summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* powerpc/BSC9131RDB: Enable creation of dynamic partitions for NANDAshish Kumar2014-11-14-0/+11
| | | | | | | | | | * fdt_fixup_mtdparts is called from ft_board_setup * Run "mtdparts default" to create NAND partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NORAshish Kumar2014-11-14-0/+12
| | | | | | | | | | * fdt_fixup_mtdparts is called from ft_board_setup * run "mtdparts default" to create NAND, NOR partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* t104xrdb: Add Errata A_007662, A_008007 workaround in pbi.cfgPriyanka Jain2014-11-14-0/+10
| | | | | | | | | | | | | | | | | -A_007662 states that for x1 link width, PCIe2 controller trains in Gen1 speed while configured for Gen2 speed. Workaround:Set the width to x1 and speed to Gen2 by writing to CCSR registers in PBI phase -A_008007 states that PVR register may show random value. Workaround: Reset PVR register using DCSR space in PBI phase Add PBI based software workaround for A_007662 and A_008007 in t104x_pbi.cfg. This is required for SPL-based bootloaders like NAND-boot, SD-boot, SPI-boot Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4rdb: Add support of CPLDChunhe Lan2014-11-14-0/+206
| | | | | | | | | | | This support of CPLD includes - Files and register definitions - Command to switch alternate bank - Command to switch default bank Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2014-11-13-1/+49
|\
| * sunxi: gmac: Update bananapi fixup to the new CONFIG_TARGET_<BOARD> structureZoltan HERPAI2014-11-13-1/+1
| | | | | | | | | | | | | | | | The magic bit toucher needs to be updated to reflect the new board Kconfig structure Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sun6i: ehci: Add sun6i ehci supportHans de Goede2014-11-13-0/+2
| | | | | | | | | | | | | | | | Add support for the 2 ehci controllers found on the sun6i (A31) soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Marek Vasut <marex@denx.de>
| * sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-sHans de Goede2014-11-13-0/+14
| | | | | | | | | | | | | | | | | | Add proper Kconfig options to select the usb Vbus gpio-s, besides moving to Kconfig being the right thing to do, an added advantage of this is that it allows for boards without Vbus gpio-s. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sun6i: Add Mele M9 boardHans de Goede2014-11-13-0/+5
| | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sun6i: Enable SPLHans de Goede2014-11-13-0/+1
| | | | | | | | | | | | | | Enable the SPL now that we've all the necessary bits in place. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sun6i: Add basic axp221 driverOliver Schinagl2014-11-13-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A31 uses the AXP221 pmic for various voltages. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> -- Changes in v2: -Rebase Changes in v3: -Add support for all dldo and aldo-s -Add Kconfig option to select building AXP221 and to select voltage of dldo and aldo-s Changes in v4: -Add axp221_setbits helper function -Use symbolic names for enabled bits in CTRL1 - CTRL3 registers
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-11-13-3/+8
|\ \
| * | zynq: Use GPLed files for SPLSoren Brinkmann2014-11-11-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest Xilinx tools generate ps7_init files that are explicitly available under GPL. Change the makefile to allow drop in of those files for building the SPL. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Reviewed-and-tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | kconfig: arm: select CPU_V7 for some new boardsMasahiro Yamada2014-11-13-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds "select CPU_V7" for some new boards that were not covered by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). Redundant "SYS_CPU" defines and "string" directives should be removed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Georges Savoundararadj <savoundg@gmail.com>
* | | powerpc: remove orphaned boards mcc200 and prs200Nikita Kiryanov2014-11-12-1125/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mcc200 and prs200 are old and have no maintainer. Remove the boards. This also removes the mcc200 specific 1bpp BMP support from common/lcd.c Cc: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-11-11-0/+21
|\ \ \ | |_|/ |/| |
| * | arm: socfpga: Add example UDC configMarek Vasut2014-11-07-0/+21
| |/ | | | | | | | | | | | | | | | | | | | | | | Add example of an USB UDC configuration with DFU and UMS. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* | board/esd/common/auto_update.c: fix Uninitialized variableWolfgang Denk2014-11-10-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | cppcheck reports: [board/esd/common/auto_update.c:458]: (error) Uninitialized variable: cnt The variable is not really used anywhere, so remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* | board/matrix_vision/mvblx/sys_eeprom.c: fix buffer overflowWolfgang Denk2014-11-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix error detected by cppcheck: [board/matrix_vision/mvblx/sys_eeprom.c:353]: (error) Buffer is accessed out of bounds. Signed-off-by: Wolfgang Denk <wd@denx.de> cc: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Michael Jones <michael.jones@matrix-vision.de>
* | board/cogent/lcd.c: fix syntax errorWolfgang Denk2014-11-07-1/+1
| | | | | | | | | | | | | | | | | | | | Fix error detected by cppcheck: [board/cogent/lcd.c:237]: (error) Invalid number of character (() when these macros are defined: 'CONFIG_SHOW_ACTIVITY;CONFIG_STATUS_LED'. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | cppcheck cleanup: fix nullPointer errorsWolfgang Denk2014-11-07-1/+6
| | | | | | | | | | | | | | | | | | | | | | There are a number of places where U-Boot intentionally and legally accesses physical address 0x0000, for example when installing exception vectors on systems where these are located in low memory. Add "cppcheck-suppress nullPointer" comments to silence cppcheck where this is intentional and legal. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge git://git.denx.de/u-boot-tiTom Rini2014-11-07-166/+868
|\ \ | |/ |/|
| * omap3: cm-t3517: add LCD/DVI and splash supportIgor Grinberg2014-11-06-0/+44
| | | | | | | | | | | | | | Add support for splash screen on both DVI and SCF0403 LCD. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add Ethernet supportIgor Grinberg2014-11-06-0/+108
| | | | | | | | | | | | | | Add both EMAC and SMC911x support. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add USB supportIgor Grinberg2014-11-06-0/+120
| | | | | | | | | | | | | | | | | | Add both host and mUSB support. Currently, the selection between host USB and mUSB is done through the config file. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add basic board supportIgor Grinberg2014-11-06-0/+222
| | | | | | | | | | | | | | | | | | | | | | CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC. Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT, Analog audio codec, touch screen controller, LED. Add basic support including: LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * omap: hsmmc: assume cd gpio is active lowIgor Grinberg2014-11-06-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch the default CD GPIO polarity to active low. The current hsmmc driver assumption that the CD GPIO is active high, but in the real hardware, usually the opposite holds. The usual SD card socket has a mechanical switch which is grounded as soon as a card is inserted. Of course there might be some board logic which inverts the signal, but as far as current users are concerned, there is no such logic. Current U-Boot users either not using the CD functionality, or have a different way (e.g. external to SoC GPIO controller) for checking the card presence. This patch also brings the polarity assumption in line with the Linux kernel and adds appropriate comments. This patch also might spare issues once the TWL GPIO driver will be converted to the DM. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: move get_board_serial() fallbackIgor Grinberg2014-11-06-10/+12
| | | | | | | | | | | | | | | | | | | | The fallback is used for cases when CONFIG_SERIAL_TAG defined, but the eeprom is not used. The fallback is useful for more than one CompuLab board, so move it to a common location. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: move the SMC911x codeIgor Grinberg2014-11-06-43/+112
| | | | | | | | | | | | | | | | Extract the SMC911x initialization code to a common location where it can be reused by other compulab omap3 based boards. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: extract the splash code from boardIgor Grinberg2014-11-06-59/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The splash screen loading code can be reused by other compulab boards. For now extract it to a common location for further reuse. This also switches the splash code dependency from CONFIG_LCD to CONFIG_SPLASH_SCREEN as it should normally be. In addition this patch fixes the accidental dependency of the get_board_mem_timings() function on CONFIG_LCD, by just moving the splash code and leaving the above function intact. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: move the USB hub reset codeIgor Grinberg2014-11-06-11/+38
| | | | | | | | | | | | | | | | Extract the USB hub reset code to a common location where it can be reused by other compulab boards. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * compulab: refactor board revision handlingIgor Grinberg2014-11-06-25/+54
| | | | | | | | | | | | | | | | Move board revision handling code to a common location for further reuse. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * arm: am335x: net: pxm2: disable rgmii internal delay modeHeiko Schocher2014-11-06-1/+1
| | | | | | | | | | | | | | | | disable internal delay through gmii_sel register, as this is done in the ar8031 phy. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| * ks2_evm: board: remove sprintf for simple stringKhoronzhuk, Ivan2014-11-06-5/+2
| | | | | | | | | | | | There is no reason to sprintf simple string. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * ks2_evm: readme: add k2l evm board informationKhoronzhuk, Ivan2014-11-05-5/+15
| | | | | | | | | | | | | | | | Currently Keystone2 Lamar evm (K2L) board is added, so update Keystone2 readme file to have such one. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * board: k2l_evm: add network supportHao Zhang2014-11-05-1/+39
| | | | | | | | | | | | | | | | | | This patch adds network support code and enables keystone_net driver usage for k2l_evm evaluation board. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * am335x_evm: Convert NOR_BOOT to KconfigTom Rini2014-11-05-0/+8
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * am335x_evm: Add NOR to KconfigTom Rini2014-11-05-0/+7
| | | | | | | | | | | | | | Make enabling support for NOR (and describe where it's seen) be done via Kconfig. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'rmobile' of git://www.denx.de/git/u-boot-shTom Rini2014-11-05-8/+26
|\ \
| * | arm: rmobile: alt: Fix typo of SCIF idNobuhiro Iwamatsu2014-11-04-3/+3
| | | | | | | | | | | | | | | | | | | | | Alt board use SCIF2, not SCIF0. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Remove RAM address initializationNobuhiro Iwamatsu2014-11-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board info structure is not still set up, the setting of RAM address causes illegal access. Therefore the setting of RAM address is removed. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: koelsch: Remove RAM address initializationNobuhiro Iwamatsu2014-11-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board info structure is not still set up, the setting of RAM address causes illegal access. Therefore the setting of RAM address is removed. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Remove RAM address initializationNobuhiro Iwamatsu2014-11-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board info structure is not still set up, the setting of RAM address causes illegal access. Therefore the setting of RAM address is removed. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Add external RAM bootNobuhiro Iwamatsu2014-11-04-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: koelsch: Add external RAM bootNobuhiro Iwamatsu2014-11-04-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Add external RAM bootNobuhiro Iwamatsu2014-11-04-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0xB0000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Fix change of the CPU frequencyNobuhiro Iwamatsu2014-11-04-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The change of the CPU frequency is waited for until PLL0ST of the PLLECR is set to 1. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-05-17/+1339
|\ \ \ | |_|/ |/| |
| * | arm: mx6: cm_fx6: detect 1GB DRAM correctly on soloNikita Kiryanov2014-11-05-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 1GB DRAM configuration on mx6 solo uses 2 chip selects, but the code tests 1GB DRAM configuration as if it is all present on one chip select, and thus cannot see the full range of available memory. Refactor the check to detect 1GB DRAM correctly. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | arm: mx6: cm_fx6: change issd gpio orderNikita Kiryanov2014-11-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the order in which GPIOs are toggled in SATA init sequence to accomodate both SanDisk and Phison SSDs. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
generated by cgit v1.1 at 2024-12-23 13:59:12 +0000