summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-04-08-2/+39
|\
| * arm/integrator: Remove unneccessary CONFIG_PCI check.Detlev Zundel2010-04-04-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | pci_eth_init() is already conditional to CONFIG_PCI so not every caller needs to have conditionals. This is the only place in the current code base where such a check is still at the calling site. Signed-off-by: Detlev Zundel <dzu@denx.de> CC: Ben Warren <biggerbadderben@gmail.com> CC: Peter Pearse <peter.pearse@arm.com>
| * SAMSUNG: SMDKC100: Adds ethernet support.Naveen Krishna CH2010-04-03-0/+39
| | | | | | | | | | | | | | | | | | | | | | Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be loaded over tftp. The preinit function will configure GPIO (GPK0CON) & SROMC to look for environment in SROM Bank 3. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | nios2: Fix AMDLV065D flash write bug in altera board common tree.Scott McNutt2010-04-02-1/+1
| | | | | | | | Signed-off-by: Scott McNutt <smcnutt@psyent.com>
* | nios2: Fix outx/writex parameter order in io.hScott McNutt2010-04-02-24/+24
|/ | | | | | | | | The outx/writex macros were using writex(addr, val) rather than the standard writex(val, addr), resulting in incompatibilty with architecture independent components. This change set uses standard parameter order. Signed-off-by: Scott McNutt <smcnutt@psyent.com>
* Merge branch 'next'Wolfgang Denk2010-04-01-478/+908
|\
| * Merge remote branch 'origin/master' into nextWolfgang Denk2010-03-29-1434/+0
| |\
| * \ Merge branch 'next' of git://git.denx.de/u-boot-coldfire into nextWolfgang Denk2010-03-28-4/+905
| |\ \
| | * | ColdFire: Fix m54455EVB save environment bugTsiChung Liew2010-03-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATMEL flash does not have buffer write feature. Assgined buffer_size = 1, so that when there is a write to the flash will not use buffer write function. Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
| | * | ColdFire: M5271EVB DRAM Bring up issueTsiChung Liew2010-03-24-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix proper portsize: The register for portsize is either 00b, 01b, or 1xb. The value that previous assigned is 32d. Fix DRAM bring up: insert asm("nop") for every DRAM register setup Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
| | * | ColdFire: Correct bit definitionTsiChung Liew2010-03-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use correct definition for _MASK and _UNMASK. It was combined in the previous used and causes confusion. Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
| | * | add ASTRO MCF5373L boardWolfgang Wegner2010-03-24-0/+893
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ASTRO board(s) based on MCF5373L. Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
| * | | TI: Davinci: NAND Driver CleanupCyril Chemparathy2010-03-23-1/+1
| |/ / | | | | | | | | | | | | | | | | | | Modified to use IO accessor routines consistently. Eliminated volatile usage to keep checkpatch.pl happy. Signed-off-by: Cyril Chemparathy <cyril@ti.com>
| * | Merge remote branch 'origin/master' into nextWolfgang Denk2010-03-21-0/+0
| |\ \
| * | | mpc5xxx: Remove all references to MGT5100Detlev Zundel2010-03-21-473/+2
| | | | | | | | | | | | | | | | | | | | | | | | We do not support a processor that never reached a real customer. Signed-off-by: Detlev Zundel <dzu@denx.de>
* | | | mpc86xx: set the DDR BATs after calculating true DDR sizeTimur Tabi2010-03-30-0/+4
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After determining how much DDR is actually in the system, set DBAT0 and IBAT0 accordingly. This ensures that the CPU won't attempt to access (via speculation) addresses outside of actual memory. On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB and kept that way. If the system has less than 2GB of memory (typical for an MPC8610 HPCD), the CPU may attempt to access this memory during speculation. The zlib code is notorious for generating such memory reads, and indeed on the MPC8610, uncompressing the Linux kernel causes a machine check (without this patch). Currently we are limited to power of two sized DDR since we only use a single bat. If a non-power of two size is used that is less than CONFIG_MAX_MEM_MAPPED u-boot will crash. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | ml300: remove support for broken, orphaned boardWolfgang Denk2010-03-28-1434/+0
| |/ |/| | | | | | | | | | | | | The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Michal Simek <monstr@monstr.eu>
* | mod change 755 => 644 for multiple filesThomas Weber2010-03-21-0/+0
|/ | | | | | | | I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;' Signed-off-by: Thomas Weber <swirl@gmx.li> Add some more: neither Makefile nor config.mk need execute permissions. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Prepare v2010.03-rc1v2010.03-rc1Wolfgang Denk2010-03-12-6/+4
| | | | | | Coding style cleanup, update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.Detlev Zundel2010-03-12-642/+0
| | | | | | | | | This code has compile problems and the company does not even exist any more. So we take the liberty to drop support for it. Signed-off-by: Detlev Zundel <dzu@denx.de> CC: Wolfgang Denk <wd@denx.de> CC: Ben Warren <biggerbadderben@gmail.com>
* TQM8xx: add device tree support for TQM8xx based boards.Heiko Schocher2010-03-12-0/+119
| | | | | | | | | | | | | Also use hwconfig to configure whether the board has a FEC or not. We then can adjust the DTS to tell Linux if there is a FEC present. syntax: hwconfig=fec:on if hardware has a FEC hwconfig=fec:off if hardware has no FEC Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
* AT91: Update otc570 board to new SoC accessDaniel Gorsulowski2010-03-07-85/+95
| | | | | | | * convert otc570 board to use c stucture SoC access * change gpio access to at91_gpio syntax Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* arm: kirkwood: suen3: fixed build warningPrafulla Wadaskar2010-03-07-2/+1
| | | | | | | | This patch fixes following build warning Invalid Kwbimage command Type - valid names are: BOOT_FROM, NAND_ECC_MODE, NAND_PAGE_SIZE, SATA_PIO_MODE, DDR_INIT_DELAY, DATA, , spi, nand, sata, pex, uart Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* MX51: removed warnings for the mx51evkStefano Babic2010-03-07-10/+1
| | | | | | | | | | | The patch removes warnings at compile time and provides some cleanup code: - Removed comment on NAND (not yet supported) from lowlevel_init.S - Removed NFMS bit definition from imx-regs.h The bit is only related to MX.25/35 and can lead to confusion - Moved is_soc_rev() to soc specific code (removed from mx51evk.c) Signed-off-by: Stefano Babic <sbabic@denx.de>
* SPEAr : Supporting new mach ids for spear310 and spear320Vipin Kumar2010-03-07-2/+2
| | | | | | | | | Supporting new machine ids for SoCs spear310 and spear320 include/asm-arm/mach-types.h has to be updated before applying this patch for build to work Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
* arm, suen3: fix compile error, if doing not a local buildHeiko Schocher2010-03-07-0/+3
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* arm: add support for the suen3 board from keymileHeiko Schocher2010-03-07-2/+583
| | | | | | | | | | | | | Add support for the ARM part of the mgcoge2, named suen3. This board is based on the Marvell Kirkwood (88F6281) SoC. As there come more board variants, common config options are collected in include/configs/km_arm.h. Also, this board use common code for all keymile boards, which is stored in board/keymile/common/common.c Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Heiko Schocher <hs@denx.de>
* Add support for KARO TX25 boardJohn Rigby2010-03-07-0/+363
| | | | | | | | | | | | | | This is an i.MX25 base board with only NAND so it uses nand_spl to boot. Signed-off-by: John Rigby <jcrigby@gmail.com> Tune configuration, add support for (redundant) environment in NAND. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> CC: Fred Fan <fanyefeng@gmail.com> CC: Tom <Tom.Rix@windriver.com>
* Add initial support for Freescale mx51evk boardStefano Babic2010-03-07-0/+649
| | | | | | | | The patch adds initial support for the Freescale mx51evk board. Network (FEC) and SD controller (fsl_esdhc) are supported. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fred Fan <fanyefeng@gmail.com>
* edb93xx: Fix SDRAM initializationMatthias Kaehlcke2010-03-07-8/+31
| | | | | | | | | edb93xx: Fix SDRAM initialization by issuing a precharge all command before forcing the precharge and select mode register update mode before programming the mode registers. Write to the SDRAM banks in order to force a precharge, reading causes the edb93xx boards to hang Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
* ARM change name of defines for AT91 arm926ejsAchim Ehrlich2010-03-07-8/+8
| | | | | | | | | | Configuration defines should be preceeded with CONFIG_SYS_. Renamed some at91 specific defines to conform to this naming convention: AT91_CPU_NAME to CONFIG_SYS_AT91_CPU_NAME AT91_MAIN_CLOCK to CONFIG_SYS_AT91_MAIN_CLOCK Signed-off-by: Achim Ehrlich <aehrlich@taskit.de>
* VoiceBlue: fix linker errorsLadislav Michl2010-03-07-127/+65
| | | | | | | | | | | | | | | | | | linking eeprom with libgeneric.a is not really needed and causes following error: ../../lib_generic/libgeneric.a(string.o): In function `strcmp': /home/ladis/src/u-boot-ti/lib_generic/string.c:152: multiple definition of `strcmp' ../../examples/standalone/libstubs.a(stubs.o):include/_exports.h:24: first defined here make[1]: *** [eeprom.srec] Error 1 Fix undefined reference to memset generated by some versions of gcc to zero out initialized structure on the stack: eeprom.o: In function `eeprom': board/voiceblue/eeprom.c:152: undefined reference to `memset' make[1]: *** [eeprom] Error 1 Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* da830evm: Add support for TI EMACNick Thompson2010-03-07-2/+63
| | | | | | | | | | | Adds support for ethernet networking on the da830evm platform. This platform uses an SoC EMAC interface and a 3 port ethernet switch as a PHY with an RMII interface. The PHY also has a i2c interface for configuring the switch functions. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* NetStar: eeprom - fix linker errorLadislav Michl2010-03-07-93/+25
| | | | | | | | | | | | | | linking eeprom with libgeneric.a is not really needed and causes following error: ../../lib_generic/libgeneric.a(string.o): In function `strcmp': lib_generic/string.c:152: multiple definition of `strcmp' ../../examples/standalone/libstubs.a(stubs.o):include/_exports.h:24: first defined here Remove eeprom linker script as well and generate entry point object (to start application by jumping on its beginning) on the fly. Out-of-tree build tested as well. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* NetStar: eeprom - be less verboseLadislav Michl2010-03-07-14/+13
| | | | | | | | Use shorter yet descriptive messages, replace printf() with puts() where appropriate. This saves few bytes. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* NetStar: eeprom - undefined reference to `memset'Ladislav Michl2010-03-07-31/+37
| | | | | | | | | | | Defining partially initialized struct eth_device on stack means gcc has to zero out it, and some gcc versions optimize this with an implicit call to memset. Move definition to data section to avoid that (it has also nice side effect that we need not to pass it to helper functions anymore) Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* new board (eb_cpux9k2)Jens Scharsig2010-02-12-0/+438
| | | | | | | | | | * new board (eb_cpux9k2) * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG * select via make eb_cpux9k2_config * this also demonstrates, how to use boards with AT91RM9200 cpu in at91 arch tree Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
* update at91sam9263ek board to new SoC accessJens Scharsig2010-02-12-84/+88
| | | | | | | * convert at91sam9263ek board to use c stucture SoC access * change gpio access to at91_gpio syntax Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
* DA830 EVM: Enable NAND support on Spectrum Digital EVMNick Thompson2010-02-12-0/+37
| | | | | | | | | | | | The EVM UI extender card has a NAND device. This change will enable saveenv to work with NAND and Linux to be booted using: mtdparts default nboot kernel bootm Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* edb93xx: enable the uart in devicecfg registerAlessandro Rubini2010-02-12-0/+6
| | | | | | | printf goes to uart1, but it will block forever waiting for busy to go off unless the uart is enabled first. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
* edb93xx: change calculation un early_udelay.hAlessandro Rubini2010-02-12-1/+1
| | | | | | | | | | | | Previous code compiled with gcc-4.2.2 makes a call to __aeabi_uidiv to divide by 20. As a side effect it was not inline any more, and so sdram_cfg used the stack as well, but this is early code that has no stack yet. The patch explicitly removes the division, so no stack is used. The calculation of the counter calls a division by 20 Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
* Add support for EDB93xx boardsMatthias Kaehlcke2010-02-12-0/+656
| | | | | | | | | | | | | | | Added support for the following EDB93xx boards: EDB9301 EDB9302 EDB9302A EDB9307 EDB9307A EDB93012 EDB9315 EDB9315A Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
* NetStar: Remove debug junk leaked into eeprom utilityLadislav Michl2010-02-12-172/+2
| | | | | | | This patch removes debug junk leaked into eeprom utility. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* NetStar: make crcit utility more readableLadislav Michl2010-02-12-4/+5
| | | | | | | This patch makes the crcit utility more readable Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Overo GPMC registersScott Ellis2010-02-12-7/+16
| | | | | | | | | Use appropriate GPMC timings for the LAN9221 controller on the Gumstix Overo expansion boards not the values in arch-omap3/mem.h which are for a different ethernet controller. Signed-off-by: Scott Ellis <scott@jumpnowtek.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* da830evm: Use table driven pin mux configurationNick Thompson2010-02-12-18/+17
| | | | | | | | Tidyup the pin muxer configuration using the Davinci table driven pinmux configuration function and data tables. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* at91: Add esd gmbh OTC570 board supportDaniel Gorsulowski2010-02-12-0/+458
| | | | | | | This patch adds support for esd gmbh OTC570 board. The OTC570 is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-02-03-0/+28
|\
| * ppc4xx: Fix building for PLU405 boardsMatthias Fuchs2010-02-03-0/+28
| | | | | | | | | | | | | | | | The init_coupler() function from board/esd/plu405/plu405.c got lost somehow! This patch readds it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2010-02-03-1/+111
|\ \
generated by cgit v1.1 at 2024-12-19 00:14:19 +0000