summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* 83xx: initialize serdes for MPC837XRDB boardsAnton Vorontsov2008-03-25-0/+37
| | | | | | | | On the MPC8377ERDB: 2 SATA and 2 PCI-E. On the MPC8378ERDB: 2 PCI-E On the MPC8379ERDB: 4 SATA Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* 83xx: Add Vitesse VSC7385 firmware uploadingTimur Tabi2008-03-25-6/+57
| | | | | | | | | | Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. Cleaned up the board header files to make selecting the VSC7385 easier to control. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk2008-03-26-1/+28
|\
| * [MIPS] Introduce _machine_restartShinya Kuribayashi2008-03-25-1/+22
| | | | | | | | | | | | Handles machine specific functions by using weak functions. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
| * [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()Shinya Kuribayashi2008-03-25-0/+6
| | | | | | | | | | | | Move things to appropriate place. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* | FSL: Move board/mpc8266ads under board/freescaleJon Loeliger2008-03-25-0/+0
| | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | FSL: Move board/mpc7448hpc2 under board/freescaleJon Loeliger2008-03-25-0/+0
| | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | FSL: Move board/mpc8260ads under board/freescaleJon Loeliger2008-03-25-0/+0
| | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | net/Blackfin: move on-chip MAC driver into drivers/net/Mike Frysinger2008-03-25-621/+1
| | | | | | | | | | | | | | | | The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board directory, but it is not board specific, so relocate it to the drivers dir so that other Blackfin ports can utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | 8xx : Add OF support to Adder875 board port - resubmitBryan O'Donoghue2008-03-25-0/+11
|/ | | | Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
* LWMON5: POST RTC fixYuri Tikhonov2008-03-20-5/+11
| | | | | | | | | | | | | | | | | Modify the RTC API to provide one a status for the time reported by the rtc_get() function: 0 - a reliable time is guaranteed, < 0 - a reliable time isn't guaranteed (power fault, clock issues, and so on). The RTC chip drivers are responsible for providing this info if the corresponding chip supports such functionality. If not - always report that the time is reliable. The POST RTC test was modified to detect the RTC faults utilizing this new rtc_get() feature. Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* Fix backlight in the lwmon5 POST.Yuri Tikhonov2008-03-18-3/+21
| | | | | | | Backlight was switched on even when temperature was too low. Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* Add support for the lwmon5 board reset via GPIO58.Yuri Tikhonov2008-03-18-0/+5
| | | | | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* The patch adds new POST tests for the Lwmon5 board. These are:Yuri Tikhonov2008-03-18-0/+19
| | | | | | | | | | | * External Watchdog test; * dsPIC tests; * FPGA test; * GDC test; * Sysmon tests. Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-blackfinWolfgang Denk2008-03-18-597/+1
|\
| * Blackfin: BF537-stamp: drop board-specific flash driver for CFIMike Frysinger2008-03-15-527/+1
| | | | | | | | | | | | | | The parallel flash on the BF537-STAMP is CFI compliant, so there is no need for the board specific driver at all. Just use the common CFI driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPUMike Frysinger2008-03-15-25/+0
| | | | | | | | | | | | | | | | Stop tying things to the processor that should be tied to other defines and change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build system to select the -mcpu option. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: move bootldr command to common codeMike Frysinger2008-03-15-45/+0
| | | | | | | | | | | | | | | | This moves the Blackfin-common bootldr command out of the BF537-STAMP specific board directory and into the common directory so that all Blackfin boards may utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | HMI1001: fix compile problem.Wolfgang Denk2008-03-18-1/+3
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Conding style cleanupWolfgang Denk2008-03-16-7/+0
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval boardStefan Roese2008-03-15-0/+17
| | | | | | | | | | | | | | This patch adds USB OHCI support to the Canyonlands board port. It also enables EXT2 support. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Add Canyonlands NAND booting supportStefan Roese2008-03-15-17/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 460EX doesn't support a fixed bootstrap option to boot from 512 byte page NAND devices. The only bootstrap option for NAND booting is option F for 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap EEPROM needs to be programmed accordingly. This patch adds basic NAND booting support for the AMCC Canyonlands aval board and also adds support to the "bootstrap" command, to enable NAND booting I2C setting. Tested with 512 byte page NAND device (32MByte) on Canyonlands. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)Stefan Roese2008-03-15-0/+915
| | | | | | | | | | | | | | This patch adds support for the AMCC Canyonlands 460EX evaluation board. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: program_tlb now uses 64bit physical addessStefan Roese2008-03-15-2/+0
| | | | | | | | | | | | | | | | This patch changes the physical addess parameter from 32bit to 64bit. This is needed for 36bit 4xx platforms to access areas located beyond the 4GB border, like SoC peripherals (EBC etc.). Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Add 405GPr based MCU25 board specific filesNiklaus Giger2008-03-15-0/+499
| | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | ppc4xx: HCU4/5. remove obsolete hcu_flash.cNiklaus Giger2008-03-15-514/+0
| | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | ppc4xx: HCU4/5. Use FLASH_CFI_LEGACYNiklaus Giger2008-03-15-2/+34
| | | | | | | | | | | | | | Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with the FLASH_CFI_LEGACY et al. config options. Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | ppc4xx: Fix comment in 405EX DDR2 init codeStefan Roese2008-03-15-4/+4
|/ | | | Signed-off-by: Stefan Roese <sr@denx.de>
* HMI1001: add support for MPC5200 Rev. B processors.Wolfgang Denk2008-03-13-0/+18
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* TQM5200: remove dead codeWolfgang Denk2008-03-13-56/+0
| | | | | | This board never used a MGT5100 processor. Signed-off-by: Wolfgang Denk <wd@denx.de>
* SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warningsJean-Christophe PLAGNIOL-VILLARD2008-03-09-17/+19
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* scb9328: Fix flash warning: type qualifiers ignored on function return typeJean-Christophe PLAGNIOL-VILLARD2008-03-09-1/+4
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* esd/common/fpga.c: fix indentation.Wolfgang Denk2008-03-09-177/+167
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* esd/common/fpga.c: fix 'assignment of read-only location' errorWolfgang Denk2008-03-09-3/+4
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* m501sk: Fix out of tree buildingWolfgang Denk2008-03-09-5/+9
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from ↵Jean-Christophe PLAGNIOL-VILLARD2008-03-08-1/+1
| | | | | | pointer target type Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-03-08-1/+1
|\
| * fix taihu soft spi_readMarkus Brunner2008-03-07-1/+1
| | | | | | | | | | | | | | The taihu board used gpio_read_out_bit which reads the output register and not the pin state. Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
* | mgsuvd: update board configurationHeiko Schocher2008-03-08-6/+17
| | | | | | | | | | | | initialize the UPIOx controller. Signed-off-by: Heiko Schocher <hs@denx.de>
* | mgcoge: update board configurationHeiko Schocher2008-03-08-5/+20
|/ | | | | | | add support for the config Flash. initialize the UPIOx controller. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-03-05-105/+23
|\
| * Remove erroneous or extra spd.h #includers.Jon Loeliger2008-03-05-105/+23
| | | | | | | | | | | | | | | | | | | | Many of the spd.h #includers don't need it, and wanted to have spd_sdram() declared instead. Since they didn't get that, some also had open coded extern declarations of it instead or as well. Fix it all up by using spd_sdram.h where needed. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | W7OLMC/W7OLMG: fix build problems (redundant #define)Wolfgang Denk2008-03-04-3/+0
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2008-03-02-2/+4
|\
| * sbc8548: Fix Revision reading and unused variable 'path'Jean-Christophe PLAGNIOL-VILLARD2008-02-27-2/+4
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | MPC5121e ADS PCI support take 3John Rigby2008-03-02-1/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds PCI support for MPC5121 Tested with drivers/net/rtl8139.c Support is conditional since PCI on old silicon does not work. ads5121_PCI_config turns on PCI In this version, condition compilation of PCI code has been moved from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as suggested by Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: John Rigby <jrigby@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk2008-03-02-2/+4
|\ \
| * | 86xx: Fix renamed GUR symbols in sbc8641d board.Jon Loeliger2008-02-25-2/+4
| |/ | | | | | | | | | | | | | | | | Back in commit a551cee99ad1d1da20fd23ad265de47448852f56 (86xx: Fix GUR PCI config registers properly), we should have changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL symbols in the sbc8641d board as well. Fix this oversight. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | TQM5200: use automatic fdt memory fixup (part 2)Martin Krause2008-03-02-0/+4
| | | | | | | | | | | | | | | | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, TB5200 and TB5200_B to fixup the /memory node with the memory values detected by U-Boot. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-03-02-0/+2
|\ \
generated by cgit v1.1 at 2024-12-27 02:38:10 +0000