summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* * Patch by Andre Schwarz, 24 Nov 2003:wdenk2003-12-07-1/+1037
| | | | | | | | | | add support for mvblue (mvBlueLYNX and mvBlueBOX) boards * Patch by Pavel Bartusek, 21 Nov 2003: set ZMII bridge speed on 440 * Patch by Anders Larsen, 17 Nov 2003: Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
* * Patches by David Müller, 14 Nov 2003:wdenk2003-12-07-110/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - board/mpl/common/common_util.c * implement support for BZIP2 compressed images * various cleanups (printf -> puts, ...) - board/mpl/common/flash.c * report correct errors to upper layers * check the erase fail and VPP low bits in status reg - board/mpl/vcma9/cmd_vcma9.c - board/mpl/vcma9/flash.c * various cleanups (printf -> puts, ...) - common/cmd_usb.c * fix typo in comment - cpu/arm920t/usb_ohci.c * support for S3C2410 is missing in #if line - drivers/cs8900.c * reinit some registers in case of error (cable missing, ...) - fs/fat/fat.c * support for USB/MMC devices is missing in #if line - include/configs/MIP405.h - include/configs/PIP405.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support - include/configs/VCMA9.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support * enable USB support - lib_arm/armlinux.c * change calling convention of ARM Linux kernel as described on http://www.arm.linux.org.uk/developer/booting.php * Patch by Thomas Lange, 14 Nov 2003: Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to support all these AMD boards. * Patch by Thomas Lange, 14 Nov 2003: Workaround for mips au1x00 physical memory accesses (the au1x00 uses a 36 bit bus internally and cannot access physical memory directly. Use the uncached SDRAM address instead of the physical one.)
* * Patch by Xue Ligong (Joe), 13 Nov 2003:wdenk2003-12-07-28/+29
| | | | | | | | | | add Realtek 8019 ethernet driver * Patch by Yuli Barcohen, 13 Nov 2003: MPC826xADS/PQ2FADS cleanup * Patch by Anders Larsen, 12 Nov 2003: Update README to mark the PORTIO commands non-standard
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-06-20/+53
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* Accelerate booting on TRAB board: read and check autoupdate imagewdenk2003-12-06-16/+47
| | | | headers first instead of always reading the whole images.
* Add support for BMS2003 boardwdenk2003-11-25-1/+1
| | | | | (featuring a NEC NL6448BC33-54. 10.4", 640x480 TFT display). Fix NEC display names (it's 6440 [for 640x480], not 6640).
* Fix flash driver for TRAB board (must use Unlock Bypass Reset commandwdenk2003-11-17-22/+34
| | | | to exit Unlock Bypass Mode); adjust timings for flash, SRAM and CPLD
* * Use "-fPIC" instead of "-mrelocatable" to prevent problems withwdenk2003-11-17-2/+2
| | | | | | | | | | | | | recent tools * Add checksum verification to 'imls' command * Add bd_info fields needed for 4xx Linux I2C driver * Patch by Martin Krause, 4 Nov. 2003: Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) * Print used network interface when CONFIG_NET_MULTI is set
* * Patch by Bernhard Kuhn, 28 Oct 2003:wdenk2003-11-07-3/+16
| | | | | | | | Add low boot support for MPC5200 * Fix problem with dual PCMCIA support (NSCU) * Fix MPC5200 I2C initialization function
* * Fix parameter passing to standalone images with bootm commandwdenk2003-10-30-0/+4
| | | | | | | | | | * Patch by Kyle Harris, 30 Oct 2003: Fix build errors for ixdp425 board * Patch by David M. Horn, 29 Oct 2003: Fixes to build under CYGWIN * Get IceCube MGT5100 working (again)
* * Prepare for releasewdenk2003-10-29-69/+163
| | | | | | | | | * Fix problems in memory test on some boards (which was not non-destructive as intended) * Patch by Gary Jennejohn, 28 Oct 2003: Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack to prevent stack overflow on ARM systems
* * Patch by Xiao Xianghua, 23 Oct 2003:wdenk2003-10-26-16/+16
| | | | | | | | small patch for mpc85xx * Fix small problem in MPC5200 I2C driver * Fix FCC3 support on ATC board
* Fix PCI problems on PPChameleon boardwdenk2003-10-22-1/+1
|
* * Fix PCI problems on PPChameleonEVBwdenk2003-10-19-1/+2
| | | | * TRAB auto-update: image type patch by Martin Krause, 17 Oct 2003
* TRAB auto-update: Base decision if we have to strip the imagewdenk2003-10-16-6/+6
| | | | header on image type as encoded in the header
* * Patches by Xianghua Xiao, 15 Oct 2003:wdenk2003-10-15-414/+2997
| | | | | | | | - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
* * Make sure HUSH is initialized for running auto-update scriptswdenk2003-10-14-2/+619
| | | | | | | | | | | * Make 5200 reset command _really_ reset the board, without running any other code after it * Fix flash mapping and display on P3G4 board * Patch by Kyle Harris, 15 Jul 2003: - add support for Intel IXP425 CPU - add support for IXDP425 eval board
* * Patch by Steven Scholz, 10 Oct 2003wdenk2003-10-09-0/+465
| | | | | | | | | | - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32)
* * Patches by Thomas Lange, 09 Oct 2003:wdenk2003-10-09-0/+1441
| | | | | | | | | | - fix cmd_ide.c for non ppc boards (read/write functions did not add ATA base address) - fix for shannon board - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code * Patch by Sangmoon Kim, 07 Oct 2003: add support for debris board
* * Patch by Martin Krause, 09 Oct 2003:wdenk2003-10-09-1078/+1413
| | | | | | | | | | | | | Fixes for TRAB board - /board/trab/rs485.c: correct baudrate - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in udelay(); fix some timing problems with adc controller - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power; modify commands: touch and buzzer * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE (quick & dirty workaround for rogue pointer problem in get_vfatname()); Use direct function calls for auto_update instead of hush commands
* * Patch by Scott McNutt, 04 Oct 2003:wdenk2003-10-08-4/+572
| | | | | | | | | | | | | | | | | | - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
* * Patch by Yuli Barcohen, 25 Sep 2003:wdenk2003-10-08-0/+1326
| | | | | | | | add support for Zephyr Engineering ZPC.1900 board * Patch by Anders Larsen, 23 Sep 2003: add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only implemented for the x86 architecture)
* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.wdenk2003-10-07-5/+13
|
* * Update TRAB auto update codewdenk2003-10-06-19/+33
| | | | | | | | | | | * Make fatload set filesize environment variable fix potential buffer overlow problem * enable basic / medium / high-end configurations for PPChameleonEVB board; fix NAND code * enable TFTP client code to specify to the server the desired timeout value (see RFC-2349)
* Improve SDRAM setup for TRAB boarddzu2003-09-30-4/+4
|
* * Adapt TRAB configuration and auto_update to new memory layoutdzu2003-09-29-10/+13
|
* "start" may be legitimately 0x0000wdenk2003-09-19-8/+12
|
* Work on TRAB's auto_update feature.wdenk2003-09-18-40/+108
| | | | Cleanup for submitted patches.
* * Patch by Rune Torgersen, 17 Sep 2003:wdenk2003-09-18-2/+12
| | | | | - Fixes for MPC8266 default config - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
* * Patches by Anders Larsen, 17 Sep 2003:wdenk2003-09-18-20/+20
| | | | | | | | | | - fix spelling errors - set GD_FLG_DEVINIT flag only after device function pointers are valid - Allow CFG_ALT_MEMTEST on systems where address zero isn't writeable - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs - trigger watchdog while waiting in serial driver
* Support new configuration of TRAB board with more memorywdenk2003-09-17-46/+177
| | | | Minor cleanup of comments
* Add auto-update code for TRAB board using USB memory stickswdenk2003-09-17-9/+429
|
* Code cleanupwdenk2003-09-16-1/+3
|
* * Patches by Jon Diekema, 15 Sep 2003:wdenk2003-09-15-16/+76
| | | | | | | | | | | | | | | | | | | | | | | - add description for missing CFG_CMD_* entries in the README file - sacsng tweaks: include/configs/sacsng.h: + Support extra bootp options like: 2nd DNS and send hostname + Enabling ping and irq command + Adding defines for a bunch of misc configrabled options (patches for these options will be coming) + Adding watchdog support, but it isn't enabled yet. board/sacsng/sacsng.c: + Suppressing unneeded output when the quiet environment is non-zero. + show_boot_progress() now accepts any negative number as a failure code. + show_boot_progress() flashes the error code 5 times, and then resets the board to retry the boot from the top * Patch by Gleb Natapov, 14 Sep 2003: enable watchdog support for all MPC824x boards that have a watchdog
* * Patch by David Müller, 13 Sep 2003:wdenk2003-09-13-63/+209
| | | | | | various changes to VCMA9 board specific files * Add I2C support for MGT5100 / MPC5200
* * Patch by Rune Torgersen, 11 Sep 2003:wdenk2003-09-12-1/+1
| | | | | | | | | Changed default memory option on MPC8266ADS to NOT be Page Based Interleave, since this doesn't work very well with the standard 16MB DIMM * Patch by George G. Davis, 12 Sep 2003: fix Makefile settings for sk98 driver
* Move TRAB burn-in tests to TRAB board directorywdenk2003-09-12-18/+1369
|
* PMC405 update.stroese2003-09-12-104/+1361
|
* PCI405 update.stroese2003-09-12-746/+751
|
* CPCI405(AB) update.stroese2003-09-12-1093/+1437
|
* ASH405 update.stroese2003-09-12-2466/+2497
|
* Xilinx jtag tool added.stroese2003-09-12-0/+2402
|
* Board VOH405 added.stroese2003-09-12-0/+1776
|
* Board PLU405 added.stroese2003-09-12-0/+1752
|
* Board HUB405 added.stroese2003-09-12-0/+488
|
* Board DP405 added.stroese2003-09-12-0/+2279
|
* * Patch by Martin Krause, 11 Sep 2003:wdenk2003-09-11-1/+1841
| | | | | | add burn-in tests for TRAB board * Enable instruction cache on MPC5200 board
* * Patch by Gary Jennejohn, 11 Sep 2003:wdenk2003-09-11-28/+30
| | | | | | | | | | | - allow for longer timeouts for USB mass storage devices * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. * Change output format for NAND flash - make it look like for other memory, too
* * Patches by Denis Peter, 9 Sep 2003:wdenk2003-09-10-361/+476
| | | | | | | | | | | | | | | | | | | | | | | | | | | | add FAT support for IDE, SCSI and USB * Patches by Gleb Natapov, 2 Sep 2003: - cleanup of POST code for unsupported architectures - MPC824x locks way0 of data cache for use as initial RAM; this patch unlocks it after relocation to RAM and invalidates the locked entries. * Patch by Gleb Natapov, 30 Aug 2003: new I2C driver for mpc107 bridge. Now works from flash. * Patch by Dave Ellis, 11 Aug 2003: - JFFS2: fix typo in common/cmd_jffs2.c - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option - JFFS2: remove node version 0 warning - JFFS2: accept JFFS2 PADDING nodes - SXNI855T: add AM29LV800 support - SXNI855T: move environment from EEPROM to flash - SXNI855T: boot from JFFS2 in NOR or NAND flash * Patch by Bill Hargen, 11 Aug 2003: fixes for I2C on MPC8240 - fix i2c_write routine - fix iprobe command - eliminates use of global variables, plus dead code, cleanup.
* * Add support for USB Mass Storage Devices (BBB)wdenk2003-09-10-0/+6
| | | | | | (tested with USB memory sticks only) * Avoid flicker on TRAB's VFD
generated by cgit v1.1 at 2024-12-20 06:55:03 +0000