summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* armv8: ls1043aqds: fix usb PWRFAULT settingShaohui Xie2016-06-03-2/+2
| | | | | | | | SCFG_USBPWRFAULT_DEDICATED instead of SCFG_USBPWRFAULT_SHARED should be used for USB 3 & 2. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* board: ls2080ardb: qds: Fix compiling issue when FSL_MC_ENET not definedYork Sun2016-06-03-0/+8
| | | | | | | U-Boot should continue to work without management complex (MC). Fix compiling errors and warnings. Signed-off-by: York Sun <york.sun@nxp.com>
* board: ls102xa: Fix ICID setupVincent Siles2016-06-03-2/+5
| | | | | | | LS102A ref manual dictates that ICID have to be written to the MSB of the ICID register, not to the LSB. Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
* board/freescale: Update ddr clk_adjustShengzhou Liu2016-06-03-172/+172
| | | | | | | | | This patch updates clk_adjust to actual value for boards with T-series and LS-series SoCs to match the setting of clk_adjust in latest ddr driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-05-31-7/+97
|\
| * mips: ath79: ap143: Reset ethernet on bootWills Wang2016-05-31-0/+2
| | | | | | | | | | | | This patch reset the ethernet controller for ap143 board Signed-off-by: Wills Wang <wills.wang@live.com>
| * mips: ath79: ap121: Enable ethernetWills Wang2016-05-31-0/+2
| | | | | | | | | | | | | | This patch enable network function for ap121 board. Signed-off-by: Wills Wang <wills.wang@live.com> Acked-by: Marek Vasut <marex@denx.de>
| * MIPS: Split I & D cache line size configPaul Burton2016-05-31-7/+28
| | | | | | | | | | | | | | | | | | | | | | | | Allow L1 Icache & L1 Dcache line size to be specified separately, since there's no architectural mandate that they be the same. The [id]cache_line_size functions are tidied up to take advantage of the fact that the Kconfig entries are always present to simply check them for zero rather than needing to #ifdef on their presence. Signed-off-by: Paul Burton <paul.burton@imgtec.com> [removed CONFIG_SYS_CACHELINE_SIZE in include/configs/pic32mzdask.h] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: Move cache sizes to KconfigPaul Burton2016-05-31-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | Move details of the L1 cache line sizes & total sizes into Kconfig, defaulting to 0. A new CONFIG_SYS_CACHE_SIZE_AUTO Kconfig entry is introduced to allow platforms to select auto-detection of cache sizes, and it defaults to being enabled if none of the cache sizes are set by the configuration (ie. sizes are all the default 0), and code is adjusted to #ifdef on that rather than on the definition of the sizes (which will always be defined even if 0). Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * malta: Allow MIPS64 buildsPaul Burton2016-05-31-7/+9
| | | | | | | | | | | | | | | | Both real Malta boards & emulators that mimic Malta (eg. QEMU) can support MIPS64 CPUs. Allow MIPS64 builds of U-Boot for such boards, which enables the user to make use of the whole 64 bit address space. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
* | Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-05-31-21/+59
|\ \
| * | arm: spear: x600: Add support for Micrel KSZ9031 PHYStefan Roese2016-05-31-21/+59
| |/ | | | | | | | | | | | | | | As the old ethernet PHY is not available any more, the x600 board has been redesigned with the Micrel KSZ9031 PHY. This patch adds support to autodetect the PHY and configure the Micrel PHY correctly. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-05-30-0/+29
|\ \ | |/ |/|
| * x86: galileo: Enable ACPI table generationBin Meng2016-05-30-0/+29
| | | | | | | | | | | | | | Enable ACPI table generation by creating a DSDT table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | board: am335x: Allow to choose serial device dynamicallyLokesh Vutla2016-05-27-0/+11
| | | | | | | | | | | | | | | | Different AM335x based platforms have different serial consoles. As serial console is Kconfig option a separate defconfig has to be created for each platform. So pass the serial device dynamically. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: dts: AM335x-ICEv2: Add minimal dts supportLokesh Vutla2016-05-27-0/+2
| | | | | | | | | | | | | | | | Add minimal dts support for AM335x-ICEv2 board Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
* | board: AM335x-ICEv2: Add cpsw supportLokesh Vutla2016-05-27-7/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to enable cpsw on AM335x ICEv2 board, the following needs to be done: 1)There are few on board jumper settings which gives a choice between cpsw and PRUSS, that needs to be properly selected[1]. Even after selecting this, there are few GPIOs which control these muxes that needs to be held high. 2) The clock to PHY is provided by a PLL-based clock synthesizer[2] connected via I2C. This needs to properly programmed and locked for PHY operation. And PHY needs to be reset before before being used, which is also held by a GPIO. 3) RMII mode needs to be selected. [1] http://www.ti.com/lit/zip/tidr336 [2] http://www.ti.com/lit/ds/symlink/cdce913.pdf Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | board: AM335x-ICEv2: Add DDR dataLokesh Vutla2016-05-27-1/+40
| | | | | | | | | | | | | | | | | | AM335x ICEv2 contains a 2Gbit(128Mx16) of DDR3 SDRAM(MT41J128M16JT-125), capable of running at 400MHz. Adding this specific DDR configuration details running at 400MHz. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | board: AM335x-ICEv2: Add pinmux supportLokesh Vutla2016-05-27-0/+31
| | | | | | | | | | | | | | Add necessary pinmux support for AM335x ICEv2 board. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | board: AM335x-ICEv2: Add epprom supportLokesh Vutla2016-05-27-0/+5
| | | | | | | | | | | | | | | | | | Similar to other TI's AM335x platforms, AM335x ICEv2 also has an eeprom populated for its unique identification. Adding this info so that AM335x ICEv2 specific initialization can be done. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: dts: AM335x-BBG: Add initial supportLokesh Vutla2016-05-27-0/+2
| | | | | | | | | | | | | | Add initial DTS support for AM335x-BBG Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: dts: AM335x-evmsk: Add initial supportLokesh Vutla2016-05-27-0/+2
| | | | | | | | | | | | | | Add initial DTS support for AM335x-evm sk. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: AM335x: Enable FITLokesh Vutla2016-05-27-1/+0
| | | | | | | | | | | | | | Use a single defconfig for all AM335x platforms by enabling FIT Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: am33xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+14
| | | | | | | | | | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: dts: AM437x-IDK Initial SupportLokesh Vutla2016-05-27-0/+2
| | | | | | | | | | | | | | Add initial DTS support for AM437x-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: dts: AM43x-EPOS Initial SupportLokesh Vutla2016-05-27-0/+2
| | | | | | | | | | | | | | Add initial DTS support for AM43-EPOS evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: AM43xx: Enable FITLokesh Vutla2016-05-27-2/+0
| | | | | | | | | | | | | | | | Use a single defconfig for all AM43xx platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: AM43xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+12
| | | | | | | | | | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: DRA7: configs: Remove obsolete configsLokesh Vutla2016-05-27-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed. qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: DRA7: Enable FITLokesh Vutla2016-05-27-2/+0
| | | | | | | | | | | | | | | | Use a single defconfig for all DRA7 platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: dra7: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+12
| | | | | | | | | | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: omap5: add ft_board_setup for dra7xx/am57xxDaniel Allred2016-05-27-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the board specific ft_board_setup() functions that are called when CONFIG_OF_BOARD_SETUP is defined. These functions will currently just call the ft_cpu_setup() function. Adds CONFIG_OF_BOARD_SETUP to the defconfig files for dra72_evm, dra74_evm, and am57xx_evm. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ti: AM43xx: board: Detect AM43xx HS EVMMadan Srinivas2016-05-27-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds code to detect AM43xx HS EVMS - the string in the I2C EEPROM for HS EVMs differs from GP EVMs. Adds code to for evm detection, regardless of whether the evm is for GP or HS parts, and updates board init to use that. Modifies findfdt command to pick up am437x-gp-evm.dtb for the HS EVMs also, as the boards are similar except for some security specific changes around power supply and enclosure protection. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUPRobert P. J. Day2016-05-27-48/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT: config OF_BOARD_SETUP bool "Set up board-specific details in device tree before boot" depends on OF_LIBFDT ... remove superfluous tests of CONFIG_OF_LIBFDT when testing for CONFIG_OF_BOARD_SETUP. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> [trini: Typo fix: s/ifdefi/ifdef/] Signed-off-by: Tom Rini <trini@konsulko.com>
* | MARVELL: Delete now-superfluous board/Marvell/{common, include} dirs.Robert P. J. Day2016-05-27-2450/+0
| | | | | | | | | | | | | | With dropping support for some boards and the deletion of some source files, it appears that both of these directories are now superfluous. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* | sh: Fix build errors for generic boardSimon Glass2016-05-27-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This includes the following fixes: - Define needed __init_end symbol - see initr_reloc_global_data() - Drop SH-specific struct bd_info - Add an empty relocate_code() function This prevents build errors with generic board, but the code will still need work. Perhaps this is a better alternative than deleting the code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Remove/update old generic-board documentation and warningSimon Glass2016-05-27-2/+1
| | | | | | | | | | | | | | | | Remove the warning from the Makefile, since boards that do not use generic board will no longer build. Also update documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | arm: meson: implement calls to secure monitorBeniamino Galvani2016-05-27-0/+16
| | | | | | | | | | | | Implement calls to secure monitor to read the MAC address from e-fuse. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
* | arm: add initial support for Amlogic Meson and ODROID-C2Beniamino Galvani2016-05-27-0/+136
|/ | | | | | | | | | | | This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-05-25-13/+28
|\
| * MIPS: Move CONFIG_SYS_TEXT_BASE to KconfigPaul Burton2016-05-26-0/+28
| | | | | | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to Kconfig, and add default values in board Kconfig files matching what was present in their config headers. This will make it cleaner to conditionalise the value for Malta based on 32 vs 64 bit builds. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * malta: Tidy up UART address selectionPaul Burton2016-05-26-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | The address of the UART differs based upon the system controller because it's actually within the I/O port region, which is in a different location for each system controller. Rather than handling this as 2 UARTs with the correct one selected at runtime, use I/O port accessors for the UART such that access to it gets translated into the I/O port region automatically. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-05-25-27/+36
|\ \
| * | sunxi: Enable a bunch of commands by default on sunxiHans de Goede2016-05-25-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently a set of CONFIG_CMD_FOO defines was moved from being defined in config_distro_defaults to Kconfig, and added to all sunxi defconfigs to compensate. Instead of explictly selecting these in all sunxi defconfigs, simply always select these for sunxi boards. This makes the defconfigs simpler and ensures a consistent set of available commands across all sunxi boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | Revert "sunxi: Reserve ATF memory space on A64"Andre Przywara2016-05-25-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM Trusted Firmware (ATF) code now lives in SRAM on the Pine64/A64, so we can claim the whole of DRAM for OS use. This reverts commit 3ffe39ed2b66af71c7271d0cef2a248b5bf7dfdb. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: power: add AXP809 supportChen-Yu Tsai2016-05-25-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | The A80 uses the AXP809 as its primary PMIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: power: axp818: Add support for switch SWChen-Yu Tsai2016-05-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP818 has a switchable output, SW. This is commonly used for controlling power to the LCD backlight. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Disable VIDEO for SoCs without display supportChen-Yu Tsai2016-05-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The newer chips use a newer display pipeline, which is not supported. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Add default MMC0 card detect pin for A83T, H3 and A64 SoCsChen-Yu Tsai2016-05-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | A83T, H3, and A64 have a dedicated pin for card detect on the PF pingroup. This is used in all designs. Set it as the default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Sort SoC variants by family (sunXi) first, chip name secondChen-Yu Tsai2016-05-25-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | In most other places, we sort SoC descriptions by family (sunXi) first, then by the chip name (A20). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.1 at 2024-11-14 03:01:47 +0000