summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* change mvBL-M7 default env and move to vendor subdirAndre Schwarz2008-08-25-2/+8
| | | | | | | fix mvBL-M7 config and move to matrix_vision subdir Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* MPC8349EMDS: Add PCI Agent (PCISLAVE) supportIra W. Snyder2008-08-25-0/+58
| | | | | | | | Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a PCI card rather than a host computer. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* MPC8349EMDS: use 83XX_GENERIC_PCI setup codeIra W. Snyder2008-08-25-317/+60
| | | | | | | | Change the MPC8349EMDS board to use the generic PCI initialization code for the mpc83xx cpu. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'next'Kim Phillips2008-08-25-2/+37
|\
| * 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixupAnton Vorontsov2008-07-16-9/+10
| | | | | | | | | | | | | | | | | | | | The thinko was quite silly indeed, I messed with !ptr. Normally this would trigger some fault, but in U-Boot NULL pointer is equal to phys 0, so the code was working still, just didn't actually test mpc8315erdb environment variable value. Heh. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYsAnton Vorontsov2008-07-16-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI support, or without TSEC1 but with USB ULPI PHY support in addition. With this patch user can specify desired USB PHY. Also, it seems that we can't distinguish the two boards in software, so user have to set `mpc8315erdb' environment variable to either 'tsec1' (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that Linux will not probe for TSEC1. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | fix mvbc_p board build warningsAndre Schwarz2008-08-21-6/+6
| | | | | | | | | | | | | | fix build warnings @ mvBC-P board by using correct types, i.e. change out_be32 to out_be16 and out_8 accordingly. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
* | Merge branch 'next' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-08-20-27/+971
|\ \ | | | | | | | | | | | | | | | Conflicts: MAINTAINERS
| * | favr-32-ezkit: Fix printf format warningsHaavard Skinnemoen2008-08-20-2/+2
| | | | | | | | | | | | Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | Merge branch 'mimc200' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-08-20-0/+323
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAKEALL Makefile
| | * | avr32: Add MIMC200 boardMark Jackson2008-08-20-0/+323
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | Merge branch 'favr-32' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-08-06-165/+564
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS MAKEALL Makefile
| | * | | avr32: add support for EarthLCD Favr-32 boardHans-Christian Egtvedt2008-08-06-0/+443
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Favr-32 board made by EarthLCD. This kit, which is also called ezLCD-101 when running with EarthLCD firmware, has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash, Ethernet, audio out, USB device, SD-card slot, USART and various other connectors for cennecting stuff to SPI, I2C, GPIO, etc. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | Merge branch 'hammerhead' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-07-30-881/+165
| |\ \ \
| | * | | Add support for the hammerhead (AVR32) boardJulien May2008-07-30-0/+230
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. For more information see: http:///www.miromico.com/hammerhead Signed-off-by: Julien May <mailinglist@miromico.ch> [haavard.skinnemoen@atmel.com: various small fixes and adaptions] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | | Merge branch 'eth-cleanup' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-07-30-76/+24
| |\ \ \ \
| | * | | | Moved initialization of AVR32 Ethernet controllers to board_eth_init()Ben Warren2008-07-24-76/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Renamed initialization functions for atngw100 and atstk1000. Removed initializations for these boards from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | | | | | Clean up usage of icache_disable/dcache_disableKumar Gala2008-08-19-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no point in disabling the icache on 7xx/74xx/86xx parts and not also flushing the icache. All callers of invalidate_l1_instruction_cache() call icache_disable() right after. Make it so icache_disable() calls invalidate_l1_instruction_cache() for us. Also, dcache_disable() already calls dcache_flush() so there is no point in the explicit calls of dcache_flush(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | | | ColdFire: Multiple fixes for M5282EVBTsiChung Liew2008-08-14-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect CFG_HZ value, change 1000000 to 1000. Rename #waring to #warning. RAMBAR1 uses twice in start.S, rename the later to FLASHBAR. Insert nop for DRAM setup. And, env_offset in linker file. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Move m5282evb from board to board/freescaleTsiChung Liew2008-08-14-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Move m5272c3 from board to board/freescaleTsiChung Liew2008-08-14-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Move m5271evb from board to board/freescaleTsiChung Liew2008-08-14-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Add M54451EVB platform support for MCF5445xTsiChung Liew2008-08-14-0/+774
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Implement SBF feature for M5445EVBTsiChung Liew2008-08-14-3/+147
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Use CFI Flash driver for M54455EVBTsiChung Liew2008-08-14-1289/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove non-common flash driver in board/freescale/m54455evb/flash.c. The non-cfi flash will use CONFIG_FLASH_CFI_LEGACY to configure the flash attribute. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Add M5253DEMO platform support for MCF5253TsiChung Liew2008-08-14-0/+820
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | ColdFire: Fix M5253EVB dram bring up issueTsiChung Liew2008-08-14-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2008-08-14-216/+153
|\ \ \ \ \ \
| * | | | | | socrates: Update NAND driver to new API.Scott Wood2008-08-13-52/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, fix some minor formatting issues, and simplify the handling of "state" for writes. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | | | quad100hd: Update NAND driver to new API.Scott Wood2008-08-13-23/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | | | m5373evb: Update NAND driver to new API.Scott Wood2008-08-13-46/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | | | at91: Update board NAND drivers to current API.Scott Wood2008-08-13-95/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* | | | | | | Merge branch 'Makefile' of git://git.denx.de/u-boot-armWolfgang Denk2008-08-13-19/+19
|\ \ \ \ \ \ \
| * | | | | | | drivers/mtd/nand: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-13-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | | | | | drivers/mtd: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-13-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | | | | | mx31: move freescale's mx31 boards to vendor board dirJean-Christophe PLAGNIOL-VILLARD2008-08-13-5/+5
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | | | | | Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese2008-08-13-328/+257
|\ \ \ \ \ \ \ | |/ / / / / /
| * | | | | | NAND boot: MPC8313ERDB supportScott Wood2008-08-12-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note that with older board revisions, NAND boot may only work after a power-on reset, and not after a warm reset. I don't have a newer board to test on; if you have a board with a 33MHz crystal, please let me know if it works after a warm reset. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | | | Fixing coding style issuesWilliam Juul2008-08-12-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fixing leading white spaces - Fixing indentation where 4 spaces are used instead of tab - Removing C++ comments (//), wherever I introduced them Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | | | Remove white space at end.William Juul2008-08-12-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | | | Update MTD to that of Linux 2.6.22.1William Juul2008-08-12-328/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot changed in the Linux MTD code, since it was last ported from Linux to U-Boot. This patch takes U-Boot NAND support to the level of Linux 2.6.22.1 and will enable support for very large NAND devices (4KB pages) and ease the compatibility between U-Boot and Linux filesystems. This patch is tested on two custom boards with PPC and ARM processors running YAFFS in U-Boot and Linux using gcc-4.1.2 cross compilers. MAKEALL ppc/arm has some issues: * DOC/OneNand/nand_spl is not building (I have not tried porting these parts, and since I do not have any HW and I am not familiar with this code/HW I think its best left to someone else.) Except for the issues mentioned above, I have ported all drivers necessary to run MAKEALL ppc/arm without errors and warnings. Many drivers were trivial to port, but some were not so trivial. The following drivers must be examined carefully and maybe rewritten to some degree: cpu/ppc4xx/ndfc.c cpu/arm926ejs/davinci/nand.c board/delta/nand.c board/zylonite/nand.c Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Stig Olsen <stig.olsen@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | | | | | | Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese2008-08-12-395/+155
|\ \ \ \ \ \ \ | |/ / / / / /
| * | | | | | Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk2008-08-12-18/+18
| |\ \ \ \ \ \
| | * | | | | | i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.Magnus Lilja2008-08-11-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX contacts instead of only the first 256 ones as is the case prior to this patch. Add missing MUX_* macros and update board files to use the new macros. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| | * | | | | | i.MX31: Fix IOMUX related typosMagnus Lilja2008-08-11-4/+4
| | | |_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the names of some IOMUX macros. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| * | | | | | Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese2008-08-11-377/+132
| |\ \ \ \ \ \
| | * | | | | | mpc85xx: workaround old binutils bugKumar Gala2008-08-10-35/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent change to move the .bss outside of the image gives older binutils (ld from eldk4.1/binutils-2.16) some headache: ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4) ppc_85xx-ld: final link failed: Bad value We workaround it by being explicit about the program headers and not assigning the .bss to a program header. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | | | | mpc5121: Move iopin features from board specific to common files.Kenneth Johansson2008-08-05-342/+55
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And in the process eliminate some duplicate register defines. Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
| * | | | | | ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per ↵Steven A. Falco2008-08-07-0/+5
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | schematic. The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the SDR0_PFC1 register to select the corresponding mode for the UARTs. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | Fix compilation error for TASREGTsiChung Liew2008-08-01-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TASREG is ColdFire platform, the include ppc4xx.h in board/esd/common/flash.c causes conflict. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
generated by cgit v1.1 at 2024-12-26 23:44:10 +0000