summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitorsRobert Winkler2013-07-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | A little background is probably appropriate for this patch. Since "the beginning" of usage of the SABRE Lite and Nitrogen6x boards, DVI detection has been somewhat broken. Some (most) DVI monitors don't produce the "HPD" bit in the PHY_STAT0 register, but do show proper toggling of the RX_SENSE0..3 bits. Creating a new the bit-mask to include all five bits and modifying the 'hdmidet' command and internal detection routines allows these monitors to function properly in U-Boot. A related patch to our kernels allows things to work under Linux: https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4 Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6qsabresd: Add splash screen support via HDMIPardeep Kumar Singla2013-07-27-1/+63
| | | | Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com>
* mx6: Factor out common HDMI setup codePardeep Kumar Singla2013-07-27-77/+11
| | | | | | | Instead of duplicating HDMI setup code for every mx6 board, factor out the common code Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com> Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
* mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6xFabio Estevam2013-07-26-889/+0
| | | | | | | | | | mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the code duplication and only use the nitrogen6x source code to make board code maintainance easier. Tested booting a mainline device tree kernel on a mx6qsabrelite board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* arm: at91sam9n12: change EBI IO to high drive modeBo Shen2013-07-22-1/+1
| | | | | | | | | | | | As both the DDR SDRAM and NAND flash connect to EBI on at91sam9n12 and share the lower 8 bits data line. If use low drive of the data line, it will cause DDR data access corrupt in lower address, so change the data line to high drive mode This will fix the Linux kernel boot issue when use Lower address Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
* ddr cfg: DRAM_RESET needs 0x00020030Troy Kisky2013-07-20-1/+1
| | | | | | | | | | | | | | | | | The old value of 0x000e0030 will cause ethernet timeout issues on the sabrelite and possibly other boards using the KSZ9021. I have no explanation as to why. But this is a correct change, the TRM will be updated to show that 00b is the only valid setting for bits 19-18 of DRAM_RESET. My thanks go to Liu Hui(Jason) for this information. Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mpc85xx: Add gdsys ControlCenter Digital boardDirk Eibach2013-07-16-0/+2171
| | | | | | | | | | | | | | | | | The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC. It boots from SPI-Flash but can be configured to boot from SD-card for factory programming and testing. On board peripherals include: - 2x GbE - Lattice ECP3 FPGA connected via PCIe - mSATA RAID1 - USB host - DisplayPort video output - Atmel TPM Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Signed-off-by: Andy Fleming <afleming@freescale.com>
* arm:samsung:trats:fix: Restore proper orientation of TRATS's LCD panelŁukasz Majewski2013-07-16-9/+1
| | | | | | | | | | | | | | | | | | | | | | | Before setting: mipi_lcd_device.reverse_panel = 1, the Trats's LCD panel was flipped by 180 degrees. The flip was caused by following change: Exynos: Change get_timer() to work correctly SHA1: 3d00c0cb96ff93a929700b80d89cb905e5ab5315 This commit fixed udelay(), which is necessary (due to HW LCD controller oddity) for mipi-dsi correct operation. As a result the display orientation has been switched. As a follow up, the hwrevision() function has been removed, since it was used only in this particular place. Test HW: Trats Exynos4210 rev 0. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* PPC MPC83xx: Fix MPC8323ERDB build warningWolfgang Denk2013-07-15-1/+5
| | | | | | | | | | | | Fix: mpc8323erdb.c: In function 'mac_read_from_eeprom': mpc8323erdb.c:198:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de> cc: Timur Tabi <timur@tabi.org> cc: Kim Phillips <kim.phillips@freescale.com>
* Revert "MIPS: Jz4740: Add qi_lb60 board support"Tom Rini2013-07-15-175/+0
| | | | | | | | | | The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were licensed under the GPL v3 or later, and not v2 or later. As this is incompatible with the project, revert this board support until the responsible parties are available to re-license (if so desired) under GPL v2. Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-07-12-4311/+1060
|\ | | | | | | | | | | | | | | | | | | Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
| * ARM: tegra: enable LCD panel on VentanaStephen Warren2013-07-11-0/+32
| | | | | | | | | | Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: enable LCD panel on HarmonyStephen Warren2013-07-11-0/+39
| | | | | | | | | | Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114Jim Lin2013-07-11-0/+1
| | | | | | | | | | | | | | | | | | | | Tegra30 and Tegra114 are compatible except PLL parameters. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Tegra: FDT: Add USB EHCI function for T30/T114Jim Lin2013-07-11-0/+19
| | | | | | | | | | | | | | | | | | | | Add DT node for USB EHCI function. Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-07-10-4304/+138
| |\
| | * EXYNOS: Resolve the i2c compilation errorAmar2013-07-10-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch resolves the below mentioned compilation error of i2c driver for non-FDT case Compilation error: s3c24x0_i2c.c: In function 'board_i2c_init': s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use in this function) s3c24x0_i2c.c:544:18: note: each undeclared identifier is reported only once for each function it appears in s3c24x0_i2c.c:545:3: warning: implicit declaration of function Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Amar <amarendra.xt@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * EXYNOS: Move files from board/samsung to arch/armRajeshwari Shinde2013-07-05-4295/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch performs the following: 1) Convert the assembly code for memory and clock initialization to C code. 2) Move the memory and clock init codes from board/samsung to arch/arm 3) Creat a common lowlevel_init file across Exynos4 and Exynos5. Converted the common lowlevel_init from assembly to C-code 4) Made spl_boot.c and tzpc_init.c common for both exynos4 and exynos5. 5) Enable CONFIG_SKIP_LOWLEVEL_INIT as stack pointer initialisation is already done in _main. 6) exynos-uboot-spl.lds made common across SMDKV310, Origen and SMDK5250. TEST: Tested SD-MMC boot on SMDK5250 and Origen. Tested USB and SPI boot on SMDK5250 Compile tested for SMDKV310. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * EXYNOS4210: Configure GPIO for uartRajeshwari Shinde2013-07-05-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch configures the gpio values for UART on Origen and SMDKV310 using pinmux Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * EXYNOS: LDS file move to commonRajeshwari Shinde2013-07-05-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smdk5250-uboot-spl.lds is moved to common folder, so that it can be reused. It is renamed to exynos-uboot-spl.lds Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * SMDK5250: Remove reduntant codeRajeshwari Shinde2013-06-28-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enum boot_mode is defined twice once in spl.h and also in spl_boot.c, hence removing the same from spl_boot.c and including the header file. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * EXYNOS5: FDT: Add serial device node valuesRajeshwari Shinde2013-06-24-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the device node required for serial driver Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Adjust the starting MIF voltage to 1.05vBernie Thompson2013-06-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Exynos5250 silicon may require 1.05v on the MIF to be stable, so to be safe we can default to 1.05v instead of 1.00v. This can be set optimally later in the boot process by the kernel. The 0x6 value for 1.05v comes from the MAX77686 datasheet. Signed-off-by: Bernie Thompson <bhthompson@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Enable mmc for snowSimon Glass2013-06-21-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | Snow has an internal eMMC and an external SD card. Enable these in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-28-7/+68
| |\ \
| | * | m28evk: Move README file inside board directoryFabio Estevam2013-06-26-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Board specific READMEs should be located inside the respective board directory. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | mx28evk: Move README file inside board directoryFabio Estevam2013-06-26-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | Board specific READMEs should be located inside the respective board directory. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | imx: Add support for the SabreSD shipped with i.MX6DLPierre Aubert2013-06-26-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SabreSD platform is available with i.MX6Q or i.MX6DL. This patch adds the support of the i.MX6DL. The config file and the board directory are renamed to remove the reference to the MX6Q. Signed-off-by: Pierre Aubert <p.aubert@staubli.com> CC: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | Add support for Wandboard QuadTapani Utriainen2013-06-26-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Quad version of Wandboard; fix compile warning resulting from having 2G of memory. Signed-off-by: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | pxa: add support for palmtreo680 boardMike Dunn2013-06-22-0/+763
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Palm Treo 680 smartphone. A quick overview of u-boot implementation on the treo 680... The treo 680 has a Diskonchip G4 nand flash chip. This device has a 2k region that maps to the system bus at the reset vector in a NOR-like fashion so that it can be used as the boot device. The phone is shipped with this 2k region configured as write-protected (can't be modified) and programmed with an initial program loader (IPL). At power-up, this IPL loads the contents of two flash blocks to SDRAM and jumps to it. The capacity of the two blocks is not large enough to hold all of u-boot, so a u-boot SPL is used. To conserve flash space, these two blocks and the necessary number of subsequent blocks are programmed with a concatenated spl + u-boot image. That way, the IPL will also load a portion of u-boot proper, and when the spl runs, it relocates the portion of u-boot that the IPL has already loaded, and then resumes loading the remaining part of u-boot before jumping to it. The default_environment is used (CONFIG_ENV_IS_NOWHERE) because I didn't think that having a writable environment was worth the cost of a flash block, although adding it would be straightforward. I abuse the CONFIG_EXTRA_ENV_SETTINGS option to specify the usbtty for the console (CONFIG_SYS_CONSOLE_IS_IN_ENV). Support for the LCD is included, but currently it is only useful for displaying the u-boot splash screen. But if u-boot is built without the usbtty console, it does display the auto-boot progress nicely. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
* | | | omap: cm_t35: Fix cm_t35 for weak splash_screen_prepareRobert Winkler2013-07-01-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-74xx-7xxTom Rini2013-06-27-3/+8
|\ \ \ \
| * | | | PPC 74xx_7xx: Fix build warnings for ELPPC boardWolfgang Denk2013-06-27-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: misc.c: In function 'misc_init_r': misc.c:210:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] misc.c:211:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] misc.c:212:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | cros: exynos: enable cros-ec for smdk5250Hung-ying Tyan2013-06-26-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch initiates cros-ec in board_init() to enable it for smdk5250. This patch depends on the patch in the MMC series that brings in exynos5-dt.c. Refer to http://patchwork.ozlabs.org/patch/240084. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | | | | cros: exynos: add cros-ec device nodes to exynos5250-snow.dtsHung-ying Tyan2013-06-26-0/+81
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds cros-ec related device nodes to exynos5250-snow.dts. It also adds a gpio node to exynos5250.dtsi. Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2013-06-24-0/+36
|\ \ \ \
| * | | | ARM: at91sam9n12: add network support with ksz8851_16mllBo Shen2013-06-24-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add network support with ksz8851_16mll on at91sam9n12ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini2013-06-24-23/+27
|\ \ \ \ \ | |/ / / / |/| | | |
| * | | | ac14xx: re-order the recovery condition checksGerhard Sittig2013-06-24-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-order the conditions which make the recovery system startup: combine those conditions which were explicitly initiated (key press, software request) and those which post-process error conditions (installer issues) Signed-off-by: Gerhard Sittig <gsi@denx.de>
| * | | | ac14xx: minor improvement in diagnosticsGerhard Sittig2013-06-24-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - minor rewording of diagnostics output - make diagnostics optional and off by default Signed-off-by: Gerhard Sittig <gsi@denx.de>
| * | | | ac14xx: cleanup comments in the board supportGerhard Sittig2013-06-24-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix typos, minor rephrasing, remove obsolete notes and TODO items Signed-off-by: Gerhard Sittig <gsi@denx.de>
| * | | | ac14xx: fix a potential NULL deref in diagnosticsGerhard Sittig2013-06-24-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | getenv() immediately after setenv() may perfectly legally return NULL, so make sure to not deference an invalid pointer when creating diagnostic output Signed-off-by: Gerhard Sittig <gsi@denx.de>
* | | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-06-22-600/+976
|\ \ \ \ \ | | |/ / / | |/| | |
| * | | | arm: make __rel_dyn_{start, end} compiler-generatedAlbert ARIBAUD2013-06-21-10/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is only done where needed: some linker scripts may contain relocation symbols yet remain unchanged. __rel_dyn_start and __rel_dyn_end each requires its own output section; putting them in relocation sections changes their flags and breaks relocation. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * | | | arm: make __image_copy_{start, end} compiler-generatedAlbert ARIBAUD2013-06-21-5/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is only done where needed: some linker scripts may contain __image_copy_{start,end} yet remain unchanged. Also, __image_copy_end needs its own section; putting it in relocation sections changes their flags and makes relocation break. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * | | | remove all references to .dynsymAlbert ARIBAUD2013-06-21-41/+6
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discard all .dynsym sections from linker scripts Remove all __dynsym_start definitions from linker scripts Remove all __dynsym_start references from the codebase Note: this touches include/asm-generic/sections.h, which is not ARM-specific, but actual uses of __dynsym_start are only in ARM, so this patch can safely go through the ARM repository. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * | | net2big_v2: initialize LEDs at startupSimon Guinot2013-06-20-7/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows to configure the net2big_v2 LEDs at startup (through the GPIO extension bus). The front blue LED is enabled and the SATA rear LEDs are configured to blink in relation with the SATA activity. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
| * | | LaCie/common: add support for the CPLD GPIO busSimon Guinot2013-06-20-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the CPLD GPIO bus found on some LaCie boards (as the 2Big/5Big Network v2 and the 2Big NAS). This parallel GPIO bus exposes two registers (address and data). Each of this register is made up of several dedicated GPIOs. An extra GPIO is used to notify the CPLD that the registers have been updated. Mostly this bus is used to configure the LEDs on LaCie boards. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
| * | | net2big_v2: initialize I2C fan at startupSimon Guinot2013-06-20-1/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch ensures minimal cooling for the net2big_v2 by automatically starting the I2C fan (GMT G762) at low speed (2800 RPM). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-19-167/+90
| |\ \ \
generated by cgit v1.1 at 2024-12-26 10:01:45 +0000