summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* rockchip: Add support for Raxda Rock 2Simon Glass2016-01-21-0/+35
| | | | | | | | | | | | This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: kylin: Check fastboot requestJeffy Chen2016-01-21-0/+32
| | | | | | | | | We will save boot mode flag in grf's os_reg[4], if fastboot requested or fastboot key pressed, try to enter fastboot mode at preboot stage. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-21-17/+0
|\
| * dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass2016-01-20-17/+0
| | | | | | | | | | | | | | | | Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* | sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-21-0/+12
|/ | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* igep00x0: Cleanup ethernet supportLadislav Michl2016-01-20-14/+19
| | | | | | | | | | | - move chip reset to separate function - use CONFIG_SMC911X_BASE instead of hardcoded value - remove unneeded local variable from board_eth_init. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mkMasahiro Yamada2016-01-20-6/+0
| | | | | | | | | | The include/configs/yucca.h already has the same define: #define CONFIG_SYS_TEXT_BASE 0xfffb0000 Remove the redundant one from board/amcc/yucca/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stefan Roese <sr@denx.de>
* mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-16/+0
| | | | | | | | | | We can delete board/pb1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-16/+0
| | | | | | | | | | We can delete board/dbau1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-13/+0
| | | | | | | | | | We can delete board/micronas/vct/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* microblaze: move CONFIG_SYS_TEXT_BASE to defconfigMasahiro Yamada2016-01-20-2/+0
| | | | | | | This is how CONFIG options are defined by Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* m68k: M54418TWR: drop board/freescale/m54418twr/config.mkMasahiro Yamada2016-01-20-7/+0
| | | | | | | | | | | | | | The board/freescale/m54418twr/config.mk defined TEXT_BASE, which has the same value as CONFIG_SYS_TEXT_BASE. The TEXT_BASE is referenced by two files: - arch/m68k/cpu/mcf5445x/start.S and include/ - include/configs/M54418TWR.h Replace the references with CONFIG_SYS_TEXT_BASE and delete board/freescale/m54418twr/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it>
* m68k: move CONFIG_SYS_TEXT_BASE to defconfig filesMasahiro Yamada2016-01-20-124/+0
| | | | | | | | | | | | | | | | | | | | | | | | For historical reason, CONFIG_SYS_TEXT_BASE has been specified in various ways: [1] by board/${VENDOR}/${BOARD}/config.mk [2] by CONFIG_SYS_EXTRA_OPTIONS (This was "options" field of boards.cfg before Kconfig conversion) [3] by include/configs/${BOARD}.h [4] by configs/${BOARD}_defconfig Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (Kconfig). We still allow [3] too, because it is still used by many boards and we expect much time for conversion. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it> Reviewed-by: Simon Glass <sjg@chromium.org>
* armv8: cavium: Get DRAM size from ATFSergey Temerkhanov2016-01-19-0/+27
| | | | | | | | Change the dram_init() function on ThunderX to query ATF services for the real installed DRAM size Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* armv8: cavium: Add an implementation of ATF calling functionsSergey Temerkhanov2016-01-19-1/+313
| | | | | | | | This commit adds functions issuing calls to the product-specific ATF services Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov2016-01-19-0/+116
| | | | | | | | | This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-309/+49
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* MIPS: vct: fix I/O accessor callsDaniel Schwierzeck2016-01-16-2/+4
| | | | | | | | Use void pointers as address argument for readl( and writel()). This is required for the upcoming MIPS asm header file and I/O accessor update. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* MIPS: malta: fix IO accessor callDaniel Schwierzeck2016-01-16-1/+2
| | | | | | | Use void pointer as address argument for readl(). This is required for the upcoming MIPS asm header file and I/O accessor update. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* MIPS: au1x00: move SoC header files to arch/mips/mach-au1x00/include/mach/Daniel Schwierzeck2016-01-16-4/+4
| | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* Fix GCC format-security errors and convert sprintfs.Ben Whitten2016-01-14-24/+24
| | | | | | | | | | | With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-14-0/+2
|\
| * x86: ivybridge: Do not require HAVE_INTEL_MEBin Meng2016-01-13-0/+2
| | | | | | | | | | | | | | | | | | Do not set HAVE_INTEL_ME by default as for some cases Intel ME firmware even does not reside on the same SPI flash as U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-01-14-67/+661
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * | mvebu: ds414: Implement Synology specific command setPhil Sutter2016-01-14-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Synology keeps per item configuration in a dedicated 'partition' in SPI flash, namely the one named 'vendor' in DTS file. It contains the two NICs MAC addresses as well as the item's serial number. I didn't find a way to have this information extracted automatically, therefore implemented 'syno populate_env' command which extracts the three values and puts them into environment. To make things permanent though, one has to 'saveenv'. Another command is 'syno clk_gate', which allows to change the clock gating which is done in DS414 board file. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | mvebu: Support Synology DS414Phil Sutter2016-01-14-0/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | arm: mvebu: Consolidate board Kconfig options into one fileStefan Roese2016-01-14-45/+0
| | | | | | | | | | | | | | | | | | | | | | | | Merging all the board specific Kconfig options into the main Kconfig file for mach-mvebu makes things easier to maintain. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Add SolidRun ClearFog Armada 38x initial supportStefan Roese2016-01-14-0/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | net: mvneta: Convert to driver modelStefan Roese2016-01-14-31/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update this driver to support driver model. As all MVEBU boards using this driver are converted with this patch, the non-driver-model code can be removed completely. This is also the reason why this patch is quite big and includes a) the driver change and b) the platform change. As its not git-bisect save otherwise. With this conversion, some parameters are now extracted from the DT instread of using the config header defines. The supported properties right now are: PHY-mode ("phy-mode") and PHY-address ("reg"). The base addresses for the ethernet controllers can be removed from the header files as well. Please note that this patch also removes the E1000 network driver from some MVEBU config headers. This is necessary, as with DM_ETH configured and the e1000 driver enabled, the PCI driver also needs to support DM. But the MVEBU PCI(e) driver still needs to get ported to DM. When this is done, the E1000 driver can be enabled again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org>
| * | arm: mvebu: Add DM and OF_CONTROL support to SPLStefan Roese2016-01-14-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds full DM support to the SPL on MVEBU. Currently only serial is supported. Other drivers will follow. This patch also adds the necessary config values for the DEBUG UART to the MVEBU defconfig files. This came in handy while implementing this DM support. Additionally, the mvebu specific SPL linker script is removed and this common one is used instead: arch/arm/cpu/u-boot-spl.lds This common linker script already handles all special cases. No need to reinvent the wheel for MVEBU here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* | | sniper: Mux configuration cleanupPaul Kocialkowski2016-01-13-37/+37
| | | | | | | | | | | | | | | | | | | | | This cleans up the mux configuration a bit, setting mmc clock signals to input enabled and specifying pull-down (0) when pull is not used. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* | | block: pass block dev not num to read/write/erase()Stephen Warren2016-01-13-5/+5
|/ / | | | | | | | | | | | | | | | | | | | | This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | dm: tegra: net: Convert tegra boards to driver model for EthernetSimon Glass2016-01-12-32/+0
|/ | | | | | | | | Adjust all Tegra boards to use driver model for Ethernet, now that the required drivers are converted. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* MAINTAINERS/mailmap: Update my email addressFabio Estevam2016-01-11-11/+11
| | | | | | Update my email address to the NXP account. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-10-6/+7
|\
| * cgtqmx6eval: README: Fix parameter of 'sf write' commandOtavio Salvador2016-01-10-1/+5
| | | | | | | | | | | | | | | | | | | | | | 'sf command' should receive the length in sector boundaries, so fix it accordingly. Also, show the steps to set the server and board IP addresses for making the steps clearer. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx6cuboxi: Remove obsolete commentFabio Estevam2016-01-10-4/+0
| | | | | | | | | | | | | | | | | | We currently support various versions of Solidrun mx6 boards, so remove the obsolete comment. Reported-by: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * mx6cuboxi: Fix the reset delay for the AR8035 PHYFabio Estevam2016-01-10-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is registered") Ethernet is no longer functional: Booting from net ... FEC Waiting for PHY auto negotiation to complete......... TIMEOUT ! BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 This commit does not have an issue in itself, but it revelead a problem with the Ethernet initialization. As per the AR8035 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and keep the reset low for 10ms. Also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros PHY can be loaded as per Troy Kisky's suggestion. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-08-69/+6
|\ \ | |/
| * pfuze: Fix unsigned variable for less-than-zero comparisonYe.Li2016-01-07-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | According to the Coverity result, a unsigned int variable is used fo less- than-zero comparison, the result is never true. Need to fix the variable type to signed int. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * wandboard: Simplify the Ethernet PHY configurationFabio Estevam2016-01-07-34/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per the AR8031 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros 8031 PHY driver can be loaded automatically. This results in a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * mx6sabresd: Simplify the Ethernet PHY configurationFabio Estevam2016-01-07-34/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per the AR8031 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros 8031 PHY driver can be loaded automatically. This results in a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | MAINTAINERS, .mailmap: Update my email addressYork Sun2016-01-08-2/+2
|/ | | | | | Change from yorksun@freescale.com to york.sun@nxp.com. Signed-off-by: York Sun <york.sun@nxp.com>
* qemu-ppce500: pass 'range_id' around in pci_map_regionMiao Yan2016-01-04-1/+1
| | | | | | | | | | In pci_map_region(), pass 'range_id' to fdt_read_range(), otherwise the same address will be mapped again in other calls to pci_map_region() Signed-off-by: Miao Yan <yammiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-03-8/+93
|\
| * imx: mx6qsabreauto: support lvds displayPeng Fan2016-01-03-3/+84
| | | | | | | | | | | | | | | | | | | | | | Move setup_display from board_early_init_f to board_init. Add more clock settings. Add blacklight iomux setting. Add display_info_t info for the lvds screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * cgtqmx6eval: fix pad configuration for SPI busMichael Schanz2016-01-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Use the macro SETUP_IOMUX_PAD(...) rather than imx_iomux_v3_setup_multiple_pads(...) in order to setup the pin configuration for ECSPI1. ARRAY_SIZE(pads) provides the wrong size for imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads)) in case of MX6QDL. In the particular case, the content of GPR12 is overwritten and the IPG/AHB/ATB/ATP clocks are deactivated. Therefore, the connection to the system via JTAG is not possible anymore. Furthermore, kernel version 3.0.35 hangs during bootprocess in the function etm_init(). Signed-off-by: Michael Schanz <michael.schanz@congatec.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx6sxsabresd: Fix Ethernet PHY reset sequenceFabio Estevam2015-12-07-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is registered") Ethernet is no longer functional. This commit does not have an issue in itself, but it revelead a problem with the Ethernet initialization. Fix this by calling enable_fec_anatop_clock() earlier and also by adding a 10ms reset delay as recommended in the AR8031 datasheet. Suggested-by: Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * cgtqmx6eval: Fix defconfig nameOtavio Salvador2015-12-07-1/+1
| | | | | | | | | | | | After the conversion to SPL the defconfig was renamed, so adjust it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-12-24-39/+36
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: include/configs/axs101.h Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-11-10 01:18:18 +0000