summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
...
| * | | imx: ventana: add econfig commandTim Harvey2014-08-20-85/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks Ventana EEPROM contains a set of configuration bits that affect the removal of device-tree nodes that support peripherals that do not exist on sub-loaded boards. This patch adds: - a structure to define a config bit name, dt node alias, bit position - an array of supported configuration items - an econfig command to get/set/list configuration bits - use of the array when adjusting the FDT prior to boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: leave PCI reset de-asserted if PCI enabledTim Harvey2014-08-20-5/+3
| | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: add iomux for PCISKT_WDIS# gpioTim Harvey2014-08-20-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCISKT_WDIS# gpio allows for asserting WDIS# going to the various PCIe sockets on the Ventana board. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: enable SION bit on gpio outputsTim Harvey2014-08-20-63/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the SION bit on gpio outputs that we wish to be able to read the value of. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: configure i2c_dis# pin properly for gw53xxTim Harvey2014-08-20-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was added to the GW53xx on revB PCB's). Additionally, remove the duplicate config for GW54xx. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: add missing crlf to printTim Harvey2014-08-20-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: add video enable gpio pinmux for GW54xxTim Harvey2014-08-20-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: add appropriate delay following GSC i2c writeTim Harvey2014-08-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks System Controller EEPROM config is flash based. Add a delay following writes to avoid errors on back-to-back writes. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: remove caam disable per eeprom bitTim Harvey2014-08-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | During manufacturing this bit is not getting enabled when it should be, so we will ignore it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: set dynamic env var for flash layoutTim Harvey2014-08-20-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND devices have differing layouts with respect to page size and pages per block. These parameters affect the parameters that need to be passed to mkfs.ubifs and ubinize used to create UBI images. The various NAND chips supported by Gateworks Ventana fall into two different layouts which we refer to as 'normal' and 'large'. This layout is useful when referencing ubi files to download and flash so we create a dynamic env variable for it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | mx6sxsabresd: Update DDR initializationFabio Estevam2014-08-20-31/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the latest DDR initialization values suggested by the FSL hardware team. While at it, add some comments for clarification. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | mx31pdk: Change maintainerFabio Estevam2014-08-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently I don't have access to a mx31pdk board. Magnus was the original maintainer of the board and accepted to take back this role. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | embest/mx6boards: only toggle eMMC usdhc3 RST line on MarSboardIain Paton2014-08-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On MarS usdhc3 is eMMC, on RIoT usdhc3 is uSD and eMMC is usdhc4. Don't run the MarS specific eMMC reset code on usdhc3 when board_type == BOARD_IS_RIOTBOARD Signed-off-by: Iain Paton <ipaton0@gmail.com>
| * | | Update aristainetos board to KconfigStefano Babic2014-08-13-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | aristainetos board was merged in u-boot-imx before Kconfig was integrated, but it is not yet mainline. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-08-11-541/+16226
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | Conflicts: boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | | pmic: pmic_pfuze100: Use a shorter name for PMIC nameFabio Estevam2014-08-08-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already know it is a PMIC. Call it simply 'PFUZE100' instead. Cc: Tim Harvey <tharvey@gateworks.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-08-08-1219/+1963
| |\ \ \
| * | | | Add TQ Systems TQMa6 board supportMarkus Niebel2014-07-23-0/+971
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the changes to boards.cfg and the board directory under board/tqc. TQMa6 is a family of modules based on Freescale i.MX6. It consists of TQMa6Q (i.MX6 Quad), TQMa6D (i.MX6 Dual) featuring eMMC, and 1 GiB DDR3 TQMa6S (i.MX6 Solo) featuring eMMC and 512 MiB DDR3 The modules need a baseboard. Initially the MBa6x starterkit mainboard is supported. To easy support for other mainboards the functionality is splitted in one file for the module (tqma6.c) and one file for the baseboard (tqma6_ mba6). The modules can be boot from eMMC (on USDHC3) and SPI flash. The following features are supported: - MMC: eMMC on module (on USDHC3) and SD-card (on MBa6x mainboard) - Ethernet: RGMII using micrel KSZ9031 phy on MBa6x mainboard for TQMa6<x> module. The phy needs special configurations for the pad skew registers to adjust for the signal routing. Also support for standard ethernet commands and uppdate via tftp. - SPI: ECSPI1 with bootable serial flash on module and two additional chip selects on MBa6x - I2C: This patch adds support for the I2C busses on the TQMa6<x> modules (I2C3) and MBa6x baseboards (I2C1). The LM75 temperature sensors on TQMa6<x> and MBa6x are also configured. - USB: high speed host 1 on MBa6x and support for USB storage - PMIC: support for pfuze 100 on TQMa6<x> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | | | arm, imx6: add aristainetos boardHeiko Schocher2014-07-23-0/+716
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU: Freescale i.MX6DL rev1.1 at 792 MHz Board: aristaitenos I2C: ready DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lb07wv8 (800x480) - UART5 is console - MMC 0 and 1 - USB 0 and 1 - boot from mmc0 and spi nor flash - Splash screen support Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * | | | mx6: Remove duplication of iomuxc structureFabio Estevam2014-07-23-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to keep iomuxc_base_regs structure as it serves the exact same purpose of the iomuxc structure, which is to provide access to the GPR registers. The additional fields of iomuxc_base_regs are not used. Other advantage of 'iomuxc' is that it has a shorter name and the variable declarations can fit into a single line. So remove iomuxc_base_regs structure and use iomuxc instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | | mx6sxsabresd: Add PFUZE100 PMIC supportFabio Estevam2014-07-23-0/+84
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | | Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2014-07-16-23781/+2781
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> Conflicts: boards.cfg
| * | | | | mx6sx: Add initial support for mx6sxsabresd boardFabio Estevam2014-07-10-0/+206
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | | | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2014-08-29-25/+8
|\ \ \ \ \ \
| * | | | | | sunxi: Add environment settings to make extlinux.conf booting workHans de Goede2014-08-12-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Automatic booting using an extlinux.conf file requires various environment variables to be set. Also modify CONFIG_SYS_LOAD_ADDR and CONFIG_STANDALONE_LOAD_ADDR to match the value chosen for kernel_addr_r, see the added comment for why the new value is chosen. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | | | | | sunxi: Kconfig: move common settings into a shared code blockHans de Goede2014-08-12-26/+6
| | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SYS_CPU, SYS_BOARD and SYS_SOC are identical for all sunxi boards, move them to a shared code block. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-08-28-2/+458
|\ \ \ \ \ \ | |/ / / / /
| * | | | | Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-08-09-2/+458
| |\ \ \ \ \
| | * | | | | sun7i: Add bananapi boardHans de Goede2014-07-31-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | | | sun7i: Add support for a number of new sun7i boardsHans de Goede2014-07-31-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for boards which I own and which already have a dts file in the upstream kernel. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | | | sun5i: Add support for a number of new sun5i boardsHans de Goede2014-07-31-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for boards which I own and which already have a dts file in the upstream kernel. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | | | sun4i: Add support for a number of new sun4i boardsHans de Goede2014-07-31-2/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for boards which I own and which already have a dts file in the upstream kernel. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | | | ahci: provide sunxi SATA driver using AHCI platform frameworkIan Campbell2014-07-31-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done for sun7i only since I don't have access to any other sunxi platforms with sata included. The PHY setup is derived from the Alwinner releases and Linux, but is mostly undocumented. The Allwinner AHCI controller also requires some magic (and, again, undocumented) DMA initialisation when starting a port. This is added under a suitable ifdef. This option is enabled for Cubieboard, Cubieboard2 and Cubietruck based on contents of Linux DTS files, including SATA power pin config taken from the DTS. All build tested, but runtime tested on Cubieboard2 and Cubietruck only. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | | | | | mtd, ubi, ubifs: resync with Linux-3.14Heiko Schocher2014-08-25-0/+14
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | resync ubi subsystem with linux: commit 455c6fdbd219161bd09b1165f11699d6d73de11c Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sun Mar 30 20:40:15 2014 -0700 Linux 3.14 A nice side effect of this, is we introduce UBI Fastmap support to U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Joerg Krause <jkrause@posteo.de>
* | | | | | nios2: remove obsolete PCI5441 and PK1C20 boardsThomas Chou2014-08-24-362/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | | | | | davinci: orphan some Davinci boardsMasahiro Yamada2014-08-21-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emails to Sandeep Paulraj <s-paulraj@ti.com> have been bouncing. Please assign new maintainer(s) to get these boards back to Maintained. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
* | | | | | powerpc: mpc8xx: remove FLAGADM board supportMasahiro Yamada2014-08-21-1049/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been orphaned for a while and old enough. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | | | powerpc: mpc8xx: remove GEN860T, GEN806T_SC board supportMasahiro Yamada2014-08-21-2183/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards have been orphaned for a while and old enough. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | | | powerpc: mpc8xx: remove SXNI855T board supportMasahiro Yamada2014-08-21-3198/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been orphaned for a while and old enough. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | | | powerpc: mpc8xx: remove svm_sc8xx boardMasahiro Yamada2014-08-21-1048/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been orphaned for a while and old enough. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | | | powerpc: mpc8xx: remove stxxtc board supportMasahiro Yamada2014-08-21-883/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been orphaned for a while and old enough. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | | | omap: remove omap5912osk board supportMasahiro Yamada2014-08-21-852/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emails to the board maintainer "Rishi Bhattacharya <rishi@ti.com>" have been bouncing. Tom suggested to remove this board. Remove also omap1510_udc.c because this is the last board to enable it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-08-20-148/+579
|\ \ \ \ \ \
| * | | | | | kmp204x: reset the Zarlink clocking chips at power up onlyValentin Longchamp2014-08-20-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is the requirement on the chassis's backplane that when the clocks have been enabled, they then should not disappear. Resetting the Zarlink clocking chips at unit reset violates this requirement because the backplane clocks are not supplied during the reset time. To avoid this side effect, both the Zarlink clocking chips are reset only at power up. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
| * | | | | | powerpc/t4qds: Move doc/README.t4240qds under board/freescale/t4qdsYork Sun2014-08-20-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board specific README file should be moved to board folder. Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | | | powerpc/T4240QDS/eth: some fix for XFIShaohui Xie2014-08-20-18/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFI is supported on T4QDS-XFI board, which removed slot3, and four LANEs of serdes2 are routed to a SFP+ cages, which to house fiber cable or direct attach cable(copper), the copper cable is used to emulate the 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. For fiber cable, there is NO PHY, while for copper cable, we need to use internal PHY which exist in Serdes to do auto-negotiation and link training, which implemented in kernel. We use hwconfig to define cable type for XFI, and fixup dtb based on the cable type. For copper cable, set below env in hwconfig: fsl_10gkr_copper:<10g_mac_name> the <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2. The four <10g_mac_name>s do not have to be coexist in hwconfig. For XFI ports, if a given 10G port will use the copper cable for 10GBASE-KR, set the <10g_mac_name> of the port in hwconfig, otherwise, fiber cable will be assumed to be used for the port. For ex. if four XFI ports will both use copper cable, the hwconfig should contain: fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm2_10g1,fm2_10g2 For fiber cable: 1. give PHY address to a XFI port, otherwise, the XFI ports will not be available in U-boot, there is no PHY physically for XFI when using fiber cable, this is just to make U-boot happy and we can use the XFI ports in U-boot. 2. fixup dtb to use fixed-link in case of fiber cable which has no PHY. Kernel requests that a MAC must have a PHY or fixed-link. When using XFI protocol, the MAC 9/10 on FM1 should init as 10G interface. Change serdes 2 protocol 56 to 55 which has same feature as 56 since 56 is not valid any longer. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | | powerpc/t104xrdb: support deep sleep in SPI/SD bootTang Yuantian2014-08-12-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add deep sleep support in SPI/SD boot. The destination address second stage uboot image is loaded to is changed because currently this address will be used by kernel which means we can't reserve it for resume. Entry point to kernel is still placed in second stage uboot. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | | powerpc/t1042RDB: Add Video - HDMI supportJason Jin2014-08-12-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1042 has internal display interface unit (DIU) for driving video. T1042RDB supports video mode via -LCD using TI enconder -HDMI type interface via HDMI encoder Chrontel, CH7301C encoder which is I2C programmable is used as HDMI connector on T1042RDB. This patch add support to -enable Video interface for T1042RDB -route qixis multiplexing to enable DIU-HDMI interface on board -program DIU pixel clock gerenartor for T1042 -program HDMI encoder via I2C on board This patch refer to the upstream diu patch (337b0c52b3296f371d04aef71a833e09110e0e6b) for T1040qds. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> [York Sun: resolve conflict and move changes to T104xRDB.h] Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | | fsl/diu: ch7301 encoder split off from t1040qds/diu.cWang Dongsheng2014-08-12-126/+159
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ch7301 encoder not only used in t1040qds platform, so we split it for t1042rdb and LSx platform. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | | | samsung: dfu: Provide correct Vendor and Product IDs for UMS gadgetLukasz Majewski2014-08-20-1/+4
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is necessary to provide the same Vendor and Product IDs as the one in the original Linux kernel code. Without this change the USB mass storage gadget is not working with Windows7. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2025-01-03 23:03:48 +0000