summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeLines
* MLK-12889 mx6ullarm2: Update DDR script to version 2.2Ye Li2016-06-08-2/+2
* MLK-12884 mx7dsabresd: Fix LCD_PWR_EN output settingYe Li2016-06-06-1/+1
* MLK-12815: mx6ul_14x14_evk: add new NAND config for i.MX6UL 14x14 EVK boardHan Xu2016-05-23-0/+2
* MLK-12800 imx: mx7dsabresd: support revCPeng Fan2016-05-16-4/+13
* MLK-12791 mx6qpsabresd: Change ENET TXCLK clock from PLLYe Li2016-05-16-0/+10
* MLK-12748-3 imx: adjust imx7d lpddr3 lpsr exit flowAnson Huang2016-05-09-1/+13
* MLK-12748-2 imx: remove IOMUXC GPR setting for i.mx7d retention modeAnson Huang2016-05-09-3/+3
* MLK-12748-1 imx: adjust i.mx7d standby voltage settingAnson Huang2016-05-09-14/+14
* MLK-12629-2: i.MX6QP: update pluginPeng Fan2016-05-04-0/+12
* MLK-12735 mx6qpsabresd: Update DDR script to version 1.14Ye Li2016-04-29-6/+28
* MLK-12705-1 ARM: imx: add support for i.MX7D TO1.2Anson Huang2016-04-29-59/+59
* MLK-12694 mx6ullarm2: Remove the CD detection of SD2Ye Li2016-04-22-3/+1
* MLK-12687 mx6ullarm2: Clean up macro usage for pins conflict devicesYe Li2016-04-21-8/+8
* MLK-12690 imx: mx6ull: fix build error for pluginPeng Fan2016-04-21-1/+1
* MLK-12677 mx6ullarm2: Update DDR script to version 2.1Ye Li2016-04-20-5/+6
* MLK-12616-11 imx: mx6ull: add mx6ull arm2 board supportPeng Fan2016-04-13-0/+1120
* MLK-12563: imx: mx6ul evk: fix LCD_nPWREN settingPeng Fan2016-03-25-1/+1
* MLK-12551: imx6ul evk: fix 74LV OE usagePeng Fan2016-03-25-7/+1
* MLK-12483-5 mx6ul: Enable module fuse check EVK board and DDR3 ARM2 boardYe Li2016-03-25-1/+58
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2016-03-25-2/+12
* MLK-12371-2: imx: mx7dsabresd: fix POR reset failed after DDR enter retentionRobin Gong2016-03-25-0/+9
* MLK-12555-3 mx7dsabresd: Remove the SRS setting for wdogYe Li2016-03-25-6/+0
* MLK-12555-2 mx6ulevk: Enable the Watchdog WDOG_B signal outputYe Li2016-03-25-0/+2
* MLK-12555 mx6sxsabreauto: Enable the Watchdog WDOG_B signal outputYe Li2016-03-25-0/+3
* MLK-12553 mx6sabresd: Add RGMII supportYe Li2016-03-25-0/+33
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2016-03-25-6/+31
* MLK-12531 mx6sxsabresd: Add CM4 fast boot up demoYe Li2016-03-25-0/+19
* MLK-12527-3 android: Add board support to enable android fastbootYe Li2016-03-25-1/+746
* MLK-12527-2 android: Add FSL android fastboot supportYe Li2016-03-25-0/+81
* MLK-12529 mx7dsabresd: Fix soc revision check issueYe Li2016-03-25-1/+1
* MA-7455-1 Pico: modify Pico configuration for Brillo.Peng Fan2016-03-25-68/+24
* MA-7455 Import picosom boot codesHaoran Wang2016-03-25-0/+931
* MLK-12500-2 HAB: Add commented secure boot configurationsYe Li2016-03-25-0/+11
* MLK-12497-2 mx7d: Add reference DDR script for mx7d TO1.0Ye Li2016-03-25-0/+691
* MLK-12497-1 mx7d: Add support for all mx7d arm2 boardsYe Li2016-03-25-0/+4422
* MLK-12495 mx6: Add LDO bypass supportYe Li2016-03-25-0/+329
* MLK-12493-2 mx6ulevk: Use CONFIG_TARGET_MX6UL_9X9_EVK for 9x9 LPDDR2 scriptYe Li2016-03-25-1/+1
* MLK-12493-1 Add support for various boot deviceYe Li2016-03-25-0/+4
* MLK-12486-2 imx6: Add i.mx6sx/ul arm2 boardsPeng Fan2016-03-25-0/+5184
* MLK-12486-1: switch to use setup_gpmi_io_clk for i.MX6ULPeng Fan2016-03-25-28/+2
* MLK-12452-4 mx6sxsabreauto: Add secondary enet supportYe Li2016-03-25-7/+32
* MLK-12452-3 mx6sxsabresd: Add secondary enet supportYe Li2016-03-25-6/+31
* MLK-12452-2 mx7dsabresd: Add secondary enet supportYe Li2016-03-25-58/+54
* MLK-12436-17: imx: mx6sxauto: update board and headerPeng Fan2016-03-25-18/+80
* MLK-12436-16: imx: mx6sxsdb: update board and headerPeng Fan2016-03-25-17/+117
* MLK-12436-15: imx: mx7dsdb: add RevB supportPeng Fan2016-03-25-34/+211
* MLK-12436-14: imx: mx7dsdb: update ddr scriptPeng Fan2016-03-25-5/+22
* MLK-12436-13: mx6ulevk: update board codePeng Fan2016-03-25-7/+65
* MLK-12436-12: mx6slevk: update board codePeng Fan2016-03-25-4/+92
* MLK-12436-10: mx6sabresd: update board code and header fileYe Li2016-03-25-19/+81
generated by cgit v1.1 at 2024-12-18 04:10:08 +0000