summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* Remove config.mk for da8xxevm based boards.Sughosh Ganu2010-10-26-43/+0
| | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
* Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated valueWolfgang Denk2010-10-26-2/+18
| | | | | | | | | | | | | | | | | | CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZEWolfgang Denk2010-10-26-2/+2
| | | | | | | | | | | | | | | | | | CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be some end address; to make the meaning more clear we rename it into CONFIG_SYS_INIT_RAM_SIZE No other code changes are performed in this patch, only minor editing of white space (due to the changed length) and the comments was done, where noticed. Note that the code for the PATI and cmi_mpc5xx board configurations looks seriously broken. Last known maintainers on Cc: Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-10-26-0/+1037
|\
| * ppc4xx: Add Io and IoCon 405EP board supportDirk Eibach2010-10-25-0/+1037
| | | | | | | | | | | | | | | | Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | hcu4, hcu5: fix out of tree buildingWolfgang Denk2010-10-24-18/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Out of tree building of the Netstal hcu4 and hcu5 boards failed like that: Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/hcu4/../common/fixed_sdram.o: No such file or directory Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/hcu4/../common/nm_bsp.o: No such file or directory make[1]: *** [/work/wd/tmp-ppc/board/netstal/hcu4/../common/fixed_sdram.o] Error 2 Adapt (and simplify) the respective Makefiles. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Niklaus Giger <niklaus.giger@netstal.com>
* | lite5200b_PM: fix compile warningWolfgang Denk2010-10-24-1/+1
|/ | | | | | | | | Fix warning: icecube.c: In function 'lite5200b_wakeup': icecube.c:83: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'void (*)(void)' Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'for-wd-master' of git://git.denx.de/u-boot-pxaWolfgang Denk2010-10-23-7848/+206
|\
| * PXA: Remove "xsengine" boardMarek Vasut2010-10-22-818/+0
| | | | | | | | | | | | This board is broken and it's not possible to repair it. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Remove "wepep250" boardMarek Vasut2010-10-22-698/+0
| | | | | | | | | | | | | | This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Remove "delta" boardMarek Vasut2010-10-22-1135/+0
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: xm250: Fix for relocMarek Vasut2010-10-22-573/+18
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: xaeniax: Fix for relocMarek Vasut2010-10-22-443/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: trizepsiv: Fix for relocMarek Vasut2010-10-22-552/+16
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: pxa255_idp: Fix for relocMarek Vasut2010-10-22-517/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: pleb2: Fix for relocMarek Vasut2010-10-22-508/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: palmtc: Fix for relocMarek Vasut2010-10-22-102/+16
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: palmld: Fix for relocMarek Vasut2010-10-22-111/+17
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: lubbock: Fix for relocMarek Vasut2010-10-22-431/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: innokom: Fix for relocMarek Vasut2010-10-22-470/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: csb226: Fix for relocMarek Vasut2010-10-22-469/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: cradle: Fix for relocMarek Vasut2010-10-22-539/+18
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: colibri_pxa270: Fix for relocMarek Vasut2010-10-22-49/+16
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: cerf250: Fix for relocMarek Vasut2010-10-22-433/+15
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-10-23-345/+682
|\ \
| * | XPedite5500 board supportJohn Schmoller2010-10-22-0/+476
| | | | | | | | | | | | | | | | | | | | | | | | | | | Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | xes: Make X-ES board names more genericPeter Tyser2010-10-22-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | xes: Add board_flash_wp_on()John Schmoller2010-10-22-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | xes: Consolidate checkboard()John Schmoller2010-10-22-66/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | xes: Use common PCI initialization codePeter Tyser2010-10-22-279/+49
| |/ | | | | | | | | | | | | | | Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2010-10-23-0/+68
|\ \
| * | MX51: Add video support to vision2 boardStefano Babic2010-10-22-0/+68
| |/ | | | | | | | | | | The patch adds support for LCD to the vision2 board. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2010-10-23-1/+3
|\ \
| * | sh: sh7785lcr: Add CONFIG_SYS_TEXT_BASE for 32bit modeNobuhiro Iwamatsu2010-10-21-1/+3
| |/ | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | a4m072: change 'display' command implementationIlya Yanok2010-10-21-39/+23
|/ | | | | | | | | | | | | | | | | | | | | | This patch changes implementation of 'display' command for a4m072 that uses 7-segment LED display as customer requested: a) The "display" command shall _not_ turn on the decimal point. b) Exception: "display ." shall turn on (only) the decimal point. c) Hex digits (0-9, A-F, a-f) shall be displayed as usual. d) Letters U, P, Y, L, S, T, H shall be displayed as usual (lower case letters identical to upper case letters) e) 'I' (and 'i') shall be displayed like '1' f) 'O' (and 'o') shall be displayed like '0' g) all other Characters shall be displayed like ' ' (all segments off). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-10-20-2/+4
|\
| * ppc4xx: Enable NOR flash support in sequoia_ramboot targetStefan Roese2010-10-20-2/+4
| | | | | | | | | | | | | | | | Until now, the Sequoia RAM-booting image disabled NOR flash support as this image was mainly created for NAND-only boards. This patch now enables NOR flash support for this RAM-booting version as well. Signed-off-by: Stefan Roese <sr@denx.de>
* | 86xx: Create common linker scriptKumar Gala2010-10-20-529/+0
| | | | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | tqm85xx: Update PCI codePeter Tyser2010-10-20-116/+49
| | | | | | | | | | | | | | | | Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: sr@denx.de Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | sbc8641d: Update PCI codePeter Tyser2010-10-20-79/+24
| | | | | | | | | | | | | | | | Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: joe.hamman@embeddedspecialties.com Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | mpc8641hpcn: Update PCI codePeter Tyser2010-10-20-75/+22
| | | | | | | | | | | | | | Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Adding fixed sdram setting for cornet_ds boardYork Sun2010-10-20-17/+488
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram setting. SPD based parameters and fixed parameters can be toggled by hwconfig. To use fixed parameters, hwconfig=fsl_ddr:sdram=fixed To use SPD parameters, hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/8xxx: Add fdt_fixup_phy_connection helperKumar Gala2010-10-20-15/+12
|/ | | | | | | Add a common helper that will set the PHY connection type based on enum. We use this on eTSEC, UCC, and will with Fman in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-20-460/+898
|\
| * update board EB+CPUx9K2Jens Scharsig2010-10-19-5/+3
| | | | | | | | | | | | | | * update to support arm reloaction * unnecessary environment variables removed Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
| * Build: PXA: Fix TrizepsIV build variantsMarek Vasut2010-10-19-1/+1
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * Build: PXA: Fix Vpac270 build variantsMarek Vasut2010-10-19-1/+1
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix Balloon3 for RelocMarek Vasut2010-10-19-100/+16
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix ZipitZ2 for RelocMarek Vasut2010-10-19-59/+16
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix vpac270 for RelocMarek Vasut2010-10-19-50/+10
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
generated by cgit v1.1 at 2024-12-01 19:19:46 +0000