summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* pandora: don't enable VAUX3, VDAC and VPLL2 regulatorsGrazvydas Ignotas2010-01-04-1/+0
| | | | | | | | These regulators are not needed to start the kernel and only cause "incomplete constraints" warnings from kernel, so don't turn them on to save power. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
* TWL4030: make LEDs selectable for twl4030_led_init()Grazvydas Ignotas2010-01-04-6/+6
| | | | | | | | | | | | Not all boards have both LEDs hooked, so enabling both on boards with single LED will just waste power. Make it possible to choose LEDs by adding argument to twl4030_led_init(). Using this turn on only LEDB for pandora, leave both LEDs on for all other boards, as it was before this patch. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
* move prototypes for gunzip() and zunzip() to common.hWolfgang Wegner2009-12-21-38/+0
| | | | | | | | Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus repeated in every file using it. This patch moves the prototypes to common.h and removes all prototypes distributed anywhere else. Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2009-12-21-4/+8
|\
| * OMAP3 zoom2 Use usbtty if the debug board is not connected.Tom Rix2009-12-20-4/+8
| | | | | | | | | | | | | | | | | | | | The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* | Net: Clean up LAN91C96 SupportBen Warren2009-12-14-1/+132
| | | | | | | | | | | | | | | | A previous Commit converted the LAN91C96 Ethernet driver to using the CONFIG_NET_MULTI API, but did not include full board support. This patch finishes the job. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | LAN91C96: Enable NET_MULTI LAN driverNishanth Menon2009-12-13-5/+7
| | | | | | | | | | | | | | | | | | This modification is NOT tested on any of the platforms modified as I dont have them. please help by testing+building+fixing Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | TI OMAP3: SDP3430 FIX NET_MULTI WarningNishanth Menon2009-12-13-5/+7
|/ | | | | | | | | Enable the NET MULTI option and remove build warning Tested: SDP3430 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* 5xxx, fdt: move fdt_fixup_memory() to cpu.c fileHeiko Schocher2009-12-08-14/+0
| | | | | | | | u-boot updates, before starting Linux, the memory node in the DTS. As this is a "standard" feature, move this functionality to the cpu.c file for mpc5xxx and mpc512x processors. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' into nextWolfgang Denk2009-12-07-4/+9
|\ | | | | | | | | | | | | Conflicts: lib_generic/zlib.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 52xx, manroland: add fdt_fixup_memory() in ft_board_setup()Heiko Schocher2009-12-07-0/+4
| | | | | | | | | | | | | | | | To update the real memory size in the memory node on the uc101 and mucmc52 boards call fdt_fixup_memory() in ft_board_setup(). Signed-off-by: Heiko Schocher <hs@denx.de>
| * at91sam9261ek.c: fix minor coding style issue.Wolfgang Denk2009-12-07-4/+5
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | POST: Remove duplicated post_hotkey_pressed() functionsStefan Roese2009-12-07-232/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a weak default function for post_hotkey_pressed(), returning 0, for boards without hotkey support. The long-running tests won't be started on those boards. This default function was implemented in many board directories. By implementing this weak default we can remove all those duplicate versions. Boards with hotkey support, can override this weak default function by defining one in their board specific code. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' into nextWolfgang Denk2009-12-05-52/+44
|\ \ | |/ | | | | | | | | | | | | Conflicts: board/esd/plu405/plu405.c drivers/rtc/ftrtc010.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk2009-11-24-1/+2
| |\
| | * OMAP3: pandora: fix booting without serial attachedGrazvydas Ignotas2009-11-24-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the board is booted without serial cable attached (which is how most of them will be used) UART RX is left floating and sometimes picks noise, which interrupts countdown and enters U-Boot prompt instead of booting the kernel. Fix this by setting up internal pullup on UART RX pin. This does not prevent serial from working as the internal pullup is weak. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
| * | mpc8260: move FDT memory node fixup into common CPU code.Marcel Ziswiler2009-11-22-52/+1
| | | | | | | | | | | | | | | Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Tested-by: Heiko Schocher <hs@denx.de>
| * | ppc4xx: Initialize magnetic coupler on VOM405 boardsMatthias Fuchs2009-11-17-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an ugly behavior of the IL712 magnetic coupler as used on VOM405. These parts will remember their last state over a power cycle which might cause unwanted behavior. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Initialize magnetic couplers in PLU405Matthias Fuchs2009-11-17-0/+36
| |/ | | | | | | | | | | | | | | | | This patch fixes an ugly behavior of the IL712 magnetic couplers as used on PLU405. These parts will remember their last state over a power cycle which might cause unwanted behavior. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | Generic udelay() with watchdog supportIngo van Lil2009-12-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | According to the PPC reference implementation the udelay() function is responsible for resetting the watchdog timer as frequently as needed. Most other architectures do not meet that requirement, so long-running operations might result in a watchdog reset. This patch adds a generic udelay() function which takes care of resetting the watchdog before calling an architecture-specific __udelay(). Signed-off-by: Ingo van Lil <inguin@gmx.de>
* | i386: Final RelocationGraeme Russ2009-12-05-9/+38
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Remove inline asm symbols from .dynsymGraeme Russ2009-12-05-0/+2
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Fix link collisions resulting from gcc4.4.1 upgradeGraeme Russ2009-12-05-0/+1
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Fix dlmalloc compile warningGraeme Russ2009-12-05-0/+1
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | Merge branch 'next-sync' of git://git.denx.de/u-boot-arm into nextWolfgang Denk2009-12-01-28/+596
|\ \
| * | arm: A320: Add support for Faraday A320 evaluation boardPo-Yu Chuang2009-11-27-0/+277
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
| * | TI DaVinci DM646x: Enable NAND on DM6467 EVMSandeep Paulraj2009-11-27-0/+11
| | | | | | | | | | | | | | | | | | This patch enables NAND on the DM6467 EVM Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | TI DA8xx: Add new directory for da830evm boardSekhar Nori2009-11-27-0/+221
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new directory for da830evm board Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/ Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
| * | TI Davinci: add a pin multiplexer configuration APINick Thompson2009-11-27-1/+59
| | | | | | | | | | | | | | | | | | | | | | | | Creates a method allowing pin settings to be logically grouped into data structure arrays and provides an API to configure the pinmux settings to enable the relevant pin functions. Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
| * | OMAP3: pandora: fix booting without serial attachedGrazvydas Ignotas2009-11-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the board is booted without serial cable attached (which is how most of them will be used) UART RX is left floating and sometimes picks noise, which interrupts countdown and enters U-Boot prompt instead of booting the kernel. Fix this by setting up internal pullup on UART RX pin. This does not prevent serial from working as the internal pullup is weak. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
| * | Add a unified s3c24x0 header filekevin.morfitt@fearnside-systems.co.uk2009-11-27-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Clean-up of s3c24x0 header fileskevin.morfitt@fearnside-systems.co.uk2009-11-27-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleans up the s3c24x0 header files: s4c24x0.h: removes the use of 'volatile' from the S3C24X0_REG8, S3C24X0_REG16 and S3C24X0_REG32 register typedef's. Registers are always accessed using the IO accessor functions which cast the register address as 'volatile' anyway so it isn't required here. s3c2400.h and s3c2410.h: insert a blank line between the static inline functions Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
| * | s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xxMinkyu Kang2009-11-27-2/+2
| | | | | | | | | | | | | | | | | | | | | This patch moves the s3c64xx header files from include/ to include/asm-arm/arch-s3c64xx Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Move s3c24x0 header files to asm-arm/arch-s3c24x0/kevin.morfitt@fearnside-systems.co.uk2009-11-27-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the s3c24x0 header files from include/ to include/asm-arm/arch-s3c24x0/. checkpatch.pl showed 2 errors and 3 warnings. The 2 errors were both due to a non-UTF8 character in David M?ller's name: ERROR: Invalid UTF-8, patch and commit message should be encoded in UTF-8 #489: FILE: include/asm-arm/arch-s3c24x0/s3c2410.h:3: + * David M?ller ELSOFT AG Switzerland. d.mueller@elsoft.ch As David's name correctly contains a non-UTF8 character I haven't fixed these errors. The 3 warnings were all because of the use of 'volatile' in s3c24x0.h: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt #673: FILE: include/asm-arm/arch-s3c24x0/s3c24x0.h:35: +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; I'll fix these errors in another patch. Tested by running MAKEALL for ARM8 targets and ensuring there were no new errors or warnings. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | sheevaplug: correct SDRAM address control registerMark Asselstine2009-11-27-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | value The SheevaPlug DevKit is shipped with 4x8 by 1Gb DDR devices in two banks for a total of 512MB of RAM. Based on this configuration the existing values for SDRAM address control register are incorrect and result in random kernel oops as memory is incorrectly accessed (while for example extracting a large tarball such as a rootfs). Based on the hardware configuration along with the supporting documentation from Marvell these are the correct values, as well this change mimics values previously used in Marvell's own u-boot git tree for the SheevaPlug. Other variants of the hardware such as the PogoPlug and TonidoPlug may have different memory configurations but to properly support those additional board directories should be maintained or a better system to support other kwb*.cfg is needed. Tested on SheevaPlug DevKit. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
* | | ppc4xx: Remove autoupdate feature from PLU405 boardMatthias Fuchs2009-11-25-17/+0
|/ / | | | | | | | | | | | | | | The autoupdate feature is not used on PLU405 boards. So remove it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Remove confusing commentMatthias Fuchs2009-11-19-4/+0
| | | | | | | | | | | | | | This is not the sequoia board. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate pci_master_init() functionStefan Roese2009-11-19-182/+13
| | | | | | | | | | | | | | | | This patch removes the duplicted implementations of the pci_master_init() function by introducing a weak default function for it. It can be overridden by a board specific version. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate pci_pre_init() functionStefan Roese2009-11-19-813/+16
| | | | | | | | | | | | | | | | | | This patch removes the duplicted implementations of the pci_pre_init() function by introducing a weak default function for it. This weak default has a different implementation for some PPC variants. It can be overridden by a board specific version. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate pci_target_init() functionStefan Roese2009-11-19-1020/+4
| | | | | | | | | | | | | | | | | | | | This patch removes the duplicted implementations of the pci_target_init() function by introducing a weak default function for it. This weak default has a different implementation for 440EP(x)/GR(x) PPC's. It can be overridden by a board specific version (e.g. PMC440, korat). Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* | Merge branch 'master' into nextWolfgang Denk2009-11-15-88/+64
|\ \ | |/
| * 86xx: Remove redundant code in initdramBecky Bruce2009-11-04-15/+0
| | | | | | | | | | | | | | | | The same code exists both inside an #ifdef and outside of it. Remove the extra code for all the 86xx boards. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"Kumar Gala2009-11-04-10/+10
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc. There isn't any need to modify the API for fsl_pci_init_port to pass the status of host/agent(end-point) status. We can determine that internally to fsl_pci_init_port. Revert the patch that makes the API change. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * sh: Update lowlevel_init.S of espt-gigaNobuhiro Iwamatsu2009-10-30-9/+1
| | | | | | | | | | | | | | There was the point that did not use write macro. Change to write macro. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Move some defs to convince 'pcrel too far'Nobuhiro Iwamatsu2009-10-30-54/+53
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Takashi Yoshii <yoshii.takashi@gmail.com>
* | ppc4xx: Katmai: Add chip_config commandStefan Roese2009-11-10-219/+58
| | | | | | | | | | | | | | This patch removes the Katmai "bootstrap" command and replaces it with the now common command "chip_config". Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Fix NAND booting targets after 4xx linker script consolidationStefan Roese2009-11-09-0/+20
| | | | | | | | | | | | | | Somehow I missed the NAND booting targets in the 4xx linker script consolidation patchset. This patch fixes this issue. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Remove duplicated is_pci_host() functionsStefan Roese2009-11-09-387/+5
| | | | | | | | | | | | | | | | | | This patch introduces a weak default function for is_pci_host(), returning 1. This is the default behaviour, since most boards only implement PCI host functionality. This weak default can be overridden by a board specific version if needed. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate 4xx PCIe board specific configurationStefan Roese2009-11-09-442/+41
| | | | | | | | | | | | | | | | | | This patch consolidates the PPC4xx board specific PCIe configuration code. This way the duplicated code is removed. Boards can implement a special, non standard behaviour (e.g. number of PCIe slots, etc) by overriding the weak default functions. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Remove board specific linker scripts from most PPC4xx boardsStefan Roese2009-11-02-9566/+0
| | | | | | | | | | | | | | | | | | All these linker scripts can be removed since the new common ppc4xx linker script should be able to handle all of those boards. Please test and report problems. Thanks. Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-09-05 21:56:52 +0000