summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* 85xx: Report which "bank" of NOR flash we are booting from on FSL boardsKumar Gala2009-07-22-14/+90
| | | | | | | | | | | | | | The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of swizzling the upper address bits of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCNKumar Gala2009-07-22-4/+14
| | | | | | | | | | | | | | The MPC8641HPCN board is capable of swizzling the upper address bit of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: updates for the keymile boardsHeiko Schocher2009-07-21-36/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - CONFIG_SYS_MAX_I2C_BUS changed to 1 We use only one I2C hardwarecontroller on this boards, so change the CONFIG_SYS_MAX_I2C_BUS to 1. - common: dont print errormsg if second IVM Block lacks. - 82xx, mgcoge: fix double mtdpart entry in environment - 82xx, mgcoge: activate on second Flash the second bank. - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards - common: Change malloc size to 1MByte for all Keymile boards We need a bigger malloc area for the environment support (128k) on some Keymile boards (kmeter1) and the upcoming UBI support. Change it to 1MB for all Keymile boards to be on the save side. Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for UBI/UBIFS support. - Add UBI support to all Keymile boards - change manner of writing "/localbus/ranges" node instead of writting the complete "/localbus/ranges" node before booting Linux, only update the ranges entries which gets dynamical detected (size of flashes). This is needed, because keymile adds in the DTS "/localbus/ranges" node entries, which u-boot must not overwrite/delete. - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips The Intel P30 chip has 2 non-identical chips on one die, so we need to define 2 seperate regions that are scanned by physmap_of independantly. - kmeter1: Add MTD concat support to Keymile boards - 82xx, mgcoge: add "unlock=yes" to default environment - added CONFIG_MTD_DEVICE to get in sync with mainline code Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-07-20-1232/+300
|\
| * mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCIKim Phillips2009-07-18-1232/+300
| | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Fix boards broken after removal of legacy NAND and DoC supportWolfgang Denk2009-07-19-0/+6
|/ | | | | | | | Commit 2419169f removed support for legacy NAND and disk on chip but missed to update the code for a few boards. This patch fixes the resulting build issues. Signed-off-by: Wolfgang Denk <wd@denx.de>
* PATI board: fix compiler warningsWolfgang Denk2009-07-19-6/+10
| | | | | | | | | | | | Fix these: pati.c: In function 'checkboard': pati.c:358: warning: pointer targets in passing argument 2 of 'getenv_r' differ in signedness ../common/flash.c: In function 'write_word': ../common/flash.c:824: warning: dereferencing type-punned pointer will break strict-aliasing rules cmd_pati.c: In function 'do_pati': cmd_pati.c:279: warning: 'value' may be used uninitialized in this function Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpl: printing current stdio devices cleanupJean-Christophe PLAGNIOL-VILLARD2009-07-19-34/+6
| | | | | | | | | | | | Currently the mpl boards duplicate the code to print the current devices from common/console.c; use stdio_print_current_devices() instead Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-07-19-190/+0
|\
| * Remove legacy NAND and disk on chip references from boards.Scott Wood2009-07-17-190/+0
| | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* | ARM: make split_by_variant.sh output more usefulWolfgang Denk2009-07-18-2/+2
| | | | | | | | | | | | | | | | | | The board/armltd/integrator/split_by_variant.sh script used to print "Configuring for integrator*p board..." no matter which board name was being compiled. This made it difficult to match MAKEALL output to board names. This patch fixes this. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MIP405T: fix compile problemWolfgang Denk2009-07-18-1/+1
| | | | | | | | | | | | | | The "stdio/device: rework function naming convention" patch (commit 52cb4d4f) broke the MIP405T board; this patch fixes it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | CPCI750: fix compile problemWolfgang Denk2009-07-18-1/+1
| | | | | | | | | | | | | | Commit bc0d3296 removed ppc_error_no.h from Marvell boards but forgot to update board/esd/cpci750/mv_eth.h Signed-off-by: Wolfgang Denk <wd@denx.de>
* | stdio/device: rework function naming conventionJean-Christophe PLAGNIOL-VILLARD2009-07-18-34/+34
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc83xx: MPC837xEMDS: Use hwconfig instead of pci_external_arbiter variableAnton Vorontsov2009-07-16-2/+1
| | | | | | | | Since we have simple hwconfig interface now, we don't need pci_external_arbiter variable any longer. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: MPC8315ERDB: Use hwconfig for board type selectionAnton Vorontsov2009-07-16-9/+5
| | | | | | | This patch simply converts the board to the hwconfig infrastructure. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device treeAnton Vorontsov2009-07-16-13/+24
| | | | | | | | | | | fdt_fixup_esdhc() will either disable or enable eSDHC nodes, and also will fixup clock-frequency property. Plus, since DR USB and eSDHC are mutually exclusive, we should only configure the eSDHC if asked through hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: MPC837XERDB: Add support for FSL eSDHCAnton Vorontsov2009-07-16-0/+18
| | | | | | | | | | | | | | | | | | This patch adds support for eSDHC on MPC837XERDB boards. The WP switch doesn't seem to work on RDB boards though, the WP pin is always asserted (can see the pin state when it's in GPIO mode). FSL DR USB and FSL eSDHC are mutually exclusive because of pins multiplexing, so user should specify 'esdhc' or 'dr_usb' options in the hwconfig environment variable to choose between the devices. p.s. Now we're very close to a monitor len limit (196 bytes left using gcc-4.2.0), so also increase the monitor len by one sector (64 KB). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'asm-generic' of git://git.denx.de/u-boot-microblazeWolfgang Denk2009-07-16-168/+3
|\
| * asm-generic: Consolidate errno.h to asm-generic/errno.hMichal Simek2009-07-09-168/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch use blackfin errno.h implementation which correspond Linux kernel one. MIPS implemetation is different that's why I keep it. I removed ppc_error_no.h from Marvell boards which was the same too. I have got ack from ppc40x, blackfin, arm, coldfire and avr custodians. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
* | aria: enable NAND flash supportWolfgang Denk2009-07-14-0/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MPC512x: factor out common codeWolfgang Denk2009-07-14-334/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have 3 boards for the MPC512x it turns out that they all use the very same fixed_sdram() code. This patch factors out this common code into cpu/mpc512x/fixed_sdram.c and adds a new header file, include/asm-ppc/mpc512x.h, with some macros, inline functions and prototype definitions specific to MPC512x systems. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* | mecp5123: fix build errorWolfgang Denk2009-07-14-8/+5
| | | | | | | | | | | | | | | | | | | | The mecp5123 board did not compile because the MSCAN Clock Control Registers were missing; these got added, but as an array instead of 4 individual registers. Adapt the code so it builds. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* | Merge branch 'master' of /home/wd/git/u-boot/masterWolfgang Denk2009-07-14-1937/+976
|\ \
| * \ Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-13-566/+503
| |\ \
| | * | versatile: update config and merge to cfi flash driverJean-Christophe PLAGNIOL-VILLARD2009-07-12-515/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Peter Pearse <peter.pearse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com>
| | * | at91: Introduction of at91sam9g10 SOC.Sedji Gaouaou2009-07-12-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| | * | at91: Introduction of at91sam9g45 SOC.Sedji Gaouaou2009-07-12-0/+431
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| | * | OMAP3 pandora: Fix CKE1 MUX setting to allow self-refreshGrazvydas Ignotas2009-07-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pandora is using both SDRC CSes. The MUX setting is needed for the second CS clock signal to allow the 2 RAM parts to be put in self-refresh correctly. Based on similar patch for beagle and overo by Jean Pihet and Steve Sakoman.
| | * | OMAP3 pandora: setup pulls for various GPIOsGrazvydas Ignotas2009-07-12-25/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Set pullups or pulldowns for GPIOs which need them. Disable them for others, which have external pulls. Also make disabled pull setting consistent (some pins had type set to "up" even if pull type selection was disabled).
| | * | OMAP3 pandora: setup pin mux for pins used on rev3 boardsGrazvydas Ignotas2009-07-12-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup pin mux for GPIO pins connected on rev3 or later boards. Also change NUB2 IRQ pin. This should not affect older boards because they don't have any nubs (analog controllers) attached to them.
| | * | OMAP3 pandora: pin mux cleanupGrazvydas Ignotas2009-07-12-25/+0
| | |/ | | | | | | | | | | | | Remove configuration of not unused pins, effectively leaving them in safe mode.
| * | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2009-07-13-1371/+473
| |\ \
| | * | sh: Add support ESPT-GIGA boradNobuhiro Iwamatsu2009-07-11-0/+443
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ESPT-Giga is SH7763-based reference board. Board support is relatively sparse, presently supporting serial, gigabit ethernet, USB host, and MTD. More information (in Japanese) available at: http://www.cente.jp/product/cente_hard/ESPT-Giga.html Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | sh: Revised the build with newest compilerNobuhiro Iwamatsu2009-07-08-29/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The check of data became severe from newest gcc. This patch checked in gcc-4.2 and 4.3 . Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | sh: unify linker scriptJean-Christophe PLAGNIOL-VILLARD2009-07-08-1065/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | all sh boards use the same cpu linker script so move it to cpu/$(CPU) that could be overwrite in following order SOC BOARD via the corresponding config.mk tested on r2dplus Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | sh: make the linker scripts more genericJean-Christophe PLAGNIOL-VILLARD2009-07-08-309/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | currently we need to sync the linker script enty and TEXT_BASE manualy and the reloc_dst is based on it instead provide it now from the ldflags tested on r2dplus Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | sh7785lcr: fix out of tree buildJean-Christophe PLAGNIOL-VILLARD2009-07-08-1/+1
| | |/ | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | board support patch for phyCORE-MPC5200B-tinyJon Smirl2009-07-10-0/+348
|/ / | | | | | | | | | | | | | | | | | | Add support for the Phytec phyCORE-MPC5200B-tiny. Code originally from Pengutronix.de. Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on Timer 0/1 Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-07-08-2/+4
|\ \
| * | ppc4xx: Fix FDT EBC mappings on CanyonlandsFelix Radensky2009-07-08-2/+4
| |/ | | | | | | | | | | | | | | | | | | This patch fixes 2 problems with FDT EBC mappings on Canyonlands. First, NAND EBC mapping was missing, making Linux NAND driver unusable on this board. Second, NOR remapping code assumed that NOR is always on CS0, however when booting from NAND NOR is on CS3. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | mtd: nand: new base driver for memory mapped nand devicesMike Frysinger2009-07-07-101/+0
| | | | | | | | | | | | | | | | | | The BF537-STAMP Blackfin board had a driver for working with NAND devices that are simply memory mapped. Since there is nothing Blackfin specific about this, generalize the driver a bit so that everyone can leverage it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | davinci_nand chipselect/init cleanupDavid Brownell2009-07-07-0/+28
|/ | | | | | | | | | | | | | | | | Update chipselect handling in davinci_nand.c so that it can handle 2 GByte chips the same way Linux does: as one device, even though it has two halves with independent chip selects. For such chips the "nand info" command reports: Device 0: 2x nand0, sector size 128 KiB Switch to use the default chipselect function unless the board really needs its own. The logic for the Sonata board moves out of the driver into board-specific code. (Which doesn't affect current build breakage if its NAND support is enabled...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Coding style cleanup; update CHANGELOGWolfgang Denk2009-07-07-37/+37
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-07-2204/+1400
|\ | | | | | | | | | | | | Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * MX31: Add NAND SPL boot support to i.MX31 PDK board.Magnus Lilja2009-07-06-0/+97
| | | | | | | | Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| * arm nomadik: allow Nand and OneNand to coexistsAlessandro Rubini2009-07-06-0/+4
| | | | | | | | | | | | | | | | | | The evaluation kit has both Nand and OneNand, both drivers are there and the two configurations only select a different default for the jffs partition. This adds the OneNand driver and cleans up storage. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * arm nomadik: rename board to nhk8815Alessandro Rubini2009-07-06-1/+1
| | | | | | | | | | | | | | | | This is an error in my side in the initial submission: nobody calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * xscale: add support for the polaris boardStefano Babic2009-07-06-10/+12
| | | | | | | | | | | | | | The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com). Signed-off-by: Stefano Babic <sbabic@denx.de>
| * xscale: fix USB initialization for Trizepsiv moduleStefano Babic2009-07-06-2/+3
| | | | | | | | | | | | | | | | Due to change in the usb_board_init() prototype, the USB for the TrizepsIV was not correctly initialized. Removed dummy print from usb_board_stop(). Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-12-27 03:29:26 +0000