-2/+0
|\ \
| * | x86: Remove MARK_GRAPHICS_MEM_WRCOMBBin Meng2015-07-14-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | MARK_GRAPHICS_MEM_WRCOMB is not referenced anywhere in the code, hence remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-07-14-0/+8
|\ \ \ | |/ / |/| |
| * | stv0991: configure clock & pad muxing for qspiVikas Manocha2015-07-03-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | stv0991 has cadence qspi controller for flash interfacing, this patch configures the device pads & clock for the controller. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
* | | Merge git://git.denx.de/u-boot-samsungTom Rini2015-07-10-0/+1
|\ \ \
| * | | arm: adds the status info for odroid-xu3Minkyu Kang2015-07-10-0/+1
| | |/ | |/| | | | | | | | | | | | | Adds the 'F:' entry for the board's defconfig Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge git://git.denx.de/u-boot-marvellTom Rini2015-07-10-0/+6
|\ \ \
| * | | arm: mvebu: db-88f6820-gp: Add MAINTAINERS fileStefan Roese2015-07-10-0/+6
| |/ / | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* | | stm32f4: fix MAINTAINERS fileAntonio Borneo2015-07-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When "scripts/get_maintainer.pl" parses "board/.../MAINTAINERS", it uses the line containing board name as delimiter. Without this line, the script happily mixes the lines from current board MAINTAINERS file with lines from another file. Fix it by adding a reasonable board name. Tested by comparing output of: cat board/st/stm32f429-discovery/MAINTAINERS ./scripts/get_maintainer.pl -f board/st/stm32f429-discovery Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: u-boot@lists.denx.de To: Kamil Lulko <rev13@wp.pl> Cc: Tom Rini <trini@konsulko.com>
* | | arm: baltos: drop I2C speed to 1000 HzYegor Yefremov2015-07-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | This action is need to make I2C communication with PMIC stable for low temperature. Print current I2C speed in SPL for visual control. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | | ARM: beagle_x15: prevent DCAN1 _wait_target_disable failure in kernelRoger Quadros2015-07-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If board is booted with transitions happening on DCAN1 pins then the following warning is seen in the kernel at boot when the hwmod layer initializes. "omap_hwmod: dcan1: _wait_target_disable failed" This is because DCAN1 module's SWAKEUP mechanism is broken and it fails to correctly turn OFF if it sees a transition on the DCAN1 pins. Suggested workaround is to keep DCAN1 pins in safe mode while enabling/disabling DCAN1 module. The hwmod layer enables and disables all modules at boot and we have no opportunity to put the DCAN1 pins in safe mode at that point. DCAN1 is not used by u-boot so it doesn't matter to it if these pins are in safe mode. The kernel driver correctly configures the right mode when DCAN1 is active. Signed-off-by: Roger Quadros <rogerq@ti.com> [trini: s/PULLUP/PULL_UP/ based on DRA7xx EVM version of this patch] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | ARM: DRA7-evm: prevent DCAN1 _wait_target_disable failure in kernelRoger Quadros2015-07-08-2/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If board is booted with transitions happening on DCAN1 pins then the following warning is seen in the kernel at boot when the hwmod layer initializes. "omap_hwmod: dcan1: _wait_target_disable failed" This is because DCAN1 module's SWAKEUP mechanism is broken and it fails to correctly turn OFF if it sees a transition on the DCAN1 pins. Suggested workaround is to keep DCAN1 pins in safe mode while enabling/disabling DCAN1 module. The hwmod layer enables and disables all modules at boot and we have no opportunity to put the DCAN1 pins in safe mode at that point. DCAN1 is not used by u-boot so it doesn't matter to it if these pins are in safe mode. The kernel driver correctly configures the right mode when DCAN1 is active. Signed-off-by: Roger Quadros <rogerq@ti.com>
* | ARM: DRA72x: fix io delay calibration for ethernetMugunthan V N2015-07-07-24/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | we currently use in-development IODelay values for DRA72x which are proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet Phy over RGMII. The PHY characteristics and routing choices made on the EVM, make the current iodelay values fail ethernet communication. Instead, we need to choose custom values for DRA72x-evm specifically designed for the PHY and routing on the platform for ethernet to function. Cc: Nishanth Menon <nm@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-07-07-0/+14
|\ \
| * | board: baltos - add maintainer informationYegor Yefremov2015-07-07-0/+6
| | | | | | | | | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
| * | board: am43xx: Add maintainer informationLokesh Vutla2015-07-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | am43xx_evm_ethboot/usbhost_boot_defconfig entries are missing in MAINTAINER file. Adding entries for them. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | cairo: add missing MAINTAINERS fileAlbert ARIBAUD \(3ADEV\)2015-07-07-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the following two warnings from buildman: WARNING: no status info for 'cairo' WARNING: no maintainers for 'cairo' Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-07-05-0/+6
|\ \ \
| * | | sunxi: Add Sinlinx SinA33 defconfigChen-Yu Tsai2015-07-05-0/+6
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO and GPIO headers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-07-03-2/+60
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: configs/tbs2910_defconfig configs/tqma6q_mba6_mmc_defconfig configs/tqma6q_mba6_spi_defconfig configs/tqma6s_mba6_mmc_defconfig configs/tqma6s_mba6_spi_defconfig include/configs/mx6_common.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * | arm: imx6: tqma6: implement KConfig baseboard selectionMarkus Niebel2015-06-27-0/+14
| | | | | | | | | | | | | | | | | | | | | this finally removes the need for extra settings in defconfig Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | arm: imx6: tqma6: boot device selection via KconfigMarkus Niebel2015-06-27-0/+19
| | | | | | | | | | | | Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | arm: imx6: tqma6: implement IMX_CONFIG with KconfigMarkus Niebel2015-06-27-0/+4
| | | | | | | | | | | | | | | | | | | | | Now that we have the Kconfig based CPU type selection, use this to fill the IMX_CONFIG automatically Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | arm: mx6: tqma6: CPU type selection via KconfigMarkus Niebel2015-06-27-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the first patch to remove the CONFIG_SYS_EXTRA_OPTIONS. This patch implements CPU type selection from Kconfig. Further Kconfig stuff is added later. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | mx6cuboxi: Fix boot of hummingboard dual-liteFabio Estevam2015-06-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hummingboard dual-lite is picking the incorrect calibration structure. Fix it so that it can boot. While at it, also fix p1_mpdgctrl1 register to match Solid-run's setting. Reported-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Andrei Gherzan <andrei@gherzan.ro>
* | | board: axs103 - add maintainer informationAlexey Brodkin2015-07-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Looks like I forgot to add myself as a maintainer for AXS103 defconfig. Fixing this now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@konsulko.com>
* | | arc: implement slave cores kick-start for Linux kernelAlexey Brodkin2015-07-01-0/+30
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With new SMP-enabled CPUs with ARC HS38 cores and corresponding support in Linux kernel it's required to add basic SMP support in U-Boot. Currently we assume the one and only core starts execution after power-on. So most of things in U-Boot is handled in UP mode. But when U-Boot is used for loading and starting Linux kernel right before jumping to kernel's entry point U-Boot: [1] Sets all slave cores to jump to the same address [kernel's entry point] [2] Really starts all slav cores In ARC's implemetation of SMP in Linux kernel all cores are supposed to run the same start-up code. But only core with ID 0 (master core) processes further while others are looping waiting for master core to complete some initialization. That means it's safe to un-pause slave cores and let them execute kernel - they will wait for master anyway. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com>
* | Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal ↵Ian Campbell2015-06-28-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND memory" This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a. This patch did not have a full and proper copyright/S-o-b chain. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Conflicts: include/configs/sun6i.h include/configs/sun8i.h
* | Move default y configs out of arch/board KconfigJoe Hershberger2015-06-25-29/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* | siemens,am33x,thuban: rename dxr2 to thubanHeiko Schocher2015-06-19-4/+4
| | | | | | | | | | | | | | | | Update new naming scheme. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | siemens,am33x,rastaban: add rastaban configHeiko Schocher2015-06-19-0/+18
| | | | | | | | | | | | | | | | | | | | rastaban is a draco version with more flash, more RAM and faster CPU. Number of partitions is the same but rootfs partition is different. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: BeagleBoard-X15: Enable VTT regulatorLokesh Vutla2015-06-19-0/+23
| | | | | | | | | | | | | | | | BeagleBoard-X15 uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. Configuring gpio7_11. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm, am33xx: update for siemens am335x based boardsHeiko Schocher2015-06-19-68/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | updates for the siemens am335x based boards: - draco: add delay for DDR3 configuration - change MTD partition layout and add a possibility to redefine MTD layout in board header. - move ubi support to common header file - draco: improve dtb naming - draco: set CONFIG_SYS_CBSIZE to 1024 - add generic env based led Leds can now be defined in Environment - add generic env based dfu button Which gpio is used for the dfu button can be defined through the Environment - set MACH_TYPE only if defined - draco: increase CPU freq to 300MHz - Add time command to siemens am33xx boards - DDR3: increase default tRFC - draco: enable pullup for DFU and ERST pin - change print format DDR3 Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heiko Schocher <hs@denx.de>
* | fix: samsung: common: autoboot.cmd: Correct itbcfg definitionŁukasz Majewski2015-06-18-1/+1
| | | | | | | | | | | | This fix is necessary to avoid booting the default ITB configuration. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* | board/BuR/common: support timer5 for pwm-backlightHannes Petermaier2015-06-18-3/+11
| | | | | | | | | | | | | | | | | | | | in future we support yet another b&r am335x based board, where Timer 5 is wired to backlight-driver. So we introduce a new driver-type '2' to setup timer5 instead timer6. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-usbTom Rini2015-06-15-8/+180
|\ \
| * | samsung: common: add example boot scriptsPrzemyslaw Marczak2015-06-08-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds example scripts of boot.scr: - bootzimg.cmd - check if dtb exists and boot zImage - autoboot.cmd - check which image exists: Image.itb, zImage or uImage and optionally load fdt file for u/zImage The blank spaces are added to improve readability and can be removed before use mkimage. Required U-Boot environment variables: $boardname, $fdtfile, $console, $mmcbootdev, $mmcbootpart, $mmcrootdev, $mmcrootpart, $rootfstype. Making boot.scr from file.cmd: mkimage -C none -A arm -T script -d file.cmd boot.scr The Odroid XU3 default environment is ready for those boot scripts and the right script can be loaded by DFU. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | smdk5420: board: add functions to init dfu environment settingsInha Song2015-06-08-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit extends SMDK5420 board's file by adding functions: - get_dfu_alt_system() - get_dfu_alt_boot() This allows setting the DFU environment by function set_dfu_alt_info() from: board/samsung/common/misc.c Signed-off-by: Inha Song <ideal.song@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | smdk5420: board: add functions required to enable USB DWC3Joonyoung Shim2015-06-08-8/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds implementation of function calls: - usb_gadget_handle_interrupts() - board_usb_init() Which allow enable USB DWC3 gadget for this board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Inha Song <ideal.song@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* | | board: add support for Vision System's Baltos Industrial PCYegor Yefremov2015-06-15-0/+924
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vision Systems's Baltos is based on AM335x SoC from Texas Instruments. This patch adds support such Industrial PCs in mainline u-boot. [ balbi@ti.com: updated original patch to current u-boot ] Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | am33xx: Re-enable SW levelling for DDR2Tom Rini2015-06-15-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent changes for hw leveling on am33xx were not intended for DDR2 boards, only DDR3. Update emif_sdram_type to take a sdram_config value to check against. This lets us pass in the value we would use to configure, when we have not yet configured the board yet. In other cases update the call to be as functional as before and check an already programmed value in. Tested-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | highbank: add custom ahci_link_up functionMark Langsdorf2015-06-15-1/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Calxeda highbank SOC needs a custom sequence to bring up SATA links, so override ahci_link_up with custom function to handle combophy setup. Signed-off-by: Mark Langsdorf <mark.langsdorf@gmail.com> Signed-off-by: Richard Gibbs Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Andre Przywara <osp@andrep.de>
* | | ARM: highbank: add reset support for Calxeda Midway machineMark Langsdorf2015-06-12-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Calxeda Midway part has A15 cores, which do not have the Highbank A9's SCU used there for resetting the chip. Add code to distinguish between the A9 and the A15 and invoke the appropriate register writes to support the newer part. Andre: rework detection of Highbank vs. Midway Rob: fix Andre's reworked detection Signed-off-by: Mark Langsdorf <mark.langsdorf@gmail.com> Signed-off-by: Andre Przywara <osp@andrep.de> Signed-off-by: Rob Herring <robh@kernel.org>
* | | ARM: highbank: add missing SCU register setup for resetRob Herring2015-06-12-0/+6
| | | | | | | | | | | | | | | | | | | | | Andre: assign names to the magic values Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Andre Przywara <osp@andrep.de>
* | | ARM: BeagleBoard-x15: Add mux dataLokesh Vutla2015-06-12-38/+313
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding the mux data, manual and virtual mode settings for BeagleBoard-X15. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
* | | ARM: BeagleBoard-x15: Enable IO delay recalibration sequenceLokesh Vutla2015-06-12-3/+11
| | | | | | | | | | | | | | | | | | | | | Enable IO delay recalibration sequence. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
generated by cgit v1.1 at 2024-11-11 22:33:17 +0000