summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
...
| * Support for the Calao TNY-A9260/TNY-A9G20 boardsAlbin Tonnerre2009-09-01-0/+216
| | | | | | | | | | | | | | | | | | | | | | | | The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by Calao Systems <http://www.calao-systems.com>. Their components are very similar to the AT91SAM9260EK board, so their configuration is based on the configuration of this board. There are however some differences: different clocks, no LCD, no ethernet. They also can use SPI EEPROM to store the environment. Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Add support for the Calao SBC35-A9G20 boardAlbin Tonnerre2009-09-01-0/+310
| | | | | | | | | | | | | | | | | | | | | | The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND flash, two USB host ports, and an USB device port. More informations can be found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936> Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
| * imx27lite: add support for imx27lite board from LogicPDIlya Yanok2009-09-01-0/+295
| | | | | | | | | | | | | | | | | | This patch adds support for i.MX27-LITEKIT development board from LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND flash, FEC ethernet controller integrated into i.MX27. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Wolfgang Denk <wd@denx.de>
| * at91sam9260/afeb9260: Fix SPI initializationAlbin Tonnerre2009-09-01-2/+2
| | | | | | | | | | | | | | Commit 7ebafb7ec1a0285af8380623c009576f92583b98 introduced a mistake in the spi init function call for those boards. This patch fixes this. Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
* | License cleanup: remove unintended "All Rights Reserved" notices.Wolfgang Denk2009-09-04-1/+0
| | | | | | | | | | | | | | | | Some files included my old standerd file header which had a "All Rights Reserved" part. As this has never been my intention, I remove these lines to make the files compatible with GPL v.2 and later. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | ppc: Remove -fno-strict-aliasingKumar Gala2009-09-04-1/+1
| | | | | | | | | | | | -fno-strict-aliasing is hidding warnings. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Add PCI support to eNET boardGraeme Russ2009-09-04-0/+96
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Moved PCI from #ifdef to conditional compile for sc520 boardsGraeme Russ2009-09-04-554/+615
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structureGraeme Russ2009-09-04-245/+237
| | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | Fixup sc520_spunk boardGraeme Russ2009-09-04-2/+31
| | | | | | | | | | | | | | | | Primary intent is to resolve build errors for this board which has been neglected for a very long time. I do not have one of these boards, so I cannot test functionality Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Misc PCI fixupsGraeme Russ2009-09-04-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in commit ff4e66e93c1a, regressed by commit 6d7f610b09f8) Cast PCI_ROM_ADDRESS_MASK to u32 Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO Change call to pci_find_class() to pci_find_devices(). This is based on a patch submitted on 1st March 2007 (Patch that fixes the compilation errors for sc520_cdp board) by mushtaq_k This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be specified in the board config file. Dummy values have been added for the SC520 CDP board to enable compilation, but since I do not have one of these, I do know what the values should be Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | i386: Change inline asm global symbols to localGraeme Russ2009-09-04-2/+2
| | | | | | | | | | | | | | | | gcc 4.3.2 optimiser creates multiple copies of inline asm (who knows why) Remove use of global names for labels to prevent 'symbol already defined' errors Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | Blackfin: cm-bf548: fix device->stdio_dev falloutMike Frysinger2009-09-02-3/+3
| | | | | | | | | | | | | | The recent 52cb4d4fb348 commit which renamed device to stdio_dev missed the cm-bf548's video board. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Blackfin: cm-bf537u: new board portHarald Krapfenbauer2009-09-02-0/+258
|/ | | | | | | | The CM-BF537U is similar to the CM-BF537E module, but enough to need its own board port. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'next' of ../nextWolfgang Denk2009-08-31-3752/+1426
|\
| * fsl: simplify the "mac id" command, improve boot-time informational messageTimur Tabi2009-08-28-32/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "mac id" command took a 4-character parameter as the identifier string. However, for any given board, only one kind of identifier is acceptable, so it makes no sense to ask the user to type it in. Instead, if the user enters "mac id", the identifier (and also the version, if it's NXID) will automatically be set to the correct value. Improve the message that is displayed when EEPROM is read during boot. It now displays "EEPROM:" and then either an error message or the EEPROM identifier if successful. If the identifier in EEPROM is valid, then always reject a bad CRC, even if the CRC field has not been initialized. Don't force the MAC address count to MAX_NUM_PORTS or less. Forcing the value to be changed resulting in an in-memory copy that does not match what's in hardware, even though the user did not request that change. Finally, always update the CRC value in the in-memory copy after any field is changed, so that the CRC is always correct. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Added PCIe support for P1 P2 RDBPoonam Aggrwal2009-08-28-1/+119
| | | | | | | | | | | | | | Call fsl_pci_init_port() to initialize all the PCIe ports on the board. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Init pci ethernet cards if we enable any on MPC8572DSKumar Gala2009-08-28-1/+2
| | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * xes: Use proper IO access functionsPeter Tyser2009-08-28-38/+37
| | | | | | | | | | | | | | Also fix some minor whitespace oddities while we're cleaning up Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Move to a common linker scriptKumar Gala2009-08-28-3492/+0
| | | | | | | | | | | | | | | | There are really no differences between all the 85xx linker scripts so we can just move to a single common one. Board code is still able to override the common one if need be. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Add support for P2020RDB boardPoonam Aggrwal2009-08-28-0/+809
| | | | | | | | | | | | | | | | | | | | | | | | | | The code base adds P1 & P2 RDB platforms support. The folder and file names can cater to future SOCs of P1/P2 family. P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series. Tested following on P2020RDB: 1. eTSECs 2. DDR, NAND, NOR, I2C. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * stx: create common vendor/board hierarchy for STx boardsAlex Dubov2009-08-28-0/+0
| | | | | | | | | | | | | | | | Move files belonging to the STx boards into common vendor directory and update the Makefile to reflect this. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 86xx: Remove redudant PLATFORM_CPPFLAGSKumar Gala2009-08-28-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | For historic reasons we had defined some additional PLATFORM_CPPFLAGS like: PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 However these are all captured in the config.h and thus redudant. Also moved common 86xx flags into cpu/mpc86xx/config.mk. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Remove redudant PLATFORM_CPPFLAGSKumar Gala2009-08-28-80/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | For historic reasons we had defined some additional PLATFORM_CPPFLAGS like: PLATFORM_CPPFLAGS += -DCONFIG_E500=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1 However these are all captured in the config.h and thus redudant. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Cleanup whitespace in mpc8536ds.cKumar Gala2009-08-28-11/+5
| | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_initKumar Gala2009-08-28-118/+0
| | | | | | | | | | | | | | | | Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows before it calls fsl_pci_init. There isn't any reason to just call it from fsl_pci_init and simplify things a bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * pci/fsl_pci_init: Fold pci_setup_indirect into fsl_pci_initKumar Gala2009-08-28-92/+37
| | | | | | | | | | | | | | | | Every platform that calls fsl_pci_init calls pci_setup_indirect before it calls fsl_pci_init. There isn't any reason to just call it from fsl_pci_init and simplify things a bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Merge branch 'next' of git://git.denx.de/u-boot-net into nextWolfgang Denk2009-08-25-10/+210
| |\
| | * Convert CS8900 Ethernet driver to CONFIG_NET_MULTI APIBen Warren2009-08-25-10/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All in-tree boards that use this controller have CONFIG_NET_MULTI added Also: - changed CONFIG_DRIVER_CS8900 to CONFIG_CS8900 - changed CS8900_BASE to CONFIG_CS8900_BASE - changed CS8900_BUS?? to CONFIG_CS8900_BUS?? - cleaned up line lengths - modified VCMA9 command function that accesses the device - removed MAC address initialization from lib_arm/board.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Tested-by: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
| * | Merge branch 'master' into nextWolfgang Denk2009-08-25-9/+9
| |\ \ | | |/ | |/|
| * | Replace BCD2BIN and BIN2BCD macros with inline functionsAlbin Tonnerre2009-08-25-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the process, also remove backward-compatiblity macros BIN_TO_BCD and BCD_TO_BIN and update the sole board using them to use the new bin2bcd and bcd2bin instead Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
| * | Add support for the galaxy5200Eric Millbrandt2009-08-25-0/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the DEKA Research and Development galaxy5200 board The galaxy5200 is an Freescale mpc5200 based embedded industrial control board. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
* | | Add common code dir for Matrix Vision boards.Andre Schwarz2009-08-31-0/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes current build failure. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> mvblm7.c: fix warning: implicit declaration of function 'mv_reset_environment' Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Use common code for Matrix Vision boardsAndré Schwarz2009-08-28-145/+56
| |/ |/| | | | | | | | | | | Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by using common code. Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
* | Blackfin: fix typos in gpio commentsMike Frysinger2009-08-23-9/+9
|/ | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* sh/rsk7203: add missing include net.hJean-Christophe PLAGNIOL-VILLARD2009-08-23-0/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* qemu-mips: Fix Qemu websiteMichal Simek2009-08-22-1/+1
| | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@petalogix.com> Acked-by: Shinya Kuribayashi <skuribay@pobox.com>
* TRAB: make independent of specific libgcc helper routinesWolfgang Denk2009-08-21-2/+0
| | | | | | | | | | The TRAB board references local libgcc helper routines (lib_arm/div0.o and lib_arm/_umodsi3.o) which cause build problems when we try to use the normal, compiler provided libgcc instead. Removing these references allows to build both with and without the local libgcc helper routines. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix all linker scripts for older binutils versions (pre-2.16)Wolfgang Denk2009-08-21-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f62fb99941c6 fixed handling of all rodata sections by using a wildcard combined with calls to ld's builtin functions SORT_BY_ALIGNMENT() and SORT_BY_NAME(). Unfortunately these functions were only introduced with biunutils version 2.16, so the modification broke building with all tool chains using older binutils. This patch makes it work again. This is done by omitting the use of these functions for such old tool chains. This will result in slightly larger target binaries, as the rodata sections are no longer in optimal order alignment-wise which reauls in unused gaps, but the effect was found to be insignificant - especially compared to the fact that you cannot build U-Boot at all in the current state. As ld seems to have no support for conditionals we run the linker script through the C preprocessor which can be easily used to remove the unwanted function calls. Note that the C preprocessor must be run with the "-ansi" (or a "-std=") option to make sure all the system-specific predefined macros outside the reserved namespace are suppressed. Otherise, cpp might for example substitute "powerpc" to "1", thus corrupting for example "OUTPUT_ARCH(powerpc)" etc. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-08-18-16/+18
|\
| * ppc4xx: Fix "chip_config" command for AMCC ArchesStefan Roese2009-08-18-16/+18
| | | | | | | | | | | | | | | | | | | | This patch fixes the "chip_config" command for I2C bootstrap EEPROM configuration. First it changes the I2C bootstrap EEPROM address to 0x54 as this is used on Arches (instead of 0x52 on Canyonlands/ Glacier). Additionally, the NAND bootstrap settings are removed for Arches since Arches doesn't support NAND-booting. Signed-off-by: Stefan Roese <sr@denx.de>
* | Monahans: avoid floating point calculationsWolfgang Denk2009-08-17-6/+10
|/ | | | | | | | | | | Current code for the Monahans CPU defined OSCR_CLK_FREQ as 3.250 (MHz) which caused floating point operations to be used. This resulted in unresolved references to some FP related libgcc functions when using U-Boot's private libgcc functions. Change the code to use fixed point math only. Signed-off-by: Wolfgang Denk <wd@denx.de>
* trab: rename spi_init()Mike Frysinger2009-08-13-7/+7
| | | | | | | The local board-specific spi_init() function conflicts with the common SPI layer, so rename it to something board-specific. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-08-11-0/+1
|\
| * 83xx, kmeter1, fix: update in the DTS the correct size for the first flashHeiko Schocher2009-07-29-0/+1
| | | | | | | | | | | | | | | | | | When updating the "reg" in the "/localbus/flash@f0000000,0" node size was wrong updated for the first flash, because the total size was filled in, instead of the right size for it. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2009-08-11-1/+1
|\ \
| * | MIMC200: reduce LCD pixclockMark Jackson2009-08-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The initial pixclock for the MIMC200 board is wrong (and causes screen corruption due to DMA underruns). This patch simply reduces the pixel clock to fix the problem. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
* | | ARM: Davinci DM355: Enabling DM9000 on DM355 EVMSandeep Paulraj2009-08-10-1/+9
|/ / | | | | | | | | | | | | | | | | | | Due to recent changes to the NET support on U-boot, DM9000 is no longer detected on the DM355 EVM. This minor update enables DM9000 on the DM355 EVM. Tested on the DM355 EVM Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Dual-license IBM code contributionsJosh Boyer2009-08-09-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | It was brought to our attention that U-Boot contains code derived from the IBM OpenBIOS source code originally provided with some of the older PowerPC 4xx development boards. As a result, the original license of this code has been carried in the various files for a number of years in the U-Boot project. IBM is dual-licensing the IBM code contributions already present in U-Boot under either the terms of the GNU General Public License version 2, or the original code license already present. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | digsy_mtc: Add delay in SPI transfers to the companion controller.Detlev Zundel2009-08-09-20/+27
| | | | | | | | | | | | | | While at it, remove initialization of variables which will be set before usage in all cases. Signed-off-by: Detlev Zundel <dzu@denx.de>
generated by cgit v1.1 at 2024-11-02 04:08:03 +0000