summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCPatrick Bruenn2016-12-16-0/+525
| | | | | | | | | | | | | | | | Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
* imx: mx6sllevk: add plugin supportPeng Fan2016-12-16-0/+161
| | | | | | | Add plugin support for mx6sllevk board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* arm: imx: add i.MX6SLL EVK board supportPeng Fan2016-12-16-0/+270
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6SLL EVK board support. 1. Add imx6sll-evk device tree. 2. Enable SDHC/I2C/UART. 3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver. Boot Log: U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800) CPU: Freescale i.MX6SLL rev1.0 at 792MHz CPU: Commercial temperature grade (0C to 95C)Reset cause: POR Model: Freescale i.MX6SLL EVK Board Board: MX6SLL EVK DRAM: 2 GiB i2c bus 0 at 35258368, no gpio pinctrl state. PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: clock: gate clk before changing pix clk muxPeng Fan2016-12-16-2/+2
| | | | | | | | | | | The LCDIF Pixel clock mux is not glitchless, so need to gate before changing mux. Also change enable_lcdif_clock prototype with a new input parameter to indicate disable or enable. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* board/liteboard: Add support for liteBoardMarcin Niestroj2016-12-16-0/+342
| | | | | | | | | | | | liteBoard is a development board which uses liteSOM as its base. Hardware specification: * liteSOM (i.MX6UL, DRAM, eMMC) * Ethernet PHY (id 0) * USB host (usb_otg1) * MicroSD slot (uSDHC1) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* udoo_neo: Add Ethernet supportBreno Lima2016-12-16-0/+95
| | | | | | | | UDOO Neo boards has one FEC port connected to KSZ8091, add support for it. Tested on a UDOO Neo Full with "dhcp zImage" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add PFUZE300 PMIC supportBreno Lima2016-12-16-0/+143
| | | | | | | | UDOO Neo boards has a PFUZE300 connected to I2C1 bus. Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Staticize board_string()Breno Lima2016-12-16-1/+1
| | | | | | | Change board_string() function to static because it's being used locally. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove USDHC3 supportBreno Lima2016-12-16-88/+6
| | | | | | | | It's not necessary to support USDHC3 in U-Boot as it's being used for the WLAN. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* arm: imx: initial support for colibri imx6Max Krummenacher2016-12-16-0/+2037
| | | | | | | | This adds board support for the Toradex module family Colibri iMX6. The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both with a version for commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* arm: imx: initial support for apalis imx6Max Krummenacher2016-12-16-0/+2203
| | | | | | | | This adds board support for the Toradex module family Apalis iMX6. The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* colibri_vf: use same NAND clock as Linux usesStefan Agner2016-12-16-1/+1
| | | | | | | | | | | | | | | | Currently a divider of 6 has been used, leading to following NAND Flash Controller (NFC) clocks: VF61: 27.7 MHz (166.7MHz bus clock) VF50: 22 MHz (132MHz bus clock) The NAND Flash Memory used on VF50 allows to use clock speed of up to 33MHz, while the Flash Memory of VF61 allows 50MHz. We can use the same divider of 4 on both modules to configure the maximal possible clock speeds: VF61: 41.7 MHz VF50: 33 MHz Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* colibri_vf: cleanup USB clock initializationStefan Agner2016-12-16-4/+10
| | | | | | | | | Use the same preprocessor define to enable clocks as we use to enable the driver. Make sure that the necessary PLL's are on (they get enabled by boot ROM by default, so this is more for completness). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* colibri_vf: use device-tree for MTD partitionsStefan Agner2016-12-16-0/+13
| | | | | | | | Use device-tree fixup to communicate the MTD partitions to the kernel. U-Boot's mtdparts environment variable will be used as partition source for the device-tree based partition table too. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* toradex: allow custom fdt board setup in board fileStefan Agner2016-12-16-5/+53
| | | | | | | | | | The config block support currently uses the ft_board_setup function to patch the device tree with config block information. However, this does not allow to patch the device tree with board specific information. Rename the common setup function to ft_common_board_setup and use the call it from the board files directly. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* toradex: fix USB Download gadget fixup callbackStefan Agner2016-12-16-2/+2
| | | | | | | Use the proper config option to guard the USB Download Function fixup callback. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* imgtec: Update MAINTAINERS for more config filesTom Rini2016-12-09-1/+6
| | | | | | Cover all of the boston and malta variations. Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evmJyri Sarha2016-12-09-0/+28
| | | | | | | | | | | | | | Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With the default values LCDC suffers from DMA FIFO underflows and frame synchronization lost errors. The initialization values are the highest that work flawlessly when heavy memory load is generated by CPU. 32bpp colors were used in the test. On BBB the video mode used 110MHz pixel clock. The mode supported by the panel of am335x-evm uses 30MHz pixel clock. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* calimain: Update maintainers and their email addressesChristian Riesch2016-12-09-2/+2
| | | | | | Signed-off-by: Christian Riesch <christian@riesch.at> Cc: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Cc: Christoph Rüdisser <christoph.ruedisser@omicronenergy.com>
* am57xx: Set tps659038 PMIC GPIO7 pad mux value to POWERHOLDKeerthy2016-12-09-0/+16
| | | | | | | | | | The GPIO7 pad mux should be programmed to POWERHOLD value as per board design. In cases where the PMIC is shut off the mux is set to GPIO7 mode. So during initialization to be on the safer side set the mode to POWERHOLD. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini2016-12-09-54066/+216
| | | | | This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
* Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-12-09-216/+54066
|\
| * ARM64: zynqmp: Add updated psu_init_gpl* filesMichal Simek2016-12-08-0/+53957
| | | | | | | | | | | | With origin files there was an issue with serdes setting for SCSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * zynqmp worksMichal Simek2016-12-08-130/+82
| |
| * ARM: zynq: Replace dram_init* functions with board_init_f safe onesNathan Rossi2016-12-08-98/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dram_init* functions for the zynq board are not safe for use from the board_init_f stage due to its use of the 'tmp' static variable. This incorrect use of a static variable was causing rare issues where the dram_init function would overwrite some parts the __rel_dyn section which caused obscure failures. Using the zynq_zybo configuration, U-Boot would generate the following error during image load. This was caused due to dram_init overwriting the relocations for the "image" variable within the do_bootm function. Out of coincidence the un-initialized memory has a compression type which is the same as the value for the relocation type R_ARM_RELATIVE. Uncompressing Invalid Image ... Unimplemented compression type 23 It should be noted that this is just one way the issue could surface, other cases my not be observed in normal boot flow. This change removes the existing code and copies the implementation of the dram_init and dram_init_banksize from the arch/arm/mach-uniphier/dram_init.c source. This version of these functions does not use static variables and behaves the same (reading banks from fdt, and using the first bank as the ram_size). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Fixes: 758f29d0f8 ("ARM: zynq: Support systems with more memory banks") Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * block: Move ceva driver to DMMichal Simek2016-12-08-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch also includes ARM64 zynqmp changes: - Remove platform non DM initialization - Remove hardcoded sata base address Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Series-to: sjg, agraf@suse.de Series-cc: uboot Series-version: 4 Series-changes: 2 - make ceva_init_sata static - Move SATA_CEVA to defconfig - Initalized max_lun and max_id platdata Series-changes: 3 - Extend Kconfig help description - sort dm.h - Remove SPL undefinition from board file - Fix Kconfig dependecies
* | MAINTAINERS: socfpga: update email address for Dinh NguyenDinh Nguyen2016-12-06-3/+3
| | | | | | | | | | | | | | With the acquisition of Altera by Intel, my Altera email may be going away soon. Update the contact to a more reliable address. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | socfpga: add support for Terasic DE1-SoC boardAnatolij Gustschin2016-12-06-0/+1347
|/ | | | | | | | Add CycloneV based Terasic DE1-SoC board. The board boots from SD/MMC. Ethernet and USB host is supported. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marex@denx.de>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-12-05-2/+4
|\
| * fsl/ddr: Add erratum_a009942_check_cpo and clean related erratumShengzhou Liu2016-12-05-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | - add additional function erratum_a009942_check_cpo to check if the board needs tuning CPO calibration for optimal setting. - move ERRATUM_A009942(with revision to check cpo_sample option) from fsl_ddr_gen4.c to ctrl_regs.c for reuse on all DDR4/DDR3 parts. - move ERRATUM_A008378 from fsl_ddr_gen4.c to ctrl_regs.c - remove obsolete ERRATUM_A004934 which is replaced with ERRATUM_A009942. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> [YS: Replaced CONFIG_QEMU_E500 with CONFIG_ARCH_QEMU_E500] Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: baltos: active mPCIe slotYegor Yefremov2016-12-05-0/+18
| | | | | | | | | | | | | | | | | | Baltos devices provide a mPCIe slot, whose power is turned off by default. This patch activates mPCIe slot in U-Boot, so that for example GSM modem can be already available in user space. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: baltos: remove TI board leftoverYegor Yefremov2016-12-05-125/+0
| | | | | | | | | | | | | | Remove unneeded pinmux configurations and TI EEPROM struct. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: DRA7: AMxx: Make sure that the SPL always reads the configuration EEPROMJean-Jacques Hiblot2016-12-05-4/+6
| | | | | | | | | | | | | | | | | | The bootrom may corrupt the area of SRAM used to store the ti_common_eeprom structure. This patch makes sure that it's always read after a reset, even if a valid MAGIC number is found in the SRAM. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge git://www.denx.de/git/u-boot-i2cTom Rini2016-12-05-13/+58
|\ \ | |/ |/|
| * arm: samsung: Convert s5p_goni and smdkc100 to DM_I2CSimon Glass2016-12-05-1/+6
| | | | | | | | | | | | | | | | These are the last two samsung boards that don't use DM_I2C. Move them over, leaving #ifdefs to allow the maintainer to complete this work. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
| * arm: exynos: i2c: Convert exynos boards to use DM_I2CSimon Glass2016-12-05-12/+52
| | | | | | | | | | | | | | | | | | | | Three boards are still not converting to use DM_I2C. They are also using the old PMIC framework. Rather than removing them, add #ifdefs to allow them to continue to build. This will give the maintainers a little more time to decide whether to convert them or not. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* | arm64: mvebu: Add support for the DB-88F8040 Armada 8k devel boardStefan Roese2016-12-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the necessary files to support the Marvell Armada 8k devel board. Most board specfic files are shared with the Armada 7k boards under the name "armada-8k*". So only minimal changes are necessary to add this basic board support (except the DT files of course). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* | arm64: mvebu: armada-8k: Only configure xHCI power on DB-88F7040 boardStefan Roese2016-12-05-68/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses of_machine_is_compatible() to detect the board at runtime and only configured the I2C IO expander for the xHCI power / reset on the DB-88F7040 board. As this code will be used by other Armada-7k/8k ports, its necessary to use this runtime detection here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* | arm64: mvebu: Rename db-88f7040 files to armada-8kStefan Roese2016-12-05-6/+6
|/ | | | | | | | | | | | | | | | | This moves some of the Armada DB-88F7040 board specific files to a more generic name: armada-8k. This is in preparation for the Armada-8k support which will be added soon. And since both platforms share most devices, lets also share most source files to not duplicate the code here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-12-04-1/+1
|\
| * powerpc: cyrus: Separate P5020/P5040 config optionsYork Sun2016-12-02-1/+1
| | | | | | | | | | | | | | Instead of using EXTRA options in defconfig, use two targets in Kconfig to select correct SoC. Signed-off-by: York Sun <york.sun@nxp.com>
* | davinci: da8xxevm: fix indentationAndre Przywara2016-12-04-2/+2
| | | | | | | | | | | | | | | | | | | | | | Apparently the indentation is wrong in this case, as the second message should be printed indepdently of the if statement. Fix this indentation to avoid both compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* | arm: Remove VCMA9 boardSimon Glass2016-12-04-911/+0
| | | | | | | | | | | | | | | | | | This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | arm: Remove smdk2410 boardSimon Glass2016-12-04-315/+0
| | | | | | | | | | | | | | | | This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch>
* | ARM: dts: AM571x-IDK Initial SupportSchuyler Patton2016-12-04-0/+2
| | | | | | | | | | | | | | | | | | Add initial DTS support for AM571-IDK evm. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Add support for the am571x idkSteve Kipisz2016-12-04-3/+284
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AM571x Industrial Development Kit (IDK) is a board based on TI's AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This board is a development platform for the Industrial Market with: - 1GB of DDR3L - Dual 1Gbps Ethernet - HDMI - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The PRU/ICSS will be supported by 3rd party software for EtherCat, Profibus, and other Industrial protocols. The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5718 Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am572x-idk: Update pinmux using latest PMTLokesh Vutla2016-12-04-215/+221
| | | | | | | | | | | | | | | | | | | | | | | | | | Update the board pinmux for AM572x-IDK board using latest PMT[1] and the board files named am572x_idk_v1p3b_sr2p0 that were autogenerated on 20th October, 2016 by "Steve Kipisz <s-kipisz2@ti.com>" and "Tom Johnson <thjohnson@ti.com>". [1] https://dev.ti.com/pinmux/app.html#/default/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am572x: Add pinmux for X15/GPEVM SR2.0 using latest PMTNishanth Menon2016-12-04-137/+260
| | | | | | | | | | | | | | | | | | | | | | | | Update the board pinmux for AM572x-IDK board using latest PMT[1] and the board files named am572x_gp_evm_A3a_sr2p0 that were autogenerated on 19th October, 2016 by "Ahmad Rashed<a-rashed@ti.com>". [1] https://dev.ti.com/pinmux/app.html#/default/ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Update SR1.1 RGMII0 iodelay timings for x15/GPEVMNishanth Menon2016-12-04-5/+5
| | | | | | | | | | | | | | | | | | | | Update the timing for RGMII0 interface based on PCT_DRA75x_DRA74x_SR1.1_v1.3.10 version (Jan 2016). This update is for SR1.1 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Add support for detection of X15 revb1Lokesh Vutla2016-12-04-7/+19
| | | | | | | | | | | | | | | | | | | | BeagleBoard-X15 Rev B1 with SR1.1 platform have incompatible changes for HDMI GPIO requiring new dtb support. This implies we have to properly identify the platform now as well. Hence provide a different board name for the Rev B1 variants. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-11-14 22:30:42 +0000