summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* ppc: xilinx-ppc4xx: Port to DM serialRicardo Ribalda Delgado2016-01-27-2/+8
| | | | | | | | | | | xilinx_uartlite has been ported to DM, this patch makes the xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new DM driver. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: zynqmp: Line up checkboard messageMichal Simek2016-01-27-2/+2
| | | | | | | | | Use space instead of tab in checkboard print to aligned it with others boards. Reported-by: David Glessner <david.glessner@rockwellcollins.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
* ARM64: zynqmp: Remove unneeded timer_init functionMichal Simek2016-01-27-5/+0
| | | | | | Empty weak function is used instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Fix bootmode SD_MODE1Michal Simek2016-01-27-1/+4
| | | | | | | | | | | | | When only sdhci1 IP is enabled and SD_MODE1 bootmode is selected U-Boot using sdboot1 variable which refers to mmc dev 1. But this device doesn't exist because only one controller is available. This patch fix logic around sdboot mode with using sdbootdev internal variable. Reported-by: Chris Kohn <ckohn@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Differentiate EMMC boot modeMichal Simek2016-01-27-1/+4
| | | | | | | | Show also EMMC bootmode if selected. There is difference compare to SD bootmode. Use the same bootcommand till better boot command is created. Reported-by: Sai Pavan Boddu <saipava@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Show information about bootmodeMichal Simek2016-01-27-1/+7
| | | | | | | Showing information about bootmode is very useful to make sure that correct bootmode is selected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Add support for SD1 boot modeMichal Simek2016-01-27-0/+6
| | | | | | | SD1 boot mode is using different bootmode values. Add support for this mode used on DC1. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Modify the SD and QSPI bootmode valuesSiva Durga Prasad Paladugu2016-01-27-0/+7
| | | | | | | | Modify the SD bootmode value to 0x3 as per latest spec. Also add new boot mode QSPI 32 bit boot mode Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Use the same U-Boot version with/without ATFMichal Simek2016-01-27-4/+13
| | | | | | | | Remove SECURE_IOU option which is not needed. U-Boot itself can detect which EL level it is on and based on that use do platform setup. It also simplify usage because one Kconfig entry is gone. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Fix board_init calling sequenceMichal Simek2016-01-27-2/+4
| | | | | | | board_init() is in final elf file but it is not called at all. Use board_init_late() instead and call gpio_init() from it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Read information about RAM from DTMichal Simek2016-01-27-13/+0
| | | | | | Do not setup ram start/size in board file. Read it from DT instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove systemace from board fileMichal Simek2016-01-27-5/+0
| | | | | | | Systemace is ancient IP which is not tested. Remove it from default configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: emaclite: Move emaclite to KconfigMichal Simek2016-01-27-3/+0
| | | | | | | Add PHYLIB and MII dependencies and enable it by default for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: emaclite: Move driver to DMMichal Simek2016-01-27-41/+0
| | | | | | | Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: axi_emac: Move driver to DMMichal Simek2016-01-27-9/+0
| | | | | | | Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* microblaze: Remove unused I2C macrosMichal Simek2016-01-27-5/+0
| | | | | | There is no i2c driver in the current u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* serial: uartlite: Add uartlite to KconfigMichal Simek2016-01-27-4/+0
| | | | | | | | - Move config option out of board file. - Remove uartlite address from config file Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
* ppc: xilinx-ppc4xx-generic: Update xparameters.hRicardo Ribalda Delgado2016-01-27-8/+8
| | | | | | | | | | | -Remove UART address (It is now part of the dts). -Include dummy ns16550 clock -Fix address to last test Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: pp440-generic: Simplify MakefileRicardo Ribalda Delgado2016-01-27-2/+2
| | | | | | | | | | | | As a result of the specific board removal, the Makefiles can be simplified. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: pp405-generic: Simplify MakefileRicardo Ribalda Delgado2016-01-27-1/+1
| | | | | | | | | | | | As a result of the specific board removal, the Makefiles can be simplified. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* mailaddr: Update mail addressRicardo Ribalda Delgado2016-01-27-9/+9
| | | | | | | | | | | The old mail address will stop working soon. Update it all the files Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* xilinx-ppc440: Remove support for v5fx30tevalRicardo Ribalda Delgado2016-01-27-69/+0
| | | | | | | | | | | It is just a specialized version of xilinx-ppc440 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx-ppc405: Remove support for fx12mmRicardo Ribalda Delgado2016-01-27-99/+0
| | | | | | | | | | | It is just a specialized version of the xilinx-ppc405 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx-ppc440: Remove support for ml507Ricardo Ribalda Delgado2016-01-27-70/+0
| | | | | | | | | | | ml507 is just a specialized version of the xilinx-ppc440-generic Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-01-26-9/+21
|\
| * sunxi: power: axp818: Enable support for ALDOsChen-Yu Tsai2016-01-26-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | Previously, AXP818 ALDO support was partially added to Kconfig, but never enabled in the board file, nor properly set or configured in Kconfig. The boards continue to work because the AXP818 is designed to pair with the A83T/H8, and the default voltages match the reference design's requirements. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * power: axp: merge separate DLDO functions into 1Chen-Yu Tsai2016-01-26-4/+4
| | | | | | | | | | | | | | | | | | | | | | Instead of one function for each DLDO regulator, make 1 function that takes an extra "index". Since the control bits for the DLDO regulators are contiguous, this makes the function very simple. This removes a lot of duplicate code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add suport for A83T based Banana-pi M3 BoardVishnu Patekar2016-01-26-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Groundwork to support new dram type for A83TVishnu Patekar2016-01-26-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Different A83T boards have different DRAM types. Banapi M3 has LPDDR3, Allwinner Homlet v1.2 has DDR3. This adds groundwork to support for new DRAM type for A83T. Introduce CONFIG_DRAM_TYPE, It'll be 3 for DDR3 and 7 for LPDDR3, must be set in respective board defconfig. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Enable booting non-secure and virtualization for H3Chen-Yu Tsai2016-01-26-0/+3
| | | | | | | | | | | | | | | | | | Now that we support PSCI and various security switches, we can let U-boot boot Linux into non-secure and HYP mode. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2016-01-25-66/+28
|\ \ | |/ |/|
| * powerpc/board/t4240rdb: Enable VID supportYing Zhang2016-01-25-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board/freescale/common: Check IR chip mode for VID supportYing Zhang2016-01-25-1/+20
| | | | | | | | | | | | | | | | | | IR chip on all the boards are required to be used in Intel mode to support VID. VDD will not be adjusted if IR chip is used in other modes. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * powerpc: mpc85xx: Move set_liodns, setup_portals to common boot seqPrabhakar Kushwaha2016-01-25-65/+0
| | | | | | | | | | | | | | | | | | | | | | | | Users migrating Freescale's PowerPC SoC U-Boot code to their custom board, often overlook the need to execute set_liodns() and setup_portals() being called by platform files. So Move set_liodns() and setup_portals() to common u-boot boot sequence Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2016-01-25-11/+42
|\ \
| * | imx: mx7dsabresd: support nandPeng Fan2016-01-24-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux settings. Add related macro definitions. Nand pin conflicts with emmc, so if want to enable nand, need to do hardware rework. After hardware rework, define CONFIG_NAND_MXS in board header file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | mx25pdk: Remove lowlevel_init.S fileFabio Estevam2016-01-24-11/+3
| |/ | | | | | | | | | | | | | | As the lowlevel_init function is empty we should better remove this assembly file entirely and use a dummy C function instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | powerpc: tqm834x: Fix build warnings in initdram()Bin Meng2016-01-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With gcc 4.9, it produces the following warnings: CC board/tqc/tqm834x/tqm834x.o board/tqc/tqm834x/tqm834x.c: In function 'initdram': board/tqc/tqm834x/tqm834x.c:325:12: warning: iteration 3u invokes undefined behavior [-Waggressive-loop-optimizations] (((base + size - 1) >> CSBNDS_EA_SHIFT) & ^ board/tqc/tqm834x/tqm834x.c:80:2: note: containing loop for(cs = 0; cs < 4; ++cs) { ^ There is an integer overflow when cs = 3. To fix it, change parameters of set_cs_bounds() to ulong. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | sh: sh7753evb: Fix build errorBin Meng2016-01-25-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently buildman fails to build sh7753evb and reports the following: board/renesas/sh7753evb/built-in.o: In function 'init_gether_mdio': board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_ADDR_BASE' board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_DATA_BASE' board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_addr_val' board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_data_val' make: *** [u-boot] Error 1 The fix is to wrap any codes that access these macros with CONFIG_SH_32BIT. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: ivybridge: Move northbridge and PCH init into driversSimon Glass2016-01-24-8/+0
|/ | | | | | | | | | Instead of calling the northbridge and PCH init from bd82x6x_init_extra() when the PCI bus is probed, call it from the respective drivers. Also drop the Northbridge init as it has no effect. The registers it touches appear to be read-only. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* rockchip: Add support for Raxda Rock 2Simon Glass2016-01-21-0/+35
| | | | | | | | | | | | This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: kylin: Check fastboot requestJeffy Chen2016-01-21-0/+32
| | | | | | | | | We will save boot mode flag in grf's os_reg[4], if fastboot requested or fastboot key pressed, try to enter fastboot mode at preboot stage. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-21-17/+0
|\
| * dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass2016-01-20-17/+0
| | | | | | | | | | | | | | | | Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* | sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-21-0/+12
|/ | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* igep00x0: Cleanup ethernet supportLadislav Michl2016-01-20-14/+19
| | | | | | | | | | | - move chip reset to separate function - use CONFIG_SMC911X_BASE instead of hardcoded value - remove unneeded local variable from board_eth_init. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mkMasahiro Yamada2016-01-20-6/+0
| | | | | | | | | | The include/configs/yucca.h already has the same define: #define CONFIG_SYS_TEXT_BASE 0xfffb0000 Remove the redundant one from board/amcc/yucca/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stefan Roese <sr@denx.de>
* mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-16/+0
| | | | | | | | | | We can delete board/pb1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-16/+0
| | | | | | | | | | We can delete board/dbau1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-13/+0
| | | | | | | | | | We can delete board/micronas/vct/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
generated by cgit v1.1 at 2024-11-09 06:11:25 +0000