summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeLines
* mx35: Fix broken pin definitionsBenoît Thébaudeau2012-09-01-2/+2
* MX: Set a common gpio.h for all i.MXStefano Babic2012-09-01-32/+32
* mx53evk: add boot_mode supportTroy Kisky2012-09-01-0/+13
* mx6qsabrelite: add boot_mode supportTroy Kisky2012-09-01-0/+14
* iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-01-0/+1
* mx35: Fix typo on EDIOBenoît Thébaudeau2012-09-01-2/+2
* tx25: Use generic gpio_* callsVikram Narayanan2012-09-01-16/+9
* mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador2012-09-01-1/+1
* SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-3/+3
* Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-464/+486
* EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-440/+1139
* SMDK5250: Add smdk5250-uboot-spl.ldsRajeshwari Shinde2012-09-01-0/+66
* SMDK5250: SPL: Define parametric board initializerRajeshwari Shinde2012-09-01-0/+69
* tegra20: move SDRAM param save to later in bootAllen Martin2012-09-01-0/+3
* tegra20: remove timer_init from SPL buildAllen Martin2012-09-01-0/+2
* tegra20: make board mkdir commands unconditionalAllen Martin2012-09-01-10/+0
* tegra20: rename tegra2 -> tegra20Allen Martin2012-09-01-28/+28
* ARM: add Raspberry Pi model B board, using BCM2835 SoCStephen Warren2012-09-01-0/+68
* u8500: Separating mmc config parameters from driverJohn Rigby2012-09-01-5/+130
* u8500: Enabling power to MMC device on AB8500 V2Mathieu J. Poirier2012-09-01-0/+5
* u8500: Moving processor-specific functions to cpu area.Mathieu J. Poirier2012-09-01-74/+1
* snowball: applying power to LAN and GBF controllersMathieu J. Poirier2012-09-01-0/+87
* snowball: Adding architecture dependent initialisationMathieu J. Poirier2012-09-01-2/+1
* u8500: Moving prcmu to cpu directoryMathieu J. Poirier2012-09-01-222/+2
* snowball: Add support for ux500 based snowball boardMathieu J. Poirier2012-09-01-0/+960
* davinci: enbw_cmc: change switch init behaviourHeiko Schocher2012-09-01-33/+69
* da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu2012-09-01-0/+41
* am335x evm: Enable support for spi0Tom Rini2012-09-01-0/+11
* am335x evm: Enable MMC1 pinmuxTom Rini2012-09-01-0/+16
* am335x evm: Initial support for AM335x GP EVM ProfilesTom Rini2012-09-01-4/+42
* sc_sps_1: Adjust board config to use 'mxs' SoC codeOtavio Salvador2012-09-01-4/+4
* MX28: Add SchulerControl SC_SPS_1 platformMarek Vasut2012-09-01-0/+325
* MX28: Move the u-boot.bd info CPUDIR/SOCDIRMarek Vasut2012-09-01-42/+0
* vision2: do not overwrite the consoleFabio Estevam2012-09-01-2/+9
* mx51evk: do not overwrite the consoleFabio Estevam2012-09-01-1/+9
* MX5: mx53loco: do not overwrite the consoleStefano Babic2012-09-01-6/+6
* mxs: Reowork SPL to use 'mxs' prefix for methodsOtavio Salvador2012-09-01-4/+4
* mxs: prefix register structs with 'mxs' prefixOtavio Salvador2012-09-01-6/+6
* Add support for Bluegiga APX4 Development KitVeli-Pekka Peltola2012-09-01-0/+375
* at91: Add support for taskit AT91SAM9G20 boards.Markus Hubig2012-09-01-0/+382
* arm : Atmel : add at91sam9x5ek board supportBo Shen2012-09-01-0/+346
* OMAP3: fix DRAM size for IGEP-based boards.Enric Balletbò i Serra2012-09-01-6/+6
* am33xx: Rework pinmux functionsTom Rini2012-09-01-25/+35
* am33xx: Add support for TI AM335x StarterKit EVMTom Rini2012-09-01-0/+10
* am33xx: Remove board/ti/am335x/evm.cTom Rini2012-09-01-200/+1
* OMAP3: igep00x0: add SPL support for IGEP-based boardsJavier Martinez Canillas2012-09-01-68/+82
* OMAP3: igep00x0: Add config option to choose flash storage memoryJavier Martinez Canillas2012-09-01-0/+8
* am335x_evm: CPSW supportChandan Nath2012-09-01-0/+91
* am335x_evm: read the on-board EEPROMIlya Yanok2012-09-01-2/+70
* am33xx: pin mux defintions for CPSW switchChandan Nath2012-09-01-0/+47
generated by cgit v1.1 at 2024-12-24 01:05:48 +0000