summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
...
| * | sun5i: Add defconfig and dts file for the Empire Electronix M712 tabletHans de Goede2016-08-26-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sun6i: Add defconfig and dts file for tablets using the inet-q972 PCBHans de Goede2016-08-26-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a defconfig and dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | treewide: fix "followings" to "following"Masahiro Yamada2016-08-26-1/+1
|/ | | | | | Most of them are my mistakes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2016-08-20-41/+2084
|\ | | | | | | | | [trini: Drop CMD_BOOTI as it's now on by default on ARM64] Signed-off-by: Tom Rini <trini@konsulko.com>
| * ARM: rmobile: lager: Move rcar-gen2-common to rcar-commonNobuhiro Iwamatsu2016-08-17-1/+1
| | | | | | | | | | | | | | To common use of rcar-gen2-common directory in the R-Car SoCs, and change from rcar-gen2-common to rcar-common. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: Fix HDMI output for BLANCHE boardmasakazu.mochizuki.wd@hitachi.com2016-08-17-0/+30
| | | | | | | | | | | | | | This commit fixes HDMI output for BLANCHE board Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: Add BLANCHE board supportmasakazu.mochizuki.wd@hitachi.com2016-08-17-0/+1857
| | | | | | | | | | | | | | | | | | | | BLANCHE is development board based on R-Car V2H SoC (R8A7792) This commit supports the following periherals: - SCIF, Ethernet, QSPI, MMC Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: rmobile: rcar-common: Fix warning of type differenceNobuhiro Iwamatsu2016-08-17-2/+4
| | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: rmobile: Add support salvator-x boardNobuhiro Iwamatsu2016-08-17-0/+150
| | | | | | | | | | | | | | | | Salvator-x is an entry level development board based on R-Car H3 SoC (R8A7795). This commit supports SCIF only. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: rmobile: Add support R-Car Generation 3Nobuhiro Iwamatsu2016-08-17-1/+5
| | | | | | | | | | | | | | This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: rmobile: Move rcar-gen2-common to rcar-commonNobuhiro Iwamatsu2016-08-17-7/+7
| | | | | | | | | | | | | | To common use of rcar-gen2-common directory in the R-Car SoCs, and change from rcar-gen2-common to rcar-common. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILENobuhiro Iwamatsu2016-08-17-30/+30
| | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | x86: Add theadorable-x86-dfi-bt700 board supportStefan Roese2016-08-16-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the BayTrail based theadorable-x86-dfi-bt700 board which uses the DFI BT700 BayTrail Qseven SoM on a custom baseboard. The main difference to the DFI baseboard is, that it isn't equipped with a Super IO chip and uses the internal HS SIO UART (memory mapped PCI based) as the console UART. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add DFI BT700 BayTrail board supportStefan Roese2016-08-16-0/+139
| | | | | | | | | | | | | | | | | | | | This patch adds support for the DFI BayTrail BT700 QSeven SoM installed on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton NCT6102D Super IO chip providing the UART as console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config codeStefan Roese2016-08-16-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch includes the following changes: - Remove Designware I2C support from dts as its not used - Configure SMBus PADs in dts - Enable I2C commands and I2C support - Configure SMSC2513 USB hub via SMBus upon startup - Move environment location to match Minnowmax example - Enhancement of the default environment Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: bayleybay: Add PS/2 keyboard and mouse to ASL fileBin Meng2016-08-16-0/+38
| | | | | | | | | | | | | | | | | | Without PS/2 keyboard and mouse in the ASL file, Windows does not see them. No problem for Linux as it probes keyboard and mouse via the legacy 8042 I/O port. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | x86: conga-qeval20-qa3: Add missing MAINTERNERS entryStefan Roese2016-08-16-0/+1
| | | | | | | | | | | | | | | | | | | | Add entry for the missing internal UART defconfig to the MAINTAINERS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | xtensa: add support for the 'xtfpga' evaluation boardChris Zankel2016-08-15-0/+293
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'xtfpga' board is actually a set of FPGA evaluation boards that can be configured to run an Xtensa processor. - Avnet Xilinx LX60 - Avnet Xilinx LX110 - Avnet Xilinx LX200 - Xilinx ML605 - Xilinx KC705 These boards share the same components (open-ethernet, ns16550 serial, lcd display, flash, etc.). Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | vexpress: Check TC2 firmware support before defaulting to nonsec bootingJon Medhurst \(Tixy\)2016-08-15-0/+34
| | | | | | | | | | | | | | | | | | | | The firmware on TC2 needs to be configured appropriately before booting in nonsec mode will work as expected, so test for this and fall back to sec mode if required. Signed-off-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-08-15-18/+101
|\ \
| * | net: mii: Fix changes made by spatchJoe Hershberger2016-08-15-2/+1
| | | | | | | | | | | | | | | | | | | | | Some of the changes were a bit too complex. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | net: mii: Use spatch to update miiphy_registerJoe Hershberger2016-08-15-18/+102
| | | | | | | | | | | | | | | | | | | | | Run scripts/coccinelle/net/mdio_register.cocci on the U-Boot code base. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | ARM: tegra: set vdd_core for Jetson TK1Bibek Basu2016-08-15-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Program vdd_core for Jetson TK1 to 1V, which is the max safe voltage for ultra low temperature operations. vdd_cpu and vdd_gpu are already at 1V. Signed-off-by: Bibek Basu <bbasu@nvidia.com> (swarren: fixed comments to better match the code) (swarren: moved board ifdef around data in header, made code generic) (swarren: fixed typos in commit description) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | ARM: tegra: enable PCIe controller on p2771-0000Stephen Warren2016-08-15-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | p2771-0000 has a couple of PCIe ports; one physically x4 desktop PCI connector (which may run at x2 electrically, depending on the board version and configuration) and a x1 connection to the M.2 slot (which may not be active, depending on the board version and configuration). This change enables those. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | ARM: tegra: enable SD card on p2771-0000Stephen Warren2016-08-15-0/+26
|/ / | | | | | | | | | | | | | | | | | | Now that clock and reset drivers exist for Tegra186, we can enable the SD card controller. Now that a BPMP I2C driver exists for Tegra186, we can communicate with the PMIC to enable power to the SD card. Hook up the DT content and board code required to make the SD card work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | kconfig: use bool instead of boolean for type definition attributesMasahiro Yamada2016-08-12-8/+8
| | | | | | | | | | | | | | | | | | | | Linux stopped the use of keyword 'boolean' in Kconfig. Refer to commit 6341e62b212a2541efb0160c470e90bd226d5496 ("kconfig: use bool instead of boolean for type definition attributes") in Linux Kernel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge git://git.denx.de/u-boot-rockchipTom Rini2016-08-06-0/+135
|\ \
| * | rockchip: add support for rk3288 miniarm boardXu Ziyuan2016-08-05-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | Miniarm is a rockchip rk3288 based development board, which has lots of interface such as HDMI, USB, micro-SD card, Audio etc. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | rockchip: add fastboot support for rk3036 boardXu Ziyuan2016-08-05-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | Enable fastboot feature on rk3036, please refer to doc/README.rockchip for more detailed usage. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | omap3: Drop omap3_evm_quick_* targetsTom Rini2016-08-05-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | These config targets were added well before the Kconfig migration began as a way to demonstrate how to make these platforms work with cut down features. At this point in time they no longer serve a good purpose so remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | arc: Rename AXS101 board to more generic AXS10xAlexey Brodkin2016-08-05-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of now we have 2 flavors of ARC SDP boards: 1) AXS101 - with ARC770 in ASIC 2) AXS103 - with ARC HS38 in FPGA Both options share exactly the same base-board and only differ with CPU-tiles in use. That means all peripherals are the same (they are implemented in FPGA on the base-board) and so generic board could be used for both. While at it: * Recreated defconfigs with savedefconfig * In include/configs/axs10x.h numerical sizes replaced with defines from linux/sizes.h for better readability. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | arc: Rename ARCangel4 board to nSIMAlexey Brodkin2016-08-05-5/+7
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARCangel was one of the main development boards back in the day but now it's gone and replaced by other boards like ARC SDP. But we also used to have simulation platform very similar to ARCangel4 in terms of CPU settings as well as basic IO like UART. Even though ARCangel4 is long gone now we have a replacement for simulation which is a plain or stand-alone nSIM and Free nSIM. Note Free nSIM is available for download here: https://www.synopsys.com/cgi-bin/dwarcnsim/req1.cgi And while at it: * Finally switch hex numerical values in nsim.h to defines from include/linux/sizes.h * Add defconfigs with ARC HS38 cores * Recreated all defconfigs with savedefconfig Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-08-02-9/+17
|\ \
| * | board/freescale: Update MAINTAINERS filesYork Sun2016-08-02-9/+17
| | | | | | | | | | | | | | | | | | Update maintainers for secure boot targets. Signed-off-by: York Sun <york.sun@nxp.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-08-02-0/+5
|\ \ \
| * | | ARM64: zynqmp: Wire up PSCI resetMichal Simek2016-08-02-0/+5
| |/ / | | | | | | | | | | | | | | | Using PSCI to reset the system. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Drop references to MAKEALL in the documentationSimon Glass2016-07-31-6/+6
|/ / | | | | | | | | | | | | | | It is confusing to mention MAKEALL when it is not the normal way of building U-Boot anymore. Update the documentation to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge git://git.denx.de/u-boot-rockchipTom Rini2016-07-31-10/+97
|\ \
| * | rockchip: add support for rk3288 PopMetal boardjk.kernel@gmail.com2016-07-31-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | PopMetal is a rockchip rk3288 based board made by ChipSpark, which has many interface such as HDMI, VGA, USB, micro-SD card, WiFi, Audio and Gigabit Ethernet. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | rockchip: add basic support for fennec-rk3288 boardjk.kernel@gmail.com2016-07-31-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fennec is a RK3288-based development board with 2 USB ports, HDMI, micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provides access to display pins, I2C, SPI, UART and GPIOs. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | rockchip: rk3288: move evb board to rockchip folderjk.kernel@gmail.com2016-07-31-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | The 'evb-rk3288' is not a vendor name, change it to 'rockchip' which is the real vendor name. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | rk3399: Reserve space for ARM Trust FirmwareKever Yang2016-07-31-1/+2
| | | | | | | | | | | | | | | | | | | | | RK3399 needs reserve 0x200000 at the beginning of DRAM, for ATF bl31. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | rockchip: rk3036: update MAINTAINER fileXu Ziyuan2016-07-31-4/+4
| | | | | | | | | | | | | | | | | | | | | Update MAINTAINER files for kylin_rk3036, evb_rk3036. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | sunxi: On newer SoCs use words 1-3 instead of just word 3 from the SIDHans de Goede2016-07-31-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that bytes 13-14 of the SID / bytes 1-2 from word 3 of the SID are always 0 on H3 making it a poor candidate to use as source for the serialnr / mac-address, and the other non constant words (1 and 2) also have quite a few bits which are the same for some boards, This commits switches to using the crc32 of words 1 - 3 to get a more unique value for the mac-address / serialnr. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: Ensure that the NIC specific bytes of the mac are not all 0Hans de Goede2016-07-31-0/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | On 2 of my H3 boards bytes 13-15 of the SID are all 0 leading to the NIC specific bytes of the mac all being 0, which leads to the boards not getting an ipv6 address from the dhcp server. This commits adds a check to ensure this does not happen. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-07-28-327/+2892
|\ \
| * | mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfigFabio Estevam2016-07-28-0/+1
| | | | | | | | | | | | | | | | | | Add an entry for the mx7dsabresd_secure_defconfig target. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | mx6ul_14x14_evk: Remove unused defineDiego Dorta2016-07-28-3/+0
| | | | | | | | | | | | | | | | | | | | | Remove unused define constant. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | bx50v3: Use imx_ddr_size() for calculating the DDR sizeFabio Estevam2016-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | imx_ddr_size() can be used to calculate the DDR size in runtime. By using this function we no longer need to define PHYS_SDRAM_SIZE. Cc: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | aristainetos: Use imx_ddr_size() for calculating the DDR sizeFabio Estevam2016-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | imx_ddr_size() can be used to calculate the DDR size in runtime. By using this function we no longer need to define PHYS_SDRAM_SIZE. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Heiko Schocher <hs@denx.de>