summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* board/b4qds: VID supportShaveta Leekha2014-05-13-0/+240
| | | | | | | | | | | | | | | | | | The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. B4860QDS has a PowerOne ZM7300 programmable digital Power Manager which is programmed as per the value read from the fuses. Reference for this code is taken from t4qds VID implementation. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
* board/freescale/common: ZM7300 driverShaveta Leekha2014-05-13-0/+258
| | | | | | | | | | | Adds Support for PowerOne ZM7300 voltage regulator. This device is available on some Freescale Boards like B4860QDS and has to be programmed to adjust the voltage on the board. The device is accessible via I2C interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
* nand_spl: remove unused linker scripts u-boot-nand.ldsMasahiro Yamada2014-05-12-558/+0
| | | | | | | | | | | | | | | Commit 345b77ba removed some nand_spl boards but it missed to delete linker scripts. These linker scripts are not used now. And one more fix: amcc/acadia does not support nand_spl anymore, so remove #if !defined(CONFIG_NAND_U_BOOT) ... #endif Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* cosmetic: delete misleading comment /* CONFIG_BOARDDIR */Masahiro Yamada2014-05-12-1/+1
| | | | | | | CONFIG_BOARDDIR is not referenced in these linker scripts. The comment /* CONFIG_BOARDDIR */ is misleading. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* blackfin: replace bfin_gen_rand_mac() with eth_random_addr()Masahiro Yamada2014-05-12-30/+15
| | | | | | | | | | | bfin_gen_rand_mac() uses __DATE__ as the seed for random ethernet address. This makes the build non-deterministic. In the first place, it should not be implemented as a Bfin-specific function. Use eth_random_addr() instead. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sonic Zhang <sonic.zhang@analog.com>
* net: rename and refactor eth_rand_ethaddr() functionMasahiro Yamada2014-05-12-1/+1
| | | | | | | | | | | | | | | | | | | | Some functions in include/net.h are ported from include/linux/etherdevice.h of Linux Kernel. For ex. is_zero_ether_addr() is_multicast_ether_addr() is_broadcast_ether_addr() is_valid_ether_addr(); So, we should use the same function name as that of Linux Kernel, eth_rand_addr(), for consistency. Besides, eth_rand_addr() has been implemented as an inline function. So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* bd_info: remove bi_barudrate member from struct bd_infoMasahiro Yamada2014-05-12-4/+5
| | | | | | | | | | | | | | | | | gd->bd->bi_baudrate is a copy of gd->baudrate. Since baudrate is a common feature for all architectures, keep gd->baudrate only. It is true that bi_baudrate was passed to the kernel in that structure but it was a long time ago. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Michal Simek <monstr@monstr.eu> (For microblaze)
* Merge branch 'tom' of git://git.denx.de/u-boot-x86Tom Rini2014-05-09-181/+0
|\
| * sandbox: move source files from board/ to arch/sandbox/Masahiro Yamada2014-05-09-389/+0
| | | | | | | | | | | | | | | | | | | | | | | | Prior to commit 33a02da0, all boards must have board/${BOARD}/ or board/${VENDOR}/${BOARD}/ directory. Now this rule is obsolete. It looks weird that sandbox defines "vendor" and "board" just for meeting the old U-Boot directory structure. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org>
| * sandbox: Update and expand the READMESimon Glass2014-05-09-7/+215
| | | | | | | | | | | | | | Now that sandbox has a good base of features, the README is quite out of date. Update it, and document the new features. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-23431/+1822
|\ \ | |/ | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * ums: always initialize mmc before ums_disk_init()Mateusz Zalega2014-05-05-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In cases when MMC hadn't been initialized before, ie. by the user or other subsystem, it was still uninitialized while UMS media capacity check, leading to broken ums command. UMS has to initialize resources it uses. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Tested-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * usb: dfu: fix boards wo USB cable detectionMateusz Zalega2014-05-05-20/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Former usb_cable_connected() patch broke compilation of boards which do not support this feature. I've renamed usb_cable_connected() to g_dnl_usb_cable_connected() and added its default implementation to gadget downloader driver code. There's only one driver of this kind and it's unlikely there'll be another, so there's no point in keeping it in /common. Previously this function was declared in usb.h. I've moved it, since it's more appropriate to keep it in g_dnl.h - usb.h seems to be intended for USB host implementation. Existing code, confronted with default -EOPNOTSUPP return value, continues as if the cable was connected. CONFIG_USB_CABLE_CHECK was removed. Change-Id: Ib9198621adee2811b391c64512f14646cefd0369 Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxTom Rini2014-04-25-64/+101
| |\
| | * ppc4xx: add support for new PMC440 revision with cleanupMatthias Fuchs2014-04-24-64/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the new PMC440 hardware revision 1.4. The board now uses Micrel KSZ9031 phys. Add missing i2c initialization before reading bootstrap eeprom. Fix a couple of coding style issues. Make local functions static. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxTom Rini2014-04-25-0/+219
| |\ \
| | * | mpc83xx: add ids8313 supportHeiko Schocher2014-04-23-0/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for the ids8313 board. CPU: e300c3, MPC8313, Rev: 2.1 at 396 MHz, CSB: 132 MHz I2C: ready SPI: ready DRAM: 128 MiB (DDR2, 32-bit, ECC off, 264 MHz) Flash: 8 MiB NAND: 128 MiB Net: TSEC0, TSEC1 [PRIME] public key on NOR flash start Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| | * | powerpc, ids8247: create vendor board dir idsHeiko Schocher2014-04-23-0/+0
| | |/ | | | | | | | | | | | | | | | | | | | | | create vendor board directory ids and move ids8247 board to it. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-04-25-77/+1503
| |\ \ | | |/ | |/|
| | * powerpc/T4QDS: add two stage boot of nand/sdShaohui Xie2014-04-22-3/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND/SD boot loader using SPL framework. PBL initialise the internal SRAM and copy SPL, this further initialise DDR using SPD and environment and copy u-boot from NAND/SD to DDR, finally SPL transfer control to u-boot. NOR uses CS1 instead of CS2 when NAND boot, fix it. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/t4240: updated RCW and PBI for rev2.0Shaohui Xie2014-04-22-17/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updated the RCW for rev2.0 which uses new frequency settings as below: Clock Configuration: CPU0:1666.667 MHz, CPU1:1666.667 MHz, CPU2:1666.667 MHz, CPU3:1666.667 MHz, CPU4:1666.667 MHz, CPU5:1666.667 MHz, CPU6:1666.667 MHz, CPU7:1666.667 MHz, CPU8:1666.667 MHz, CPU9:1666.667 MHz, CPU10:1666.667 MHz, CPU11:1666.667MHz, CCB:733.333 MHz, DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:183.333 MHz FMAN1: 733.333 MHz FMAN2: 733.333 MHz QMAN: 366.667 MHz PME: 533.333 MHz Remove workaround of IFC bus speed and SERDES A-006031 of rev1.0. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t2080rdb: some update for t2080rdbShengzhou Liu2014-04-22-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - update readme. - add CONFIG_SYS_CORTINA_FW_IN_* for loading Cortina PHY CS4315 ucode from NOR/NAND/SPI/SD/REMOTE. - update cpld vbank with SW3[5:7]=000 as default vbank0 instead of previous SW3[5:7]=111 as default vbank. - fix CONFIG_SYS_I2C_EEPROM_ADDR_LEN to 2. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t208xrdb: Add support of 2-stage NAND/SPI/SD bootShengzhou Liu2014-04-22-16/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2-stage NAND/SPI/SD boot loader using SPL framework. PBL initializes the internal CPC-SRAM and copy SPL(160K) to it, SPL further initializes DDR using SPD and environment and copy u-boot(768K) from SPI/SD/NAND to DDR, finally SPL transfers control to u-boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t208xqds: Add support of 2-stage NAND/SPI/SD bootShengzhou Liu2014-04-22-2/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2-stage NAND/SPI/SD boot loader using SPL framework. PBL initializes the internal CPC-SRAM and copy SPL(160K) to it, SPL further initializes DDR using SPD and environment and copy u-boot(768 KB) from SPI/SD/NAND to DDR, finally SPL transfers control to u-boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: fix boards.cfg for T2081QDS_SDCARD and _SPIFLASH] Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/t1040rdb: added a break in switch caseShaohui Xie2014-04-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | There should be a break for case PHY_INTERFACE_MODE_SGMII, otherwise it will fall into case PHY_INTERFACE_MODE_RGMII. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t104xrdb: Add support of NAND, SD, SPI boot for T104xRDBPrabhakar Kushwaha2014-04-22-3/+256
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND, SD, SPI boot loader using SPL framework. here, PBL initialise the internal SRAM and copy SPL(160KB). This further initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND to DDR. Finally SPL transer control to u-boot. Initialise/create followings required for SPL framework - Add spl.c which defines board_init_f, board_init_r - update tlb and ddr accordingly Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/b4qds:Add support of 2 stage NAND boot-loaderPrabhakar Kushwaha2014-04-22-3/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND boot loader using SPL framework. here, PBL initialise the internal SRAM and copy SPL(160KB). This further initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND to DDR. Finally SPL transer control to u-boot. Initialise/create followings required for SPL framework - Add spl.c which defines board_init_f, board_init_r - update tlb and ddr accordingly Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * T1040QDS/U-QE: Add u-qe support to t1040qdsZhao Qiang2014-04-22-0/+27
| | | | | | | | | | | | | | | | | | | | | Add u-qe support for t1040qds Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * mpc85xx: Add deep sleep support on T104xRDBTang Yuantian2014-04-22-0/+10
| | | | | | | | | | | | | | | | | | | | | Add deep sleep support on T104xRDB platforms. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * mpc85xx: Add deep sleep support on T1040QDSTang Yuantian2014-04-22-0/+12
| | | | | | | | | | | | | | | | | | | | | Add deep sleep support on T1040QDS platform. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t104xrdb: Add support of CPLDPrabhakar Kushwaha2014-04-22-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040RDB and T1042RDB_PI has CPLD. Here CPLD controls board mux/features. This support of CPLD includes - files and register defintion - Commands to swtich alternate bank and default bank Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * mpc85xx/T1040QDS_D4: Add DDR4 supportYork Sun2014-04-22-27/+27
| | | | | | | | | | | | | | | | | | | | | T1040QDS_D4 is a variant of T1040QDS, with additional circuit to support DDR4 memory. Tested with MTA9ASF51272AZ-2G1AYESZG. Signed-off-by: York Sun <yorksun@freescale.com>
| | * board/b4860qds:Slow MDC clock to comply IEEE specs in PBI configPrabhakar Kushwaha2014-04-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MDC generate by default value of MDIO_CLK_DIV is too high i.e. higher than 2.5 MHZ. It violates the IEEE specs. So Slow MDC clock to comply IEEE specs Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * PPC 85xx: Add qemu-ppce500 machineAlexander Graf2014-04-22-0/+357
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For KVM we have a special PV machine type called "ppce500". This machine is inspired by the MPC8544DS board, but implements a lot less features than that one. It also provides more PCI slots and is supposed to be enumerated by device tree only. This patch adds support for the generic ppce500 machine and tries to rely solely on device tree for device enumeration. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | MIPS: drop incaip boardDaniel Schwierzeck2014-04-20-1134/+0
| |/ | | | | | | | | | | | | | | | | This is dead hardware and no one is interested in making the necessary changes for upcoming features like generic board or driver model. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wolfgang Denk <wd@denx.de>
| * arm: remove lubbock board supportMasahiro Yamada2014-04-18-501/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/lubbock/* - Remove include/configs/lubbock.h - Cleanup defined(CONFIG_LUBBOCK) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove MOUSSE board supportMasahiro Yamada2014-04-18-2559/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/mousse/* - Remove include/configs/MOUSSE.h - Clean-up defined(CONFIG_MOUSSE) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove rsdproto board supportMasahiro Yamada2014-04-18-909/+0
| | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/rsdproto/* - Remove include/configs/rsdproto.h - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove RPXsuper board supportMasahiro Yamada2014-04-18-875/+0
| | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/rpxsuper/* - Remove include/configs/RPXsuper.h - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove RPXClassic, RPXlite boards supportMasahiro Yamada2014-04-18-3164/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/RPXlite/* - Remove board/RPXClassic/* - Remove include/configs/RPXlite.h - Remove include/configs/RPXClassic.h - Clean-up defined(CONFIG_RPXCLASSIC) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove ADS860, FADS823, FADS850SAR, FADS860T supportMasahiro Yamada2014-04-18-87/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since these boards were moved to Orphan. Remove. - Remove include/configs/{ADS860.h,FADS823.h,FADS850SAR.h,FADS860T.h} - Cleanup defined(CONFIG_ADS), defined(CONFIG_MPC823FADS), defined(CONFIG_MPC850SAR), defined(CONFIG_SYS_DAUGHTERBOARD) - Remove the entries from boards.cfg Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove genietv board supportMasahiro Yamada2014-04-18-1045/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/genietv/* - Remove include/configs/GENIETV.h - Clean-up if defined(CONFIG_GENIETV) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove MBX and MBX860T boards supportMasahiro Yamada2014-04-18-1652/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/mbx8xx/* - Remove include/configs/{MBX.h,MBX860T.h} - Clean-up if defined(CONFIG_MBX) - Move the entries from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove NX823 board supportMasahiro Yamada2014-04-18-1034/+0
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/nx823/* - Remove include/configs/NX823.h - Clean-up ifdef(CONFIG_NX823) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * kbuild: do not use $(BOARD) to specify exact object nameMasahiro Yamada2014-04-17-2/+2
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * board: hidden_dragon: remove an unused source fileMasahiro Yamada2014-04-17-137/+0
| | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Yusdi Santoso <yusdi_santoso@adaptec.com>
| * board: dave: delete unused source filesMasahiro Yamada2014-04-17-2703/+0
| | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Andrea Marson <andrea.marson@dave-tech.it>
| * board: prodrive: delete unused source filesMasahiro Yamada2014-04-17-711/+0
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
| * board: Marvell: delete an unused source fileMasahiro Yamada2014-04-17-115/+0
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Lei Wen <leiwen@marvell.com>
| * board: sandpoint: delete an unused source fileMasahiro Yamada2014-04-17-137/+0
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Jim Thompson <jim@musenki.com>
generated by cgit v1.1 at 2024-11-02 03:12:19 +0000