summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeLines
* at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.Wu, Josh2012-09-01-6/+6
* arm:at91-boards: remove console_init_f where unnecessaryAndreas Bießmann2012-09-01-22/+0
* at91sam9263ek: remove unnecessary console_init_fAndreas Bießmann2012-09-01-3/+0
* arm : at91sam9x5 : fix a small bug for NANDBo Shen2012-09-01-0/+2
* fsl_esdhc: Remove cache snooping for i.MXBenoît Thébaudeau2012-09-01-17/+17
* MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NRStefano Babic2012-09-01-24/+24
* mx5:Use IMX_GPIO_NR macroAshok Kumar Reddy2012-09-01-20/+20
* efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's prod...Matt Sealey2012-09-01-25/+19
* efikamx: update to Efika MX Smarttop and Smartbook boardsMatt Sealey2012-09-01-375/+229
* efikamx: configure Smarttop PCBID and LED pads in DCD for convenienceMatt Sealey2012-09-01-0/+10
* efikamx: remove drive strength function and roll its functionality into the DCDMatt Sealey2012-09-01-101/+18
* efikamx: move and rename Efika MX directories and config files to prepare for...Matt Sealey2012-09-01-1/+1
* MX28: m28evk: Align SSP clock speedMarek Vasut2012-09-01-2/+2
* mx6qarm2:Use IMX_GPIO_NR macroAshok Kumar Reddy2012-09-01-2/+2
* imx27lite: update with gpio api change (v4)trem2012-09-01-3/+2
* mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'Otavio Salvador2012-09-01-4/+4
* mx53ard: Use IMX_GPIO_NR macroFabio Estevam2012-09-01-1/+1
* mx51evk: Use IMX_GPIO_NR macroFabio Estevam2012-09-01-3/+3
* mx53loco: Use IMX_GPIO_NR macroFabio Estevam2012-09-01-1/+1
* mx35: Fix broken pin definitionsBenoît Thébaudeau2012-09-01-2/+2
* MX: Set a common gpio.h for all i.MXStefano Babic2012-09-01-32/+32
* mx53evk: add boot_mode supportTroy Kisky2012-09-01-0/+13
* mx6qsabrelite: add boot_mode supportTroy Kisky2012-09-01-0/+14
* iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-01-0/+1
* mx35: Fix typo on EDIOBenoît Thébaudeau2012-09-01-2/+2
* tx25: Use generic gpio_* callsVikram Narayanan2012-09-01-16/+9
* mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador2012-09-01-1/+1
* SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-3/+3
* Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-464/+486
* EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-440/+1139
* SMDK5250: Add smdk5250-uboot-spl.ldsRajeshwari Shinde2012-09-01-0/+66
* SMDK5250: SPL: Define parametric board initializerRajeshwari Shinde2012-09-01-0/+69
* tegra20: move SDRAM param save to later in bootAllen Martin2012-09-01-0/+3
* tegra20: remove timer_init from SPL buildAllen Martin2012-09-01-0/+2
* tegra20: make board mkdir commands unconditionalAllen Martin2012-09-01-10/+0
* tegra20: rename tegra2 -> tegra20Allen Martin2012-09-01-28/+28
* ARM: add Raspberry Pi model B board, using BCM2835 SoCStephen Warren2012-09-01-0/+68
* u8500: Separating mmc config parameters from driverJohn Rigby2012-09-01-5/+130
* u8500: Enabling power to MMC device on AB8500 V2Mathieu J. Poirier2012-09-01-0/+5
* u8500: Moving processor-specific functions to cpu area.Mathieu J. Poirier2012-09-01-74/+1
* snowball: applying power to LAN and GBF controllersMathieu J. Poirier2012-09-01-0/+87
* snowball: Adding architecture dependent initialisationMathieu J. Poirier2012-09-01-2/+1
* u8500: Moving prcmu to cpu directoryMathieu J. Poirier2012-09-01-222/+2
* snowball: Add support for ux500 based snowball boardMathieu J. Poirier2012-09-01-0/+960
* davinci: enbw_cmc: change switch init behaviourHeiko Schocher2012-09-01-33/+69
* da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu2012-09-01-0/+41
* am335x evm: Enable support for spi0Tom Rini2012-09-01-0/+11
* am335x evm: Enable MMC1 pinmuxTom Rini2012-09-01-0/+16
* am335x evm: Initial support for AM335x GP EVM ProfilesTom Rini2012-09-01-4/+42
* sc_sps_1: Adjust board config to use 'mxs' SoC codeOtavio Salvador2012-09-01-4/+4
generated by cgit v1.1 at 2024-12-12 22:12:35 +0000