summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* Merge with /home/stefan/git/u-boot/bamboo-nandStefan Roese2007-06-01-109/+123
|\
| * ppc4xx: Update Sequoia NAND booting support with ECCStefan Roese2007-06-01-0/+4
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Prepare Bamboo port for NAND booting supportStefan Roese2007-06-01-109/+119
| | | | | | | | | | | | | | | | | | | | This patch updates the "normal" Bamboo NOR booting port, so that it is compatible with the coming soon NAND booting Bamboo port. It also enables the 2nd NAND flash on the Bamboo. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHzStefan Roese2007-06-01-6/+0
| | | | | | | | | | | | | | | | This patch undoes the patch by Jeff Mann with commit-id ada4697d. As suggested by AMCC it is not recommended to dynamically change the EBC speed after bootup. So we undo this change to be on the safe side. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge with /home/tur/git/u-boot#motionproWolfgang Denk2007-05-28-5/+52
|\ \
| * | Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.Bartlomiej Sieka2007-05-27-6/+6
| | | | | | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | MPC5XXX, Motion-PRO: Fix PHY initialization problem.Bartlomiej Sieka2007-05-27-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which networking does not function. This commit switches PHY to TX mode by clearing the FX_SEL bit of Mode Control Register. It also reverses commit 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
| * | Motion-PRO: Add displaying of CPLD revision information during boot.Bartlomiej Sieka2007-05-27-1/+2
| | | | | | | | | | | | | | | Signed-off-by: Jan Wrobel <wrr@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
| * | Motion-PRO: Add LED support.Bartlomiej Sieka2007-05-27-0/+30
| | | | | | | | | | | | | | | | | | Signed-off-by: Jan Wrobel <wrr@semihalf.com> Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
* | | ppc4xx: Update AMCC Acadia support for board revision 1.1Stefan Roese2007-05-24-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the Acadia (405EZ) support for the new 1.1 board revision. It also adds support for NAND FLASH via the 4xx NDFC. Please note that the jumper J7 must be in position 2-3 for this NAND support. Position 1-2 is for NAND booting only. NAND booting support will follow later. Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-05-18-27/+488
|\ \ \
| * \ \ Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xxWolfgang Denk2007-05-16-2/+424
| |\ \ \
| | * | | Fix memory initialization on MPC8349E-mITXTimur Tabi2007-05-01-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary on some ITX boards, notably those with a revision 3.1 CPU. Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Michael Benedict <MBenedict@twacs.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| | * | | mpc83xx: Add MPC8313ERDB support.Scott Wood2007-04-23-0/+423
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | Merge with /home/wd/git/u-boot/custodian/u-boot-microblazeWolfgang Denk2007-05-16-25/+53
| |\ \ \ \
| | * \ \ \ Merge git://www.denx.de/git/u-bootMichal Simek2007-05-08-1501/+12270
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: include/asm-microblaze/microblaze_intc.h include/linux/stat.h
| | * | | | | new: USE_MSR_INTR supportMichal Simek2007-05-07-1/+2
| | | | | | |
| | * | | | | new: fsl interrupt supportMichal Simek2007-05-07-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | FSL_Has_data is connected to INTC.
| | * | | | | new: add writing to msr registerMichal Simek2007-05-07-15/+19
| | | | | | |
| | * | | | | new: FSL and MSR support #2Michal Simek2007-05-05-0/+3
| | | | | | |
| | * | | | | Change ML401 parameters - Xilinx BSPMichal Simek2007-04-21-13/+13
| | | | | | |
| * | | | | | Merge with /home/tur/git/u-boot#motionproWolfgang Denk2007-05-15-0/+11
| |\ \ \ \ \ \ | | |_|/ / / / | |/| | | / / | | | |_|/ / | | |/| | |
| | * | | | [Motion-PRO] Enable Flat Device Tree support and modify default environmentBartlomiej Sieka2007-05-08-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | to allow booting of FDT-expecting kernels.
* | | | | | [PATCH] Run new sequoia boards with an EBC speed of 83MHzJeffrey Mann2007-05-16-2/+8
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the Sequoia board does not boot with an EBC faster than 66MHz, the clock divider are changed after the initial boot process. This allows for maximum clocking speeds to be achieved on newer boards. Sequoia boards with 666.66 MHz processors require that the EBC divider be set to 3 in order to start the initial boot process at a slower EBC speed. After the initial boot process, the divider can be set back to 2, which will cause the boards to run at 83.333MHz. This is backward compatible with boards with 533.33 MHz processors, as these boards will already be set with an EBC divider of 2. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
* | | | | Coding stylke cleanup; update CHANGELOG.Wolfgang Denk2007-05-05-13/+9
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-05-05-95/+10
|\ \ \ \ \
| * \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-05-05-0/+897
| |\ \ \ \ \
| * | | | | | ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND bootingStefan Roese2007-05-05-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big for the 4k NAND boot image so define bus_frequency to 133MHz here which is save for the refresh counter setup. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-04-29-220/+2231
| |\ \ \ \ \ \ | | | |_|_|/ / | | |/| | | / | | |_|_|_|/ | |/| | | |
| * | | | | ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driverStefan Roese2007-04-29-94/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-05-05-46/+1743
|\ \ \ \ \ \
| * | | | | | Cleaned up some 85xx PCI bugsAndy Fleming2007-05-02-11/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Cleaned up the CDS PCI Config Tables and added NULL entries to the end * Fixed PCIe LAWBAR assignemt to use the cpu-relative address * Fixed 85xx PCI code to assign powar region sizes based on the config values (rather than hard-coding them) * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | | | Add support for the 8568 MDS boardAndy Fleming2007-05-02-0/+979
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | | | Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nGAndy Fleming2007-04-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The other pagesz constants use one letter to specify order of magnitude. Also change the one reference to it in mpc8548cds/init.S Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | | | Add MPC8544DS basic port board files.Jon Loeliger2007-04-23-0/+686
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board port under new board/freescale directory structure and reuse existing PIXIS FPGA support there. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | | | | Fix PCI I/O space mapping on Freescale MPC85x0ADSSergei Shtylyov2007-04-23-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's describing the local address window used for the PCI I/O space accesses -- fix this and carry over the necessary changes into the MPC8560ADS code since the PCI I/O space mapping was also broken for this board (by the earlier commit 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how the PCI I/O space must be mapped to all the MPC85xx board config. headers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> board/mpc8540ads/init.S | 4 ++-- board/mpc8560ads/init.S | 4 ++-- include/configs/MPC8540ADS.h | 5 ++--- include/configs/MPC8541CDS.h | 2 +- include/configs/MPC8548CDS.h | 2 +- include/configs/MPC8560ADS.h | 8 ++++---- 6 files changed, 12 insertions(+), 13 deletions(-)
| * | | | | | u-boot: Fix the 85xxcds tsec bugZang Roy-r619112007-04-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the 85xxcds tsec bug. When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| * | | | | | u-boot: Fix CPU2 errata on MPC8548CDS boardZang Roy-r619112007-04-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch apply workaround of CPU2 errata on MPC8548CDS board. Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
| * | | | | | u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS boardZang Roy-r619112007-04-23-32/+46
| | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* | | | | | Make "file" command happy with some config.mk files; update CHANGELOGWolfgang Denk2007-05-05-0/+2
| | | | | |
* | | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-nand-flashWolfgang Denk2007-05-05-6/+0
|\ \ \ \ \ \
| * \ \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-05-05-0/+897
| |\ \ \ \ \ \ | | | |_|/ / / | | |/| | | |
| * | | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-04-23-5/+3
| |\ \ \ \ \ \ | | | |/ / / / | | |/| | | |
| * | | | | | Remove BOARDLIBS usage completelyStefan Roese2007-04-23-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-05-05-5/+5
|\ \ \ \ \ \ \ | |_|_|/ / / / |/| | | | | |
| * | | | | | mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.Ed Swarthout2007-04-20-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
| * | | | | | Enable LAWs for MPC8641 PCI-Ex2.Zhang Wei2007-04-20-2/+2
| | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | | | Cleanup STX GP3SSA code; fix build and compile problems.Wolfgang Denk2007-05-03-10/+14
| | | | | |
* | | | | | Add support for STX GP3SSA (stxssa) BoardDan Malek2007-05-03-0/+893
|/ / / / / | | | | | | | | | | | | | | | Signed-off-by Dan Malek, <dan@embeddedalley.com>
* | | | | Cleanup compiler warnings, update CHANGELOGWolfgang Denk2007-04-20-4/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.1 at 2024-11-23 07:18:21 +0000