| Commit message (Collapse) | Author | Age | Lines |
... | |
|
|
|
|
|
|
|
|
|
| |
Add support for various boot devices like NAND, QSPINOR, SPINOR,
eMMC, EIMNOR, SATA.
Modify board level files to support the feature and add corresponding defconfig files
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_SECURE_BOOT is used for signed image building, this configuration is
not enabled at default. Comment it in mx6/mx7 common header file. Users can
uncomment it to enable.
Also add CONFIG_CSF_SIZE for defining the CSF reserved size and resize
the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 01cc7d9bc205251c13712418d51f3a4d7b20861b)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Port LDO bypass support from v2015 to support the features:
1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.
2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now
on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to
reboot whole board, so split these code to independent function so that board file
can call it freely.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align with imx_v2016.03
1. Update pmic settings to enable SD3 power and use PMIC common init codes.
2. Enable bmode.
3. Update MMC root parameters
4. Update AUXBOOT for M4
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 0816a496fbe3f7d0e4f1a9322c76908a5c557c8c)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align with imx_v2016.03.
Add emmc support which needs board rework.
Add I2C2.
Update pmic settings.
Add bmode.
Move partial code from board_early_init_f to board_init.
Add PCI power and reset GPIO and disable PCI at default.
Update QSPI settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 9613a2d07760f56b3c93779b14ad32ef69856da7)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add elan code, to handle epdc which has i2c devices.
In imx_v2015.04, the two pathces are for elan.
b6ba68516b681a38025252bd0ef6a6ed3e8adfa0
MLK-10215 Add elan init in i.MX6SL-EVK board
0c600f6a67f00fe0c674c08c355bea3789109679
MLK-10885 imx: mx6slevk ignore elan init when no epdc on board
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit cb249aa1d57788c52145d28f2e2c68cb320d8ae3)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Align board code and header file with imx_v2016.03.
Update pmic settings for i.MX6QP.
wrap spi code together using CONFIG_MXC_SPI macro.
To i.MX6SOLO, need to define nosmp in bootargs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit bb35d09d140efc7ff9b74bbcd77d7827c1dd503e)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DDR script file:
arik_r2_sdb_ddr3_528_1.14.inc
Compass link:
http://compass.freescale.net/livelink/livelink?func=ll&objid=235302593&objAction=browse&sort=name&viewType=1
Update:
setmem /32 0x020e0534 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR02 (SDQS0_B_TRIM=01, SDQS0_TRIM=10)
setmem /32 0x020e0538 = 0x00008000 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR03 (SDQS1_B_TRIM=00, SDQS1_TRIM=00)
setmem /32 0x020e053C = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR04 (SDQS2_B_TRIM=01, SDQS2_TRIM=10)
setmem /32 0x020e0540 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR05 (SDQS3_B_TRIM=01, SDQS3_TRIM=10)
setmem /32 0x020e0544 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR06 (SDQS4_B_TRIM=01, SDQS4_TRIM=10)
setmem /32 0x020e0548 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR07 (SDQS5_B_TRIM=01, SDQS5_TRIM=10)
setmem /32 0x020e054C = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR08 (SDQS6_B_TRIM=01, SDQS6_TRIM=10)
setmem /32 0x020e0550 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR09 (SDQS7_B_TRIM=01, SDQS7_TRIM=10)
setmem /32 0x021b08c0 = 0x24912489 // fine tune SDCLK duty cyc to low - seen to improve measured duty cycle of i.mx6
setmem /32 0x021b48c0 = 0x24914452
setmem /32 0x021b0018 = 0x00011740 // MMDC0_MDMISC, RALAT=0x5, WALAT=0x1
Test:
Passed stress memtester on one board.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit b7f43f47a78c9d0c14fe104daf22efab13709ab1)
(cherry picked from commit f521de2c5b79ab7f9b60b26cbe6a7ad50cfce9fa)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align ddr script with imx_v2016.03 latest ddr script.
mx6qp.cfg is 1.13 version
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/8111e4d0cd81226899be637013048281e3c097b4
http://compass.freescale.net/livelink/livelink?func=ll&objId=234753630&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.13.inc is for sabre-AI
arik_r2_sdb_ddr3_528_1.13.inc is for sabresd
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 39c2989e6ba0de6b35b2d93acd9d67f889ab4b39)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To Align with imx_v2016.03.
1. Add USDHC1 support on mother board
2. Add SPINOR flash support.
3. Add enet ref clk pinmux setting and enet settings
4. Use CONFIG_SYS_USE_EIMNOR to wrap eimnor settings.
5. update mmc board settings
6. update board_init and move nand settings to board_init, but not in
board_early_init_f
7. update pmic settings to align with datasheet.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit f05f2281548ab7b47f69b2c517eb6f85ad09a5d2)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add solo version ddr script and build target.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 54af2f744c663ac2326c1488a26fac0c4ccdad09)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since there is already CONFIG_MX6S used for i.MX6 SOLO in u-boot codes,
we don't need to add new CONFIG_MX6SOLO. Rename the existing CONFIG_MX6SOLO
to CONFIG_MX6S.
Additional, for CONFIG_MX6S, we should select CONFIG_MX6DL. The major difference
for these two chips are core number and DDR controller. So all duallite
relevant definitions can apply to solo. User can combine the two configs
if any code only apply to solo or duallite.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DDR script:
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/8111e4d0cd81226899be637013048281e3c097b4
http://compass.freescale.net/livelink/livelink?func=ll&objId=234753630&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.13.inc is for sabre-AI
Patch in imx_v2015.04:
"
commit 5fb08a4dcc7b8478fc4236b90ad8dc2190cf94e7
Author: Peng Fan <Peng.Fan@freescale.com>
Date: Wed Nov 4 16:30:47 2015 +0800
"MLK-11825 imx: mx6dqp: update ddr script to 1.13"
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit d756891b9d303e456f59a18d5fa81969a7f37337)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add mx6qarm2 new board revision support using mx6q pop SoC
Enable DRAM support for imx6q PoP SoC with populated LPDDR2
MT42L128M64D2
DDR calibration script:
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/040ee38ba9ad238fcb6053b663746d51321abb69
Test result: Stress test passed.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
(cherry picked from commit b0ac10892cad46c22accf89c04ea59c46bd9eb01)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ALign with imx_v2015.04.
Also to lpddr2 support:
From commit: "620cf5f3d4cf37b065b5857a8ea91d61bf6c471d"
"
Current uboot supports for running LPDDR2 at 400MHz on MX6Q ARM2 board,
but there is a problem in switching pre_periph_clk_sel to pll2_pfd2.
We cannot directly change the parent of pre_periph_clk_sel as this mux
is not a glitchless mux. We need to follow the correct procedure and wait
for the busy bits to clear before switching.
Change to follow the procedure:
1. Set periph_clk2 to OSC.
2. Switch the periph_clk to periph_clk2, checking the CCM_CDHIPR for
periph_clk , ahb_podf and axi_podf busy bits.
3. Setting the pre_periph_clk to PLL2 PFD 396M.
4. Switch the periph_clk back to pre_periph_clk and checking CCM_CDHIPR
busy bits.
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye.Li <ye.li@nxp.com>
(cherry picked from commit febf98c68853030ce5c1f9124e77d75456e71314)
|
|
|
|
|
|
|
| |
Add the support for i.MX6DQ PoP lpddr2 ARM2 board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit e8777e91a239599ffd231ef56c60d49b68e5e3fc)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization on mx6dq/dl arm2 board.
Need to set "CONFIG_USE_IMXIMG_PLUGIN" for this feature.
New build configurations are added for the plugin:
mx6dlarm2_lpddr2_plugin_defconfig
mx6dlarm2_plugin_defconfig
mx6qarm2_lpddr2_plugin_defconfig
configs/mx6qarm2_plugin_defconfig
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add build configurations for the plugin:
mx6ul_14x14_evk_plugin_defconfig
mx6ul_9x9_evk_plugin_defconfig
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization on mx6dq/dl/dqp sabresd and sabreauto
boards. Need to set "CONFIG_USE_IMXIMG_PLUGIN" for this feature.
Add the configurations for the plugin enabled buiding.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add the build configuration "mx6sxsabreauto_plugin_defconfig" to use the plugin.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add the build configuration "mx6sxsabresd_plugin_defconfig" to use the plugin.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add the build configuration "mx6slevk_plugin_defconfig" to use the plugin.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Add NAND pinmux settings, clock setting and related configurations.
Default not enabled, need hardware rework.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Current i.MX6UL EVK boards enable the SPL u-boot. Change it to non-SPL
for default configurations. Add two other build configurations for SPL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Enable the configurations CONFIG_MODULE_FUSE and CONFIG_OF_SYSTEM_SETUP for
module fuse check. And modify board level codes for SD, FEC and EIM.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 9232e9f7637afa3b71b43ab2d1361582ec5a080a)
|
|
|
|
|
|
|
| |
Add configurations and board codes for second enet.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 4dfd06dc649615f8dd3e1ac8018a0a7109fc4147)
|
|
|
|
|
|
|
| |
Add configurations and board codes for second enet.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit b646262f1f201e11e08968ddf88aeb8ab41fcf21)
|
|
|
|
|
|
|
| |
Add LCD configurations and TFT43AB display settings for mx6sllevk.
Enable the CONFIG_VIDEO for this feature.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Add LCD configurations and MCIMX28LCD display settings for mx6sllevk.
Enable the CONFIG_VIDEO for this feature.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Change to panel environment for display at default. Align this feature to
v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit ea93a34a3348f80462ea5b61a4ca2e9a1d267f4c)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align
the feature to v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d5f7833adf6236357cf3c139e14e46d718e20524)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align the
feature to the v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d7f54f22607ffcace6cda97984649a5ae4f65996)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx7dsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 2fc0e6ccc90989375ac6355d4f33fd4ffaca9b3a)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6ul evk board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 95cf514bb3c17014622bca26cbcbfda31cec861a)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6slevk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 3308f3c48c644938c415ead23ed9acedc2fd7981)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sxsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit ebb43ae292d43817202b71b25368516887f4686b)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sxsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit fb53c90269ead4f72028fd9bcc764e4924921a30)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sabresd and mx6qsabreauto.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 14040e07549a394500c11e815f31299e4fb0ac50)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6qarm2.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 54ea563dbe1804e426afbbf0710ffa815551d92b)
|
|
|
|
|
|
|
|
| |
Align to imx_v2015.04, dynamic setting mmcdev and mmcroot.
Then when boot linux, we can have correct "root=/dev/mmcblk[x]p2"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit b46b99a901eb194e81fc4836ee2259ad8857f4d3)
|
|
|
|
|
|
|
|
|
| |
Support epdc for mx6dlsabresd board.
Introduce a new configuration file mx6dlsabresd_epdc_defconfig.
Add related settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 467974ffda4b874e16f0c84974c3d65d85f84f6a)
|
|
|
|
|
|
|
|
|
| |
Support epdc for mx6slevk board.
Introduce a new configuration file mx6slevk_epdc_defconfig.
Add related settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 8e4304c2ab95928fb6fbb24ba83115cf1cd1e6d2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support EPDC.
E-Ink feature is supported by i.MX6DL/SL and i.MX7D.
For now this driver only supports i.MX6DL/SL, because the
i.MX7D EPDC driver needs pxp support which is not included
in U-Boot.
Support user defined logo file, if there is no logo file, it will
draw a black border around a white screen.
If need to enable EPDC, a waveform file is required to let all
work.
Since we need LCD_MONOCHROME mode for EPDC, we introduce LCD_MONOCHROME
support.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a7244f279cc3c3994bcd103f5e9a183b1075ae71)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As the HDMI splash screen feature is not well supported,
we should not set it to be the default display. In case,
users leave the 'panel' uboot environment variable empty
and connect the board with a HDMI monitor, the HDMI detect
funtion will work and enable the HDMI splash screen. So,
this patch disables HDMI detect function so that users
may only explicitly set the 'panel' variable to be 'HDMI'
to use HDMI splash screen.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit d482c54a9fbf458fdb2270cf990d8ec727823bb1)
(cherry picked from commit b484d36882c8db9ddb8262001cfef187a28051b2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Change HDMI video mode to VGA.
-Add pixel clock fraction part setting in IPU driver,
fix video mode timing issue.
-Add overflow state clear workaround,
fix kernel hang in HDMI driver issue.
-Correct IPU clock to 264MHz.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5028519b434d5dfbe53c48ac4b115ff8b69bbac7)
(cherry picked from commit 8dcbd43b971616fb67dc3b2af32e2d33f68ed0ce)
|
|
|
|
|
|
|
|
|
|
| |
vs18_enable parameter
Change to use the new way to set the vs18_enable field to 1 for fixed 1.8v I/O eMMC.
Don't use CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT any longer.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit c1bf2d975be66597f8fc25c9eef0f02bda3c5050)
|
|
|
|
|
|
|
|
|
| |
Modify and remove configurations conflicts with DM drivers from head file.
Enable DM drivers and OF_CONTROL in defconfig.
Also update the GPIO usage to call gpio_request before any gpio using, and
update power_init_board since the PMIC APIs are changed in Pfuze DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Since the DM pmic driver has changed the driver API, add a new file
pfuze_dm.c for common pfuze100 init.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
The option that we had set in board/ti/common/Kconfig as default y are
best done with imply under the appropriate main Kconfig option instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
| |
These particular SPL options are part of what the ROM provides, but for
compatibility with how we have previously used them, move them to being
implied by the board being selected.
Signed-off-by: Tom Rini <trini@konsulko.com>
|