summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* 85xxCDS: Enable the VIA PCI-to-ISA bridge.Andy Fleming2007-08-14-1/+6
| | | | | | | | | | Author: Randy Vinson <rvinson@linuxbox.(none)> Enable the PCI-to-ISA bridge in the VIA Southbridge located on the Arcadia main board. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: York Sun <yorksun@freescale.com>
* Add support for UEC to 8568Andy Fleming2007-08-14-1/+68
| | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Add PCI support for MPC8568MDS boardHaiying Wang2007-08-14-34/+74
| | | | | | | This patch is against u-boot-mpc85xx.git of www.denx.com Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
* Fix minor 85xx warningsAndy Fleming2007-08-14-1/+0
| | | | | | | | | | | Some patches had inserted warnings into the build: * mpc8560ads declared data without using it * cpu_init declared ecm and immap without using it in all CONFIGs * MPC8548CDS.h had its default filenames changed so that they contained "\m" in the paths. Made the defaults not Windows-specific (or anything-specific) Signed-off-by: Andy Fleming <afleming@freescale.com>
* 8548cds PCIE support.Ed Swarthout2007-08-14-115/+291
| | | | | | | | | | | | | | | | | | | | Make the early L1 cache stack region guarded to prevent speculative fetches outside the locked range. Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. init.S whitespace cleanup. Allow TEXT_BASE value to be specified on command line. This allows it to be set to 0xfffc0000 which cuts the uboot binary in half. Clear and enable lbc and ecm errors. Update last_busno in device-tree for pci and pcie. Remove load of obsolete cpu/mpc85xx/pci.0 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* 8544ds PCIE supportEd Swarthout2007-08-14-3/+353
| | | | | | | | | | | | | | | | | | PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. Enable LBC and ECM errors and clear error registers. Add tftpflash env var to get uboot from tftp server and flash it. Add pci/pcie convenience env vars to display register space: "run pcie3regs" to see all pcie3 ccsr registers "run pcie3cfg" to see all cfg registers Whitespace cleanup and MPC8544DS.h Enable CONFIG_INTERRUPTS. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-08-13-2/+817
|\
| * Merge commit 'remotes/wd/master'Jon Loeliger2007-08-13-17/+1286
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: MAKEALL With any luck, this is the last MAKEALL merge conflict!
| * | Modify SBC8641D to use new Freescale PCI routinesJoe Hamman2007-08-13-38/+118
| | | | | | | | | | | | | | | | | | | | | | | | PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT adapter. Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> Signde-off-by: Jon Loeliger <jdl@freescale.com>
| * | Add support for SBC8641D. Board files.Joe Hamman2007-08-10-0/+735
| | | | | | | | | | | | | | | | | | | | | | | | Add support for Wind River's SBC8641D reference board. Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Jon Loeliger <jdl@freescale.com>
| * | 8641hpcn: Do correct sized pointer math.Jon Loeliger2007-08-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | When I rebased Ed's patch and cleaned up a few compilation problems, I apparently rebased my brain on crack first. Fix that by doing (char *) sized pointer math as needed. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | Minor coding style cleanup. Update CHANGELOG.Wolfgang Denk2007-08-13-5/+5
| |/ |/| | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Cleanup output on ADS5121 boardWolfgang Denk2007-08-12-2/+0
| | | | | | | | Signed-off-by: Wolfgang Denk
* | Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/masterWolfgang Denk2007-08-12-11/+23
|\ \
| * | Adapt board configuration and fix kernel crash on MCC200 board.Wolfgang Denk2007-08-12-11/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The update procedure was modified to turn off the USB subsystem before exit for MCC200 and TRAB. This is necessary as otherwise the USB controller continues to write periodically to system memory! MCC200-specific notes: - the patch disables the magic key check for MCC200 - the patch contains the configuration changes made for the new revision of the board. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.Wolfgang Denk2007-08-12-4/+4
|/ / | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-10-728/+311
|\ \ | |/
| * mpc83xx: fix ITX[GP] O=builddir buildsKim Phillips2007-08-10-6/+0
| | | | | | | | | | | | | | | | | | make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or "BUILD_DIR=<some dir> ./MAKEALL ..." Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Consolidate the ECC support of 83xxDave Liu2007-08-10-705/+0
| | | | | | | | | | | | | | | | Remove the duplicated source code of ecc command on the <board>.c, for reused, move these code to cpu/mpc83xx directory. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: add support for the MPC8323E RDBKim Phillips2007-08-10-0/+295
| | | | | | | | | | | | | | | | | | | | | | MPC8323E based board with 64MB fixed SDRAM, 16MB flash, five 10/100 ethernet ports connected via an ICPlus IP175C switch, one PCI slot, and serial. Features not supported in this patch are SD card interface, 2 USB ports, and the two phone ports. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: fix 8360 and cpu functions to update fdt being passedKim Phillips2007-08-10-4/+4
| | | | | | | | | | | | | | ..and not the global fdt. Rename local fdt vars to blob so as not to be confused with the global var with the same three-letter name. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().Jerry Van Baren2007-08-10-14/+11
| | | | | | | | | | | | | | | | | | | | | | The new name matches more closely the kernel's name, which is also a much better description. These are the mpc83xx changes made necessary by the function name change. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Add support for 8360 silicon revision 2.1Lee Nipper2007-08-10-1/+3
| | | | | | | | | | | | | | This change adds 8360 silicon revision 2.1 support to u-boot. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | [ARM] TI DaVinci support, hopefully finalSergey Kubushyn2007-08-10-0/+1259
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
* Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-07-116999/+5919
|\
| * Merge with /home/tur/git/u-boot#cm5200-siWolfgang Denk2007-08-07-232/+634
| |\
| | * cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.Bartlomiej Sieka2007-08-03-232/+634
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability for modules from the Schindler cm5200 family to use a single U-Boot image: - rename cm1_qp1 to cm5200 - add run-time module detection - parametrize SDRAM configuration according to the module we are running on Few minor, board-specific fixes included in this patch: - better MAC address handling - updated default environment ('update' command uses +{filesize} now) - improved error messages in the auto-update code - allow booting U-Boot from RAM (CFG_RAMBOOT) Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-06-106144/+45
| |\ \
| | * | Remove the bios emulator from MAI board.Jason Jin2007-08-06-106101/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bios emulator in the MAI board can not pass compile and have a lot of crap in it. remove it and will have a clean and small bios emulator in the drivers directory which can be uesed for every board. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
| | * | Fix some compile issues for MAI board.Jason Jin2007-08-06-43/+44
| | | | | | | | | | | | | | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com>
| | * | Configurations for ATI video card BIOS emulatorJason Jin2007-08-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add definition of the BIOS emulator and the ATI framebuffer driver for MPC8641HPCN board. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
| * | | Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-06-9289/+461
| |\ \ \ | | |/ / | | | / | | |/ | |/|
| | * Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-08-06-268/+791
| | |\
| | | * Merge branch 'testing' into workingAndy Fleming2007-08-03-9233/+285
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| | | * | 8544ds: Fix Makefile after moving pixis to board/freescale.Ed Swarthout2007-07-11-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OBJTREE != SRCTREE build scenario was broken. This fixes it. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | | * | Add support for CPM device tree configuration to 8560 ADSAndy Fleming2007-07-11-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Adds code to modify CPM frequencies * Cleans up the config file to #define TSEC and (for now) #undef FCC * Adds the MII command for all 8560 ADS configurations * Updates config file to provide convenience commands for booting with a device tree Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | | Add functions to list of exported functionsMartin Krause2007-08-06-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Additionally export the following fuctions (to make trab_config build again): - simple_strtol() - strcmp() Also bump the ABI version to reflect this change Signed-off-by: Martin Krause <martin.krause@tqs.de>
| | * | | Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.Ed Swarthout2007-08-06-40/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the PCI/PCI-Express driver and initialization code that was in the MPC8641HPCN port has now been moved into the common drivers/fsl_pci_init.c. In a subsequent patch, this will be utilized by the 85xx ports as well. Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. Also enable the second PCI-Express controller on 8641 by getting its BATS and CFG_ setup right. Fixed a u16 vendor compiler warning in AHCI driver too. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | | Fix build errors and warnings / code cleanup.Wolfgang Denk2007-08-02-14/+23
| | | |/ | | |/| | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-42/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-36/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.Jon Loeliger2007-07-10-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | board/[q-z]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-39/+39
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | board/[m-p]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-39/+39
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | board/[f-l]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-34/+34
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | board/[d-e]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-28/+28
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-31/+31
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | include/configs: Use new CONFIG_CMD_* in various A* named board config files.Jon Loeliger2007-07-07-15/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ADS860.h includes "board/fads/fads.h" with ramifications on the CONFIG_COMMAND treatment, it too has to be adjusted to exclude already configured commands in this same commit. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * | Correct fixup relocation for mpc8260Grant Likely2007-07-04-3/+0
| | | | | | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | * | Correct fixup relocation for mpc824xGrant Likely2007-07-04-1/+0
| | | | | | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.1 at 2024-12-24 05:19:42 +0000