summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
...
| | * | | | | | imx6: ventana: fix system-serial dt propertyTim Harvey2014-05-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typo in setting of system-serial property causing the prop len to be off by 1. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| | * | | | | | ventana: Add support for the LTC3676 PMICTim Harvey2014-05-09-23/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1 and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar values for the LTC3676 are board-specific as they relate to a resistor devider chosen by the board design. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| | * | | | | | ventana: use non-generic pfuze100 initTim Harvey2014-05-09-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| | * | | | | | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-04-29-972/+2004
| | |\ \ \ \ \ \ | | | | |/ / / / | | | |/| | | |
| | * | | | | | nitrogen6x: Fix the PAD settings for the ECSPI chipselectFabio Estevam2014-04-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ECSPI chipselect (MX6_PAD_EIM_D19__GPIO3_IO19) is used with GPIO functionality, so it does not make sense to set its pad as SPI pin. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | | | | mx6slevk: Add SPI NOR flash supportFabio Estevam2014-04-28-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| | * | | | | | ventana: remove redundant includeTim Harvey2014-04-28-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| | * | | | | | ventana: fixed comments in eeprom headerTim Harvey2014-04-28-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix several invalid comments regarding the EEPROM structure used by Gateworks Ventana boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| | * | | | | | embest/mx6boards: use common detect_hdmiEric Benard2014-04-15-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com>
| | * | | | | | mx6sabresd: use common detect_hdmiEric Benard2014-04-15-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com>
| | * | | | | | nitrogen6x: use common detect_hdmiEric Benard2014-04-15-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com>
| | * | | | | | RiOTboard and MarSBoard: add new boards supportEric Benard2014-04-15-0/+616
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RiOTboard is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested : - UART2 (console) - eMMC - SDCard - uSDCard - Ethernet - USB Host (through 4 ports hub) - HDMI output - I2C 1/2/3 - LVDS TFT with LCD8000-97C from Embest/Element 14 Boot on eMMC and through USB loader are tested. For more informations on this board : http://www.riotboard.org/ MarSBoard is produced by Embest/Element 14 and is based on i.MX6 Dual The following features are tested : - UART2 (console) - eMMC - uSDCard - Ethernet - USB Host (through 2 ports hub) - HDMI output - I2C 1/2 - SPI NOR Flash - LVDS TFT with LCD8000-97C from Embest/Element 14 Boot on SPI NOR and through USB loader are tested. For more informations on this board : http://www.embest-tech.com/shop/star/marsboard.html Both boards are supported by the same code base as they are based on a common trunk of schematics. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | | | | mx6sabresd: use common board_video_skipEric Benard2014-04-15-56/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com>
| | * | | | | | nitrogen6x: use common board_video_skipEric Benard2014-04-15-58/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * | | | | | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-05-16-73/+461
| |\ \ \ \ \ \ \ | | |_|_|_|_|_|/ | |/| | | | | |
| | * | | | | | am335x: pepper: Add Gumstix Pepper AM335x-based machineAsh Charles2014-05-13-0/+336
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the Gumstix Pepper[1] single-board computer based on the TI AM335x processor. Schematics are available [2]. [1] https://store.gumstix.com/index.php/products/344/ [2] https://pubs.gumstix.com/boards/PEPPER/ Signed-off-by: Ash Charles <ash@gumstix.com> [trini: Move 'cdev' in board.c down to under #ifdef's where it's used] Signed-off-by: Tom Rini <trini@ti.com>
| | * | | | | | siemens:cosmetic, dxr2: rename dxr2 to dracoEgli, Samuel2014-05-13-38/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The actual board name is draco and dxr2 is the target name. In the future we'll have different targets based on draco board. All changes are purely non-functional and basically rename dxr2 to draco. One style fix in board.c that existed already before. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Reviewed-by: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| | * | | | | | siemens: add led cmd for flexible LED controlEgli, Samuel2014-05-13-6/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * remove setting LED in user button function. We want to decouple reading user button and setting LED. This two things need to be done independently. * led cmd can be used to control LEDs that are defined in board file having a led cmd, one can easily set LEDs in u-boot shell. For example bootcmd can be extended to disable status LED before loading kernel. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| | * | | | | | siemens: update DDR3 parameters for dxr2Egli, Samuel2014-05-13-23/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add parameters for factory and print them at start up to facilitate control of right DDR3 settings in EEPROM. * cosmetic changes in a couple of printfs Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| | * | | | | | siemens: cosmetic: remove unused and rename definesEgli, Samuel2014-05-13-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For dxr2 board DXR2_IOCTRL_VAL is set by data in EEPROM. In pxm2 board it does not make sense to have dxr2 as prefix. Replace it with more meaningful DDR prefix. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Pascal Bach <pascal.bach@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| | * | | | | | am33xx: add SSC enable macroYegor Yefremov2014-05-13-1/+1
| | | |_|/ / / | | |/| | | | | | | | | | | | | | | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
| * | | | | | Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD2014-05-15-398/+450
| |\ \ \ \ \ \
| | * | | | | | ARM: tegra: Venice2 pinmux spreadsheet updatesStephen Warren2014-05-13-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Venice2 pinmux spreadsheet was updated to fix a few issues. Import those changes into the U-Boot pinmux initialization tables. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| | * | | | | | ARM: tegra: update Venice2 pinmuxStephen Warren2014-05-13-316/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This re-imports the entire Venice2 pinmux data from the board's master spreadsheet, and makes use of the new IO clamping GPIO initialization table features. This makes the board port fully compliant with the required HW-defined pinmux initialization sequence. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| | * | | | | | ARM: tegra: clamp inputs on Jetson TK1Stephen Warren2014-05-13-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HW-defined procedure for booting Tegra requires that CLAMP_INPUTS_WHEN_TRISTATED be enabled before programming the pinmux. Modify the Jetson TK1 board to do this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| | * | | | | | ARM: tegra: make use of GPIO init table on Jetson TK1Stephen Warren2014-05-13-82/+178
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HW-defined procedure for booting Tegra requires that some pins be set up as GPIOs immediately at boot in order to avoid glitches on those pins, when the pinmux is programmed. This patch implements this procedure for Jetson TK1. For pins which are to be used as GPIOs, the pinmux mux function need not be programmed, so the pinmux table is also adjusted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | | | | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-05-15-243/+172
| |\ \ \ \ \ \
| | * | | | | | S5P: Exynos: Add GPIO pin numbering and rename definitionsAkshay Saraswat2014-05-13-173/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch includes following changes : * Adds gpio pin numbering support for EXYNOS SOCs. To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. * Rename GPIO definitions from GPIO_... to S5P_GPIO_... These changes were done to enable cmd_gpio for EXYNOS and cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence getting a error during compilation. * Adds support for name to gpio conversion in s5p_gpio to enable gpio command EXYNOS SoCs. Function has been added to asm/gpio.h to decode the input gpio name to gpio number. Example: SMDK5420 # gpio set gpa00 Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | | | | | samsung: misc: remove download mode info screenPrzemyslaw Marczak2014-05-07-42/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change removes LCD menu download mode info screen. Now key press timeout is checked in function download_menu() and menu options are displayed directly after PWR + VOLUP keys. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | | | | | samsung: misc: menu: increase delay in menu main loopPrzemyslaw Marczak2014-05-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase menu loop delay to 200 ms helps choose the right menu option by user. Before this, each time key was pressed the current menu option was changed few times. Now it changes only once and also changes few times if key is pressed for a longer time. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | | | | | samsung: misc: add env default option to lcd menuInha Song2014-05-07-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change allows reset device environment to default without using u-boot console, which is useful for system developers. Signed-off-by: Inha Song <ideal.song@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | | | | | samsung: misc: add gpt restore option to lcd menuPrzemyslaw Marczak2014-05-07-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This menu option allows restore gpt. This is usefull and no needs access to the u-boot console. For proper operation: - each partition uuid should be set in environment or - CONFIG_RANDOM_UUID should be defined for automatically uuid setting After operation success device is going to be reset. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | | | | | samsung: misc: allows using environmental macros as args in menu commandsPrzemyslaw Marczak2014-05-07-27/+22
| | | |_|/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function cmd_process() runs commands with directly given list of arguments but it doesn't expand given environmental variables names as macros. Command "gpt" as one of arguments expects expanded macro e.g. $partitions so it needs to be called by function run_command(). Changes: - extend array mode_name by lower case commands names - used by find_cmd() - put each command arguments into one string - used by run_command() - use run_command() instead of cmd_process() Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | | | | arm: move exception handling out of start.S filesAlbert ARIBAUD2014-05-15-0/+3
| | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Exception handling is basically identical for all ARM targets. Factorize it out of the various start.S files and into a single vectors.S file, and adjust linker scripts accordingly. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-05-22-75/+0
|\ \ \ \ \ \ | |_|_|_|/ / |/| | | | |
| * | | | | ums: move IO support code to common locationStephen Warren2014-05-08-56/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's nothing Samsung-/board-specfic about the implementation of ums_init(). Move the code into cmd_usb_mass_storage.c, so that it can be shared by any user of that command. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
| * | | | | ums: remove ums_disk_init()Stephen Warren2014-05-08-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that ums_disk_init() is so simple, there's no need for it to be a separate function. Instead, just add it to the tail end of ums_init(). Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
| * | | | | ums: remove error-checking of MMC device sizeStephen Warren2014-05-08-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no reason to believe that an MMC device will incorrectly report its capacity. Remove error checking of this value from ums_disk_init() to simplify it. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
| * | | | | ums: remove UMS_{NUM,START}_SECTORS + UMS_START_SECTORStephen Warren2014-05-08-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These values aren't set anywhere at present, and hence have no effect. The concept of a single global offset/number of sectors to expose through USB Mass Storage doesn't even make sense in the face of multiple storage devices. Remove these defines to simplify the code. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
| * | | | | ums: support block devices not MMC devicesStephen Warren2014-05-08-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB Mass Storage function could equally well support a SATA device as support an MMC device. Update struct ums to contain a block device descriptor, not an MMC device descriptor. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-05-16-16/+273
|\ \ \ \ \ \
| * | | | | | board/p1_p2_rdb:Enable p1_p2_rdb boot from NAND/SD/SPI in SPLPrabhakar Kushwaha2014-05-16-13/+267
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the earlier patches, the SPL/TPL fraamework was introduced. For SD/SPI flash booting way, we introduce the SPL to enable a loader stub. The SPL was loaded by the code from the internal on-chip ROM. The SPL initializes the DDR according to the SPD and loads the final uboot image into DDR, then jump to the DDR to begin execution. For NAND booting way, the nand SPL has size limitation on some board(e.g. P1010RDB), it can not be more than 4KB, we can call it "minimal SPL", So the dynamic DDR driver doesn't fit into this minimum SPL. We added the TPL that is loaded by the the minimal SPL. The TPL initializes the DDR according to the SPD and loads the final uboot image into DDR,then jump to the DDR to begin execution. This patch enabled SPL/TPL for P1_P2_RDB to support starting from NAND/SD/SPI flash with SPL framework and initializing the DDR according to SPD in the SPL/TPL. Because the minimal SPL load the TPL to L2 SRAM and the jump to the L2 SRAM to execute, so the section .resetvec is no longer needed. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | | powerpc/t104xrdb: Toggle deep sleep management signals after resumeTang Yuantian2014-05-16-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T104xrdb has several sleep management signals that are used for deep sleep. They are enabled by OS to enter deep sleep and should be disabled by u-boot when cores wake up. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | | board/freescale: Move CRC32 offset in NXID v1 data formatEbony Zhu2014-05-16-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to AN3638, CRC of NXID v1 is at the end of the 256-byte I2C memory. The wrong CRC32 offset prevents Uboot from reading system information from EEPROM. No NXID v0 is being used on Freescale boards. Signed-off-by: Ebony Zhu <b45385@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | | | | sandbox: set sandbox's vendor to nullMasahiro Yamada2014-05-16-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because sandbox is not a real hardware, setting vendor=sandbox is almost meaningless. This commit sets sandbox's vendor field to '-'. It is a good thing that it decreases one level directory hierarchy. The files board/sandbox/sandbox/* have been moved to board/sandbox/*. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | | | | | | Revert "sandbox: move source files from board/ to arch/sandbox/"Masahiro Yamada2014-05-16-0/+389
|/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 258060905e04fe2eb509756ef3b37e23e220a2d6. Conflicts: boards.cfg Wrong patch 25806090 was applied by accident. Revert it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-05-13-29/+1363
|\ \ \ \ \ \ | |_|_|_|_|/ |/| | | | |
| * | | | | powerpc/freescale: Change the return value of mac_read_from_eeprom()York Sun2014-05-13-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value has not been checked by its caller, until recent change of using generic board architecture. The error of this function is not critical enough to hang the system. Printing the warning message is enough to catch user's attention. U-boot should continue to boot to give user a chance to fix the EEPROM. Chaning the return value to 0 to avoid hanging in the board_init_r(). Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | | PPC 85xx QEMU: Always assume 1 coreAlexander Graf2014-05-13-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only need u-boot to bother about a single core in the QEMU machine. Everything that would require additional knowledge of more cores gets handled by QEMU and passed straight into the payload we execute. Because of this setup, it would be counterproductive to enable SMP support in u-boot. We would have to rip CPUs out of already existing spin tables and respin them from u-boot. It would be a pretty big mess. So only assume we have a single core. This fixes errors about CONFIG_MP being disabled. Signed-off-by: Alexander Graf <agraf@suse.de>
| * | | | | kmp204x: add workaround for A-004849Valentin Longchamp2014-05-13-6/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This should prevent the problems that the CCF can deadlock with certain traffic patterns. This also fixes the workaround for A-006559 that was not correctly implemented before. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
generated by cgit v1.1 at 2024-09-20 10:26:17 +0000