summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* imx:mx6slevk implement power init boardPeng Fan2015-02-23-0/+42
| | | | | | | | | | | | | | | | | | | | Implement power_init_board and related I2C interface configuration. After adding this, uboot can successfully detect and configure pmic. " U-Boot 2015.01-00281-ge29eddf (Feb 12 2015 - 09:24:01) CPU: Freescale i.MX6SL rev1.0 at 396 MHz Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 " Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* board: tbs2910: Gate clock when switching async clock muxesSoeren Moch2015-02-23-12/+16
| | | | | | | | | | | According to the i.MX6Q Reference Manual, clocks must be gated when switching input clocks of async clock muxes. So use clock gates. Avoid ldb_di0_ipu clock, because there is no clock gate for this signal. There have never been any complaints about problems with the old code, but the new approach is in line with the recommendations in the manual. Signed-off-by: Soeren Moch <smoch@web.de>
* nitrogen6x: set environment variable reset_causeEric Nelson2015-02-17-0/+1
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-02-13-9620/+1624
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2015-02-10-2/+141
| |\
| | * x86: Add basic Intel Galileo board supportBin Meng2015-02-06-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | New board/intel/galileo board directory with minimum codes, plus board dts, defconfig and configuration files. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| | * x86: Add support for Intel Minnowboard MaxSimon Glass2015-02-06-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a relatively low-cost x86 board in a small form factor. The main peripherals are uSD, USB, HDMI, Ethernet and SATA. It uses an Atom 3800 series CPU. So far only the dual core 2GB variant is supported. This uses the existing FSP support. Binary blobs are required to make this board work. The microcode update is included as a patch (all 3000 lines of it). Change-Id: I0088c47fe87cf08ae635b343d32c332269062156 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| | * x86: Rename MMCONF_BASE_ADDRESS and make it common across x86Simon Glass2015-02-05-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This setting will be used by more than just ivybridge so make it common. Also rename it to PCIE_ECAM_BASE which is a more descriptive name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-02-10-0/+170
| |\ \
| | * | ARM: atmel: sama5d4_xplained: enable spl supportBo Shen2015-02-07-0/+85
| | | | | | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com>
| | * | ARM: atmel: sama5d4ek: enable SPL supportBo Shen2015-02-07-0/+85
| | |/ | | | | | | | | | | | | | | | | | | The sama5d4ek support boot up from NAND flash, SD/MMC card and also the SPI flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2015-02-10-0/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: include/splash.h Signed-off-by: Tom Rini <trini@ti.com>
| | * | lcd: dt: extract simplefb supportNikita Kiryanov2015-02-10-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now have api functions that can support compiling simplefb code as its own module. Since this code is not part of the display functionality, extract it to its own file. Raspberry Pi is updated to accommodate the changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-02-10-155/+1672
| |\ \
| * \ \ Merge branch 'microblaze' of git://git.denx.de/u-boot-microblazeTom Rini2015-02-09-0/+46
| |\ \ \
| | * | | microblaze: Move architecture to use generic board initMichal Simek2015-02-09-0/+46
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | Merge git://git.denx.de/u-boot-arcTom Rini2015-02-09-11/+0
| |\ \ \
| | * | | arc: add selection of endianess in KconfigAlexey Brodkin2015-02-09-11/+0
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features. It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * | | arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR supportStefan Roese2015-02-06-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following compilation warning for maxbcm: Building maxbcm board... text data bss dec hex filename 160075 6596 38240 204911 3206f ./u-boot board/maxbcm/maxbcm.c: In function 'reset_phy': board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable] u16 reg; ^ board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable] u16 devadr = CONFIG_PHY_BASE_ADDR; ^ Additionally support Spansion SPI NOR flash is added. With larger SPI device support via the CONFIG_SPI_FLASH_BAR define. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-BootStefan Roese2015-02-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SPL support to the db-mv784mp-gp eval board. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: maxbcm: Enable SPL to include DDR training code into U-BootStefan Roese2015-02-06-3/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SPL support to the maxbcm MV78460 based board. Including the fixed DDR configuratrion needed for the DDR training code. And the the serdes PHY init code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: mvebu: Placeholder bin_hdr file can now be removedStefan Roese2015-02-06-34/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | With this patchset the Marvell bin_hdr (DDR training) code is intergrated into mainline U-Boot. We can remove the placeholder file again, which was only introduced to make U-Boot compile and link again. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-02-02-21/+5
| |\ \
| | * | OMAP3: igep00x0: Fix boot hang and add support for status LED.Enric Balletbo i Serra2015-01-29-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the STATUS_LED APIs for indicating a boot progress instead of show_boot_progress. This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3: Move to driver model for GPIO and serial). After that commit the board doesn't boot. Looks like the problem is the gpio_request call inside the function show_boot_progress. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2015-02-02-290/+361
| |\ \ \
| | * | | sunxi: dram: Support more sun[457]i dram parameters in KconfigSiarhei Siamashka2015-02-02-3/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows to configure all the important DRAM parameters in Kconfig. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | sunxi: dram: Optionally use standard JEDEC timings for sun[457]iSiarhei Siamashka2015-02-02-4/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to the current Android magic settings, allow to optionally use DDR3 timing parameters, which are tailored for different clock frequencies and JEDEC speed bins. This should improve reliability and performance. Adding '+S:CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H=y' to the board defconfig allows to use timings, which are calculated for the DDR3-1066F speed bin. A lot of DDR3 chips, which are used in real Allwinner based devices, support DDR3-1066F speed bin timings. And adding '+S:CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y' should work with any DDR3 chips, because this targets the slowest JEDEC speed bins. The vendor magic values are still used by default for DRAM, but board maintainers now have more flexibility in DRAM timings selection. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | sunxi: video: Force h/vsync active high when using ext. vga dac on some boardsHans de Goede2015-02-02-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On both my A13-OLinuxIno and my A13-OLinuxIno-Micro, the vga output gives an unstable image when active low v or hsync is used. The problem seems to be specific to the OLinuxIno A13 (normal & micro) boards. I've just looked up the schematics and they use an opendrain driver for the vga sync lines, and with sync pulses it is the logical high->low edge of the pulse which counts for the timing, which with an active low sync is being driven by the pull-up, and that simply seems to not drive it hard enough to get a stable image. So force v and hsync active high on these boards. independent of what the modeline says. This fixes the unstable image. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | sunxi: Add Inet 86VS supportMichal Suchanek2015-02-02-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | sunxi: TZX-Q8-713B7 supportPaul Kocialkowski2015-02-02-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | sunxi: Add Linksprite_pcDuino3_Nano board / defconfigAdam Sampson2015-02-02-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for GMAC to work reliably at gigabit speeds. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Signed-off-by: Adam Sampson <ats@offog.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | sunxi: MAINTAINERS: sort entries alphabeticallyHans de Goede2015-02-02-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep all entries except for the monster entry at the top alphabetically sorted. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| | * | | sunxi: Remove CONFIG_TARGET_FOO for sun5i and sun7i boardsHans de Goede2015-02-02-82/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_TARGET_FOO was only used in board/sunxi/Makefile to select the dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some special handling of the bananapi/bananapro (both sun7i), all sun5i and sun7i boards have been moved over to using a single dram_sun5i_autoconfig file, and the tx clk delay handling for the Banana boards now has its own Kconfig. IOW nothing is using CONFIG_TARGET_FOO anymore, so remove it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig optionHans de Goede2015-02-02-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And use this to set the GMAC Transmit Clock Delay Chain value on Banana boards, rather then keying of CONFIG_TARGET_FOO. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | | sunxi: Convert sun5i boards to use auto dram configurationHans de Goede2015-02-02-169/+4
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we've separate detailed dram settings for all sun5i boards, this moves them over to using auto dram configuration so that we can get rid of all the per board dram_foo.c files. This has been tested on a A10s-Olinuxino, A13-Olinuxino, A13-OlinuxinoM, mk802-a10s and r7-tv-dongle board. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | Merge branch 'patman' of git://git.denx.de/u-boot-x86Tom Rini2015-01-31-2/+2
| |\ \ \
| | * | | sandbox: Fix README to indicate that vendor name is unsetSimon Glass2015-01-30-2/+2
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This brings in a additional small fix which was missed in a recent update to the README. Suggested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2015-01-30-0/+20
| |\ \ \
| | * | | malta: delay after resetPaul Burton2015-01-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reset isn't instant, so delay to give it a chance. Otherwise we go on to print a failure message before resetting anyway. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| | * | | malta: IDE supportPaul Burton2015-01-29-0/+19
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds IDE support to the MIPS Malta board. The IDE controller is enabled after probing the PCI bus and otherwise just makes use of U-boot generic IDE support. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2015-01-30-38/+26
| |\ \ \
| | * | | odroid u3: enable dm i2c supportPrzemyslaw Marczak2015-01-29-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables CONFIG_DM_I2C and also CONFIG_DM_I2C_COMPAT. The last one should be removed when the dm pmic framework will be finished. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com>
| | * | | Export redesignMartin Dorwig2015-01-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this is an atempt to make the export of functions typesafe. I replaced the jumptable void ** by a struct (jt_funcs) with function pointers. The EXPORT_FUNC macro now has 3 fixed parameters and one variadic parameter The first is the name of the exported function, the rest of the parameters are used to format a functionpointer in the jumptable, the EXPORT_FUNC macros are expanded three times, 1. to declare the members of the struct 2. to initialize the structmember pointers 3. to call the functions in stubs.c Signed-off-by: Martin Dorwig <dorwig@tetronik.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (resending to the list since my tweaks are not quite trivial)
| | * | | dm: i2c: Provide an offset length parameter where neededSimon Glass2015-01-29-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than assuming that the chip offset length is 1, allow it to be provided. This allows chips that don't use the default offset length to be used (at present they are only supported by the command line 'i2c' command which sets the offset length explicitly). Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
| | * | | dm: i2c: Rename driver model I2C functions to permit compatibilitySimon Glass2015-01-29-16/+16
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a dm_ prefix to driver model I2C functions so that we can keep the old ones around. This is a little unfortunate, but on reflection it is too difficult to change the API. We can undo this rename when most boards and drivers are converted to use driver model for I2C. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | vexpress64: support the Juno Development PlatformLinus Walleij2015-01-30-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Juno Development Platform is a physical Versatile Express device with some differences from the emulated semihosting models. The main difference is that the system is split in a SoC and an FPGA where the SoC hosts the serial ports at totally different adresses. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONSLinus Walleij2015-01-30-1/+14
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Versatile Express ARMv8 semihosted FVP platform is still using the legacy CONFIG_SYS_EXTRA_OPTIONS method to configure some compile-time flags. Get rid of this and create a Kconfig entry for the FVP model, and a selectable bool for the semihosting library. The FVP subboard is now modeled as a target choice so we can eventually choose between different ARMv8 versatile express boards (FVP, base model, Juno...) this way. All dependent symbols are updated to reflect this. The 64bit Versatile Express board symbols are renamed VEXPRESS64 so we have some chance to see what is actually going on. Tested on the FVP fast model. Acked-by: Steve Rae <srae@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-01-26-14/+44
| |\ \
| | * | ARM: atmel: sama5d4_xplained: add option for usb ethernet gadgetBo Shen2015-01-19-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the option for USB Ethernet gadget based on atmel usb device. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| | * | ARM: atmel: sama5d4ek: add option for usb ethernet gadgetBo Shen2015-01-19-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the option for USB Ethernet gadget based on atmel usb device. Signed-off-by: Bo Shen <voice.shen@atmel.com>
generated by cgit v1.1 at 2024-09-19 10:03:31 +0000