summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-01-26-14/+44
|\
| * ARM: atmel: sama5d4_xplained: add option for usb ethernet gadgetBo Shen2015-01-19-0/+11
| | | | | | | | | | | | | | Add the option for USB Ethernet gadget based on atmel usb device. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * ARM: atmel: sama5d4ek: add option for usb ethernet gadgetBo Shen2015-01-19-0/+11
| | | | | | | | | | | | | | Add the option for USB Ethernet gadget based on atmel usb device. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * arm, at91: corvus board updatesHeiko Schocher2015-01-19-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - corvus board fix problems with toshiba nand chips on the corvus board problems with toshiba chips Manufacturer ID: 0x98 Chip ID: 0xdc encounterd. Solve this in the following way: - set other nand timings - enable CONFIG_SYS_NAND_READY_PIN - correct the MACH_TYPE setting Signed-off-by: Heiko Schocher <hs@denx.de>
| * taurus, spl: erase also spi flash if recovery button is pressedHeiko Schocher2015-01-19-9/+15
| | | | | | | | | | | | | | if in SPL mode recovery button is pressed, erase also spi flash from offset 0 to CONFIG_SYS_NAND_U_BOOT_SIZE on the taurus board. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-01-26-2/+12
|\ \
| * | ARM: zynq: provide config option to select emioSiva Durga Prasad Paladugu2015-01-26-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Dont send always emio value as zero for zynq_gem_initialize send it based on config. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: Show board information by defaultMichal Simek2015-01-26-0/+8
| | | | | | | | | | | | | | | | | | Show board information in bootlog and enable it by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-marvellTom Rini2015-01-25-13/+13
|\ \ \
| * | | cosmetic: kirkwood: style fixes in kwbimage.cfg filesLuka Perkov2015-01-25-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When diffing through the changes only the relevant changes should be displayed. Signed-off-by: Luka Perkov <luka@openwrt.org> Acked-by: Stefan Roese <sr@denx.de>
* | | | fsl/ls1021qds: Add deep sleep supporttang yuantian2015-01-24-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add deep sleep support on Freescale LS1021QDS platform. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> [York Sun: Fix conflict in fdt.c] Reviewed-by: York Sun <yorksun@freescale.com>
* | | | arm: ls102xa: Add LPUART support for LS1021ATWR boardAlison Wang2015-01-23-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds LPUART support for LS1021ATWR board. For ls1021atwr_nor_lpuart_defconfig, LPUART is used as the console. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | arm: ls102xa: Add LPUART support for LS1021AQDS boardAlison Wang2015-01-23-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds LPUART support for LS1021AQDS board. For ls1021aqds_nor_lpuart_defconfig, LPUART is used as the console. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | arm: ls102xa: Update snoop settings for CCI-400Alison Wang2015-01-23-17/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAAM is connected to CCI-400 S0 slave interface. Disable snooping for S0 will cause CAAM self test failure. This patch is to enable snooping for S0 slave interface. These CCI-400 operations are moved to board_early_init_f() to be initialized earlier. For S4 slave interface, issuing of snoop requests and DVM message requests are enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | ls102xa: dcu: Add platform support for DCU on LS1021AQDS boardXiubo Li2015-01-23-0/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the CH7301 HDMI options and the common configuration for DCU on LS1021AQDS board. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Cc: Jason Jin <Jason.Jin@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as defaultAlison Wang2015-01-23-1/+34
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts to use ge0_clk125 for eTSEC clock muxing. For SAI and CAN which are pin multiplexed with RGMII1 in EC1 of RCW, ge2_clk125 will be used via hwconfig. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200Masahiro Yamada2015-01-23-3183/+0
| | | | | | | | | | | | | | | | | | | | | | | | These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* | | powerpc: mpc5xxx: PM520 board supportMasahiro Yamada2015-01-23-968/+0
| | | | | | | | | | | | | | | | | | | | | This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Josef Wagner <Wagner@Microsys.de>
* | | powerpc: mpc5xxx: remove Total5200 board supportMasahiro Yamada2015-01-23-512/+0
| | | | | | | | | | | | | | | | | | This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boardsMasahiro Yamada2015-01-23-597/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards are still non-generic boards. It is a good thing that we can drop board-specific hack code from drivers/mtd/nand/nand_base.c Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Cc: Andrea "llandre" Marson <andrea.marson@dave-tech.it>
* | | powerpc: mpc85xx: remove P2020DS board supportMasahiro Yamada2015-01-23-536/+0
| | | | | | | | | | | | | | | | | | This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | powerpc: mpc85xx: remove P2020COME board supportMasahiro Yamada2015-01-23-439/+0
| | | | | | | | | | | | | | | | | | | | | This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Ira W. Snyder <iws@ovro.caltech.edu>
* | | powerpc: mpc85xx: remove P1_P2_RDB boardsMasahiro Yamada2015-01-23-1108/+0
| | | | | | | | | | | | | | | | | | | | | | | | These boards are still non-generic boards: P1011RDB, P1022RDB, P2010RDB, P2020RDB Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
* | | powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS supportMasahiro Yamada2015-01-23-1259/+1
| | | | | | | | | | | | | | | | | | | | | | | | These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Dave Liu <daveliu@freescale.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-01-23-484/+123
|\ \ \
| * | | sunxi: Add Hyundai A7HD supportHans de Goede2015-01-23-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Hyundai A7HD is a 7" 16:9 A10 powered tablet featuring 1G RAM, 8G nand, 1024x600 IPS screen, a mini hdmi port, mini usb receptacle and a headphones port for details see: http://linux-sunxi.org/Hyundai_A7HD Cc: Mark Janssen <maniac@maniac.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: video: Make pwm polarity configurableHans de Goede2015-01-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that there are some panels where the pwm input is not active low, so make it configurable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Add support for Mele M5.Ian Campbell2015-01-23-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HDMI, SATA, USB and Ethernet appear functional, I've not done extensive tests of all peripherals though. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: Convert sun7i boards to use auto dram configurationHans de Goede2015-01-23-197/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we've separate detailed dram settings for all sun7i boards, this moves them over to using auto dram configuration so that we can get rid of all the per board dram_foo.c files. This has been tested on a A20-Olinuxino-Lime, A20-Olinuxino_MICRO, Bananapi, Bananapro, Cubieboard2, Cubietruck, Mele_M3 and a Linksprite_pcDuino3. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Drop qt840a_defconfigHans de Goede2015-01-23-38/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qt840a is one of the many tv-boxes using the "i12" A20 pcb, but it populates only one of the 2 places for a 16 bit dram ic, thus reducing the buswidth to 16 bits, and the amount of ram to 512M, which is why we had a separate config for it. This commit switches the generic i12-tvbox_defconfig over to DRAM autoconfiguration, so that it will work with the qt840a too, and drops the qt840a specific config, like we've done with other memory-amount specific configs before. Tested on a generic i12-tvbox with 32 bit bus-width / 1G RAM, and on a qt840a with 16 bit bus-width / 512M RAM. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Add new Chuwi V7 CW0825 board / defconfigHans de Goede2015-01-23-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Chuwi V7 is an A10 (sun4i) based tablet with 1G of RAM, 16G of nand flash, microsd slot, 7" 1024x768 lvds ips panel, mini hdmi out, headphones out, stereo speakers, front & back camera and usb wifi. It is clearly marked "CHUWI", "V7" and "Model: CW0825" on the back of the tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: video: Add support for Hitachi tx18d42vm LVDS LCD panelsHans de Goede2015-01-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Hookup OTG USB controller supportHans de Goede2015-01-22-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hookup OTG USB controller support and enable the otg controller + USB-keyb on various tablets. This allows tablet owners to interact with u-boot without needing to solder a serial console onto their tablet PCB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Add Gemei G9 (Allwinner A10/sun4i) tabletPriit Laes2015-01-22-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gemei G9 is an A10 based tablet, with 1G RAM, 16G NAND, 1024x768 IPS LCD display, stereo speakers, 1.3MP front camera and 5 MP rear camera, 8000mAh battery, GT901 2+1 touchscreen, Bosch BMA250 accelerometer and RTL8188CUS USB wifi. It also has MicroSD slot, miniHDMI, 1 x MicroUSB OTG port and 1 x MicroUSB host port and 3.5mm headphone jack. More details are available at: http://linux-sunxi.org/Gemei_G9 Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: Add Marsboard A10 supportAleksei Mamlin2015-01-22-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for Marsboard A10 board. The Marsboard A10 is a A10 based development board with 1G RAM, 1G NAND, micro SD card slot, SATA 2.0 socket, 10/100 ethernet, mini HDMI port, 1 USB OTG port and 2 USB 2.0 ports. Board does not use the AXP209 pmic, it does not have a pmic at all. Board also have 2 expansion 70 pin headers. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | video: sunxi: Hook up SSD2828 with the sunxi video driverSiarhei Siamashka2015-01-22-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert GPIO names from Kconfig strings into pin numbers for the 'ssd2828_config' struct. Add SSD2828 initialization between enabling the parallel LCD interface and turning on the backlight. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: axp221: Add ELDO[1-3] supportSiarhei Siamashka2015-01-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And also add Kconfig option for selecting ELDO3 voltage. The reason for having this option is that the Android kernel sets ELDO3 to 1.2V when powering up LCD in the case if 'lcd_if' configuration variable is set to 6 (LCD_IF_EXT_DSI) in the FEX file. Most likely to supply power for a SSD2828 chip. However on the MSI Primo81 tablet, which is using this particular 'lcd_if = 6' setup for LCD, setting the ELDO3 voltage appears to be unnecessary and it works regardless. Having no schematics of this tablet, I can only guess that 1.2V is supplied to SSD2828 in some other way. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: Add mk802_a10s board / defconfigHans de Goede2015-01-22-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic, the axp152. For more details see: http://linux-sunxi.org/Semitime_g2 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Add mk802ii board / defconfigHans de Goede2015-01-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mk802ii is a revised version of the mk802 A10 based hdmi tv-stick, it features 1G RAM, 4G nand, a hdmi male connector, USB-A receptacle, 2 micro usb receptacles (OTG & power) and USB-wifi, and does come with an axp209 pmic. For more details see: http://linux-sunxi.org/Rikomagic_mk802ii Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Add mk802 board / defconfigHans de Goede2015-01-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not use the AXP209 pmic, it does not have a pmic at all. For more details see: http://linux-sunxi.org/Rikomagic_mk802 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Remove CONFIG_TARGET_FOO for sun4i, sun6i and sun8i boardsHans de Goede2015-01-22-53/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_TARGET_FOO is only used in board/sunxi/Makefile to select the dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some special handling of the bananapi/bananapro (both sun7i), iow it is not used at all on any sun4i, sun6i and sun8i boards so lets get rid of it there. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Convert sun4i boards to use auto dram configurationHans de Goede2015-01-22-99/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we've separate detailed dram settings for all sun4i boards, this moves them over to using auto dram configuration so that we can get rid of all the per board dram_foo.c files. Tested-by: Hans de Goede <hdegoede@redhat.com> on a A10-OLinuXino-Lime, Chuwi_V7_CW0825 and ba10_tv_box Tested-by: Zoltan HERPAI <wigyori@uid0.hu> on a pcduino Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Stop differentiating between 512M and 1G variants of the same boardHans de Goede2015-01-22-126/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on adding more boards I noticed that we lack a config for the 512M cubieboard, and that some of the new boards which I want to add also have 512M and 1G variants, rather then adding 2 defconfig's for all of these, lets switch the exising boards which have both a 512M and 1024M variant over to the sun4i dram autoconfig code. This also drops the foo_RAMSIZE_defconfig variants of boards where we currently have 2 separate configs already. Note: 1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with a value other then its default for now, but we need this to be configurable to support some new boards with auto dram config. 2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match the defaults, this is done to make it more clear what values are used for a certain board. This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G variants, the dram autoconfig code has also been tested on a 512M mk802 (a defconfig for the mk802 is added in a later patch). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: display: Make lcd display clk phase configurableHans de Goede2015-01-22-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module I noticed that the screen flickered. This is caused by the lcd display clk phase reg value being set to 0, where it should be 1 in this setup. This commit adds a Kconfig option for the lcd display clk phase, so that we can set it per board. This defaults to 1, because looking at all the fex files in sunxi-boards, that is by far the most used value. This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the default of 1 with 0, as that is the correct value for those tablets, this keeps the register settings the same as before this commit. The Olinuxino-A13 defconfigs are not updated, changing the register setting for these boards from 0 to 1, this is intentional. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-01-22-45/+315
|\ \ \ \
| * | | | board/T1040rdb: Add VSC9953 support for T1040rdb boardCodrin Ciubotariu2015-01-21-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch configures and initializes the L2 switch on T1040rdb board. The external L2 switch ports may be connected to PHYs only over QSGMII, for T1040rdb. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
| * | | | board/T1040qds: Add VSC9953 support for T1040qds boardCodrin Ciubotariu2015-01-21-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch configures and initializes the L2 switch on T1040QDS board. The L2 switch ports must be initialized according to the SerDes protocols. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
| * | | | board/T104xrdb: T1040 FMAN ports FM1@DTSEC1 and FM1@DTSEC2 have no PHYsCodrin Ciubotariu2015-01-21-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's T1040qds board may be configured to have up to 5 FMAN ports (FM1@DTSEC1 to FM1@DTSEC5). From these 5 ports, 2 of them may be fixed-links (FM1@DTSEC1 annd FM1@DTSEC2), connected to other two ports from an intergrated VSC9953 L2 Switch (switch ports 8 and 9). These fixed-link ports have no PHYs attatched, so they don't have a corresponding MDIO. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | board/T1040qds: T1040 FMAN ports FM1@DTSEC1 and FM1@DTSEC2 have no PHYsCodrin Ciubotariu2015-01-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's T1040qds board may be configured to have up to 5 FMAN ports (FM1@DTSEC1 to FM1@DTSEC5). From these 5 ports, 2 of them may be fixed-links (FM1@DTSEC1 annd FM1@DTSEC2), connected to other two ports from an intergrated VSC9953 L2 Switch (switch ports 8 and 9). These fixed-link ports have no PHYs attatched, so they don't have a corresponding MDIO. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89Codrin Ciubotariu2015-01-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>