summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* MLK-12436-3: mx6qarm2: add new board revision supportPeng Fan2016-03-25-0/+294
| | | | | | | | | | | | | | Add mx6qarm2 new board revision support using mx6q pop SoC Enable DRAM support for imx6q PoP SoC with populated LPDDR2 MT42L128M64D2 DDR calibration script: http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/040ee38ba9ad238fcb6053b663746d51321abb69 Test result: Stress test passed. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
* MLK-12436-2: mx6qarm2: update ddr scriptsPeng Fan2016-03-25-1/+179
| | | | | | | | | | | | | | | | | | | | | | | ALign with imx_v2015.04. Also to lpddr2 support: From commit: "620cf5f3d4cf37b065b5857a8ea91d61bf6c471d" " Current uboot supports for running LPDDR2 at 400MHz on MX6Q ARM2 board, but there is a problem in switching pre_periph_clk_sel to pll2_pfd2. We cannot directly change the parent of pre_periph_clk_sel as this mux is not a glitchless mux. We need to follow the correct procedure and wait for the busy bits to clear before switching. Change to follow the procedure: 1. Set periph_clk2 to OSC. 2. Switch the periph_clk to periph_clk2, checking the CCM_CDHIPR for periph_clk , ahb_podf and axi_podf busy bits. 3. Setting the pre_periph_clk to PLL2 PFD 396M. 4. Switch the periph_clk back to pre_periph_clk and checking CCM_CDHIPR busy bits. " Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye.Li <ye.li@nxp.com>
* MLK-12436-1: mx6qarm2: support lpddr2 boardPeng Fan2016-03-25-2/+7
| | | | | | Support lpddr2 board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12440-10 mx6dq/dl: Add plugin boot support for arm2 boardsYe Li2016-03-25-3/+1195
| | | | | | | Add plugin.S for plugin boot initialization on mx6dq/dl arm2 board. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12440-9 mx6dq/dl/dqp: Add plugin boot support for sabre boardsYe Li2016-03-25-7/+1370
| | | | | | | | Add plugin.S for plugin boot initialization on mx6dq/dl/dqp sabresd board and sabreauto board. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12440-8 mx6slevk: Add plugin boot supportYe Li2016-03-25-2/+199
| | | | | | | Add plugin.S for plugin boot initialization on mx6slevk board. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12440-7 mx6sxsabreauto: Add plugin boot supportYe Li2016-03-25-1/+148
| | | | | | | Add plugin.S for plugin boot initialization on mx6sxsabreauto board. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12440-6 mx6sxsabresd: Add plugin boot supportYe Li2016-03-25-2/+147
| | | | | | | Add plugin.S for plugin boot initialization on mx6sxsabresd board. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12440-5 mx7dsabresd: Add plugin boot supportYe Li2016-03-25-2/+233
| | | | | | | Add plugin.S for plugin boot initialization on mx7dsabresd board. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12440-4 mx6ulevk: Add plugin boot supportYe Li2016-03-25-0/+368
| | | | | | | Add plugin.S for plugin boot initialization. Need to enable "CONFIG_USE_PLUGIN" for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12437-6 mx7dsabresd: Update display to support panel selectionYe Li2016-03-25-7/+24
| | | | | | | Change to panel environment for display at default. Align this feature to v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12437-5 mx6ulevk: Update display to support panel selectionYe Li2016-03-25-8/+25
| | | | | | | Change to panel environment for display at default. Align this feature to v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12437-4 mx6sxsabreauto: Update display to support panel selectionYe Li2016-03-25-0/+105
| | | | | | | Support two display panels, one for LVDS, another for parallel LCD. Align the feature to v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12437-3 mx6sxsabresd: Update display to support panel selectionYe Li2016-03-25-8/+84
| | | | | | | Support two display panels, one for LVDS, another for parallel LCD. Align the feature to the v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12434-8: mx7dsabresd: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-35/+2
| | | | | | Dynamic setting mmcdev and mmcroot for mx7dsabresd. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-7: mx6ulevk: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-0/+4
| | | | | | Dynamic setting mmcdev and mmcroot for mx6ul evk board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-6: mx6slevk: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-0/+8
| | | | | | Dynamic setting mmcdev and mmcroot for mx6slevk. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-5: mx6sxsabreauto: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-1/+19
| | | | | | Dynamic setting mmcdev and mmcroot for mx6sxsabresd. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-4: mx6sxsabresd: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-1/+16
| | | | | | Dynamic setting mmcdev and mmcroot for mx6sxsabresd. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-3: mx6sabre: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-1/+34
| | | | | | Dynamic setting mmcdev and mmcroot for mx6sabresd and mx6qsabreauto. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-2: mx6qarm2: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-1/+16
| | | | | | Dynamic setting mmcdev and mmcroot for mx6qarm2. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12434-1: imx: dynamic setting mmcdev and mmcrootPeng Fan2016-03-25-0/+49
| | | | | | | Align to imx_v2015.04, dynamic setting mmcdev and mmcroot. Then when boot linux, we can have correct "root=/dev/mmcblk[x]p2" Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-7: mx7dsabresd: support epdcPeng Fan2016-03-25-0/+220
| | | | | | | | Support epdc for mx7dsabresd board. Introduce a new configuration file mx7dsabresd_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-5: mx7dsabresd: introduce iox74lv_setPeng Fan2016-03-25-1/+39
| | | | | | Introduce iox74lv_set function. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-4: mx6dlsabresd: support epdcPeng Fan2016-03-25-0/+245
| | | | | | | | Support epdc for mx6dlsabresd board. Introduce a new configuration file mx6dlsabresd_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-3: mx6slevk: support epdcPeng Fan2016-03-25-1/+242
| | | | | | | | Support epdc for mx6slevk board. Introduce a new configuration file mx6slevk_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-2: video: epdc: introduce epdc supportPeng Fan2016-03-25-0/+220
| | | | | | | | | | | | | | | | | | | | | | | | Support EPDC. E-Ink feature is supported by i.MX6DL/SL and i.MX7D. For now this driver only supports i.MX6DL/SL, because the i.MX7D EPDC driver needs pxp support which is not included in U-Boot. Support user defined logo file, if there is no logo file, it will draw a black border around a white screen. If need to enable EPDC, a waveform file is required to let all work. Since we need LCD_MONOCHROME mode for EPDC, we introduce LCD_MONOCHROME support. Please refer to Linux Reference Manual for how to flash WAVEFORM file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Robby Cai <R63905@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11304 MX6 SabreSD: Disable HDMI detectPeng Fan2016-03-25-1/+1
| | | | | | | | | | | | | | | | As the HDMI splash screen feature is not well supported, we should not set it to be the default display. In case, users leave the 'panel' uboot environment variable empty and connect the board with a HDMI monitor, the HDMI detect funtion will work and enable the HDMI splash screen. So, this patch disables HDMI detect function so that users may only explicitly set the 'panel' variable to be 'HDMI' to use HDMI splash screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit d482c54a9fbf458fdb2270cf990d8ec727823bb1)
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2016-03-25-11/+11
| | | | | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5028519b434d5dfbe53c48ac4b115ff8b69bbac7)
* MLK-12416-3: imx: mx6ul evk: support NANDPeng Fan2016-03-25-1/+67
| | | | | | | Add NAND pinmux settings and related macros. Default not enabled, need hardware rework. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12416-1: imx: mx6ul evk: switch to non SPLPeng Fan2016-03-25-0/+308
| | | | | | Switch to default not support SPL. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* mx6slevk: Fix the power up of the Ethernet PHYFabio Estevam2016-03-13-5/+4
| | | | | | | | | GPIO4_21 is the LAN8720 power pin, not the LAN8720 reset pin. Fix that, so that we can have Ethernet functional again. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* board: tbs2910: Fix eMMC BOOTCFG valueSoeren Moch2016-03-02-1/+1
| | | | | | | | | Fix the BOOTCFG value for eMMC in the same way as commit 214c3f0f9921250eb336c7effadcc16158ea9df5 [imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure] did for sabresd. Signed-off-by: Soeren Moch <smoch@web.de>
* mx6qarm2: Update maintainer's emailsFabio Estevam2016-03-02-2/+2
| | | | | | Use the new NXP emails. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* MAINTAINERS: Update Peng Fan's email addressFabio Estevam2016-03-02-3/+3
| | | | | | | Use Peng Fan's new NXP email address in MAINTAINERS files. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* sniper: Various minor cleanups, missing Kconfig configs and reorganisationPaul Kocialkowski2016-02-29-331/+331
| | | | | | | | This introduces some minor cleanups, regarding aspects such as board name, code and headers organization as well as deprecated and missing config options. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-02-24-105/+95
|\
| * armv7: ls102xa: Move smmu and stream id initialization into the common soc codeAlison Wang2016-02-24-83/+2
| | | | | | | | | | | | | | | | The initialization for smmu and stream id is moved into the common soc code. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLCZhao Qiang2016-02-24-10/+43
| | | | | | | | | | | | | | | | | | QE-HDLC and USB multi-use the pins, modify the pin-muxing code for them, when set "hwconfig=qe-hdlc" in uboot, assign the pins to QE-HDLC, if not, assgin it to USB Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: ls1043rdb: Move USB muxing config to config_board_muxZhao Qiang2016-02-24-15/+15
| | | | | | | | | | | | | | | | Pin-muxing code should be in config_board_mux, move USB muxing config to config_board_mux. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: ls1043ardb: Add micro QE support for ls1043ardbZhao Qiang2016-02-24-0/+8
| | | | | | | | | | Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/ls1043aqds: Add USB support for ls1043aqdsQianyu Gong2016-02-24-0/+15
| | | | | | | | | | | | | | Add USB XHCI support for ls1043qds board. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * qe: move drivers/qe/qe.h to include/fsl_qe.hQianyu Gong2016-02-24-4/+4
| | | | | | | | | | | | | | | | As the QE firmware struct is shared with Fman, move the header file out of drivers/qe/. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS boardAlison Wang2016-02-24-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | rpi: set board serial number in environmentLubomir Rintel2016-02-24-0/+33
| | | | | | | | | | | | | | | | | | Gets propagated into the device tree and then into /proc/cpuinfo where users often expect it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
* | arm: am437x: cm-t43: set MPU and CORE voltages on bootNikita Kiryanov2016-02-24-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators are not updated. This is not a problem in cold boot since the default values that the pmic outputs are correct, but if Linux were to switch the module to a low power OPP, the new voltage values will be retained after a reboot and the module will likely hang once U-Boot raises the CPU frequency back up. Set both CORE and MPU regulators to to 1.1V on boot. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am437x: cm-t43: get rid of enable_vtt_regulator()Nikita Kiryanov2016-02-24-12/+0
| | | | | | | | | | | | | | | | | | | | | | CM-T43 does not have a vtt regulator. Remove the function that's supposed to enable it. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am437x: cm-t43: set tps fseal bitNikita Kiryanov2016-02-24-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | Set TPS65218 FSEAL bit to 1 so that RTC could be powered using on-board 3V battery. This is necessary so that time and date will survive reboots and power offs. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am437x: cm-t43: split board fileNikita Kiryanov2016-02-24-140/+150
| | | | | | | | | | | | | | | | | | | | | | Simplify the board file by splitting it to spl portion and u-boot portion. Some unnecessary includes were identified and removed. No functional changes. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board/BuR: drop ETH-support in SPL-StageHannes Schmelzer2016-02-24-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | During very early prototype-phase we did boot the AM335x boards initially from CPSW-EMAC. Now we don't need this feature anymore. So we drop it to save MLO-space and having therefore a more quickly boot. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-12-22 08:43:37 +0000