summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* arm: socfpga: Add support for the Terasic DE-0 Atlas boardDinh Nguyen2015-09-04-0/+1391
| | | | | | | Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Add support for DENX MCV SoM and MCVEVK boardMarek Vasut2015-09-04-0/+1364
| | | | | | | | Add support for DENX MCV SoM, which is CycloneV based and the associated DENX MCVEVK baseboard. The board can boot from eMMC. Ethernet and USB is supported. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Add support for Terasic SoCkit boardMarek Vasut2015-09-04-0/+1404
| | | | | | | | Add support for Terasic SoCkit, which is CycloneV based board. The board can boot either from SD/MMC or QSPI. Ethernet is also supported. Signed-off-by: Marek Vasut <marex@denx.de>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2015-09-03-1/+71
|\
| * rockchip: Add basic support for jerrySimon Glass2015-09-02-1/+36
| | | | | | | | | | | | This builds and displays an SPL message, but does not function beyond that. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add basic support for firefly-rk3288Simon Glass2015-09-02-0/+35
| | | | | | | | | | | | | | | | | | | | | | The Firefly RK3288 is a suitable target board for initial mainline Rockchip support. It includes a good set of peripherals, a recent SoC and it is readily available. This adds only some basic files required to allow the baord to display a serial message in SPL and hang. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert omap3_logic to ti_omap3_common.hAdam Ford2015-09-02-0/+14
| | | | | | | | | | | | | | Convert to using the common config files. Signed-off-by: Adam Ford <adam.ford@logicpd.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | powerpc: mpc85xx: remove stxgp3, stxssa supportMasahiro Yamada2015-09-02-1643/+0
| | | | | | | | | | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Dan Malek <dan@embeddedalley.com>
* | powerpc: mpc5xx: remove cmi_mpc5xx supportMasahiro Yamada2015-09-02-665/+0
| | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | powerpc: ppc4xx: remove zeus supportMasahiro Yamada2015-09-02-595/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove sbc405 supportMasahiro Yamada2015-09-02-888/+0
| | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | powerpc: ppc4xx: remove pcs440ep supportMasahiro Yamada2015-09-02-1465/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove p3p440 supportMasahiro Yamada2015-09-02-282/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove lwmon5 supportMasahiro Yamada2015-09-02-1413/+0
| | | | | | | | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Remove CONFIG_LWMON5 references. (Also, remove undefined CONFIG_WD_MAX_RATE while I am here.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove csb272, csb472 supportMasahiro Yamada2015-09-02-745/+0
| | | | | | | | | | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
* | powerpc: ppc4xx: remove alpr supportMasahiro Yamada2015-09-02-674/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-09-02-5/+5
|\ \
| * | powerpc/t1023rdb: change default core frequency to 1200MHzShengzhou Liu2015-09-01-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Per new requirement, change default core frequency from previous 1400MHz to 1200MHz to save power. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | powerpc/defconfig: Rename defconfig file for T1040QDS/T1024QDS DDR4 targetsYork Sun2015-09-01-3/+3
| |/ | | | | | | | | | | | | Previously the DDR4 targets were named with _D4. Rename them with _DDR4 for easy identification. Signed-off-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-09-02-273/+1215
|\ \
| * | arm: mx6: cm-fx6: print PCB revisionNikita Kiryanov2015-09-02-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Print board revision for cm-fx6. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | arm: mx6: cm-fx6: force host mode on usb controllerNikita Kiryanov2015-09-02-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some CM-FX6 modules U-Boot attempts to configure the usb0 controller in device mode, which renders it unavailable: USB0: Port not available. and also causes usb stop to report an error EHCI failed to shut down host controller. This happens mostly on MX6 Dual based modules, and is caused by the USBPHY_CTRL register reporting USBPHY_CTRL_OTG_ID to be 1, even when it is pulled down. Since we do not support device mode in cm-fx6 u-boot, force all controllers to be configured as hosts. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | arm, imx6: add aristainetos 2b board versionHeiko Schocher2015-09-02-8/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | there is a 2b board version of the aristainetos2 board. Differences to the v2: - spi cs for the nor flash and display controller changed - some pinmux changes - LED gpio settings changed Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6slevk: add SPL supportPeng Fan2015-09-02-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPL boot support for mx6slevk board. 1. Introduce a configuration file mx6slevk_spl_defconfig. 2. i.MX6SL has same DRAM space with i.MX6SX, need to change SPL DRAM SPACE. 3. Include imx6_spl.h and related SPL macro in mx6slevk.h. 4. select SUPPORT_SPL for TARGET_MX6SLEVK. 5. Add SPL board code to do related initialization. Boot Log: U-Boot SPL 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59 +0000) CPU: Freescale i.MX6SL rev1.2 996 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: mx6: ddr init MMDC according to ddr_typePeng Fan2015-09-02-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefan Roese <sr@denx.de>
| * | tbs2910: remove SYS_SOC from board specific KconfigSoeren Moch2015-09-02-3/+0
| | | | | | | | | | | | | | | | | | | | | SYS_SOC is already defined in arch/arm/cpu/armv7/mx6/Kconfig, no need to define it again Signed-off-by: Soeren Moch <smoch@web.de>
| * | tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONSSoeren Moch2015-09-02-0/+6
| | | | | | | | | | | | | | | | | | move options from CONFIG_SYS_EXTRA_OPTIONS to board specific Kconfig Signed-off-by: Soeren Moch <smoch@web.de>
| * | arm, imx6: aristainetos board updatesHeiko Schocher2015-09-02-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | some small updates for the aristainetos boards: - fix display timings for the aristainetos board - fix pinmux for the aristainetos board - fix pinmux for the aristainetos2 board - fix default environment Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6ul_14x14_evk add ENET supportPeng Fan2015-09-02-0/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add enet support for mx6ul_14x14_evk board: 1. add pinmux settings 2. implement board_eth_init 3. implement board_phy_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: clock support enet2 anatop clock supportPeng Fan2015-09-02-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Heiko Schocher <hs@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
| * | ARM: ts4800: add ethernet supportDamien Riegel2015-09-02-0/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds ethernet support to the TS4800. Note that the MAC address is not fused on this board and have to be read from FEC PALR PAUR registers (this is how the kernel provided by Technologic Systems does it). signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
| * | ARM: ts4800: add basic board supportLucile Quirion2015-09-02-0/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console, TS4800 watchdog The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second stage bootloader. Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
| * | nitrogen6x: change maintainerEric Nelson2015-09-02-1/+1
| | | | | | | | | | | | | | | | | | | | | Troy Kisky will be maintaining the Nitrogen6x board going forward. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | cgtqmx6eval: Add Ethernet supportOtavio Salvador2015-09-02-0/+207
| | | | | | | | | | | | | | | | | | | | | | | | | | | cgtqmx6eval can be populated with a AR8035 or KSZ9031 depending on the board revision. Add Ethernet support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * | arm: mx6: Remove SPI support from WRU-IV baseboardStefan Roese2015-09-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the SPI support from the WRU-IV baseboard as its not used at all. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * | udoo: Switch to SPL supportvpeter42015-09-02-245/+328
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | arm/ls102xa:add hwconfig setting to support disable unused devicesZhuoyu Zhang2015-09-01-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | DEVDISRn registers provides a mechanism for gating clocks of IP blocks that are not used. Here we implement hwconfig option to allow users to disable unused peripherals on the board. For ex. If eSDHC/qDMA/eDMA are unused and with disabled status in dts, User can enable CONFIG_FSL_DEVICE_DISABLE and set "devdis:esdhc,qdma,edma" in hwconfig, thus ESDHC controller & eDMA/qDMA will be clock gated to save more power. Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085a_emu: Drop DDR3 emulation targetYork Sun2015-09-01-1/+0
| | | | | | | | | | | | | | | | The emulator with DDR3 model was used during model bringup. DDR4 controllers are used with ls2085a. Drop the DDR4 target defconfig and enable DDR4 in ls2085a_emu_defconfig. Signed-off-by: York Sun <yorksun@freescale.com>
* | ls102xa: etsec: Use proper settings for BE BDsClaudiu Manoil2015-09-01-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the DMACTRL[LE] hack with recommended settings for ETSECDMAMCR to get the same end effect - obtaining big-endian buffer descriptors and frame data for eTSEC. The reset / default value for ETSECDMAMCR is preserved, excepting the BD and FR bits which are cleared to enable the BE mode in accordance with the H/W specifications. Fixes: 52d00a8 "ls102xa: etsec: Add etsec support for LS102xA" Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Tested-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8: ls2085qds: Add support of X-QSGMII-16PORT riser cardPrabhakar Kushwaha2015-09-01-11/+536
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes interfaces implemented in PCIe form factor board. It supports followings - Card can operate with up to 4 QSGMII lane simultaneously - Card can operate with up to 8 SGMII lane simultaneously Add support of X-QSGMII-16PORT riser card. This patch also take care of back-ward compatiblity with old SGMII rise cards used on LS2085QDS Platform. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085aqds: enable 32KHz rtc outputPriyanka Jain2015-09-01-0/+2
|/ | | | | Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-08-31-11/+34
|\
| * sunxi: Fix MAINTAINERS board sortingHans de Goede2015-08-31-1/+1
| | | | | | | | | | | | | | | | The boards are sorted by SoC, move the Mele_A1000G_quad entry to the list of sun6i boards where it belongs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add support for the Olimex A20 EVBMarcus Cooper2015-08-31-0/+5
| | | | | | | | | | | | Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add inet98v_rev2 defconfig and dts fileHans de Goede2015-08-31-0/+1
| | | | | | | | | | | | | | | | | | | | | | The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add inet97fv2_defconfigHans de Goede2015-08-31-0/+1
| | | | | | | | | | | | | | | | | | | | | | The inet97fv2 is a board found in the first generation of cheap allwinner A10 based 7" tablets. Note that this patch does not add a dts file as we already have one from our dts syncs with the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXIHans de Goede2015-08-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We eventually want to add full nand support, since it makes no sense to build SPL with nand support and u-boot without, or the other way around, a single option will suffice. Renaming the Kconfig option now makes things easier when we add full nand support in the future. The "obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o" is moved to an "ifdef CONFIG_SPL_BUILD" block in the Makefile. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Add support for sun4i and sun5i SoCsHans de Goede2015-08-31-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | Other then having a few less chip-select lines the nand controller on sun4i, sun5i and sun7i is identical. Note this patch also muxes GPC7 to the NAND on sun7i where as before it was not muxed this way. GPC7 is a standard NAND pin, so it should always be muxed to the NAND when in use. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Make sure the DMA controller is enabledHans de Goede2015-08-31-0/+6
| | | | | | | | | | | | | | | | We use DMA for nand data transfers in the SPL, so make sure the DMA controller is enabled. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessaryHans de Goede2015-08-31-5/+7
| | | | | | | | | | | | | | | | Use SYS_NAND_SELF_INIT and only setup the pinmux and clocks when we are actually using the nand. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-11-10 04:03:48 +0000