summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* tegra: nyan-big: Allow TPM on I2CSimon Glass2015-07-27-4/+4
| | | | | | | | | | | Enable the I2C3 pins so that the TPM can be used. Note: There is an DP change also, caused by running board-to-uboot.py script in the latest tegra-pinmux-script tree. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-07-25-38/+19
|\
| * sunxi: musb: Move musb config and platdata to the sunxi-musb glueHans de Goede2015-07-25-26/+2
| | | | | | | | | | | | | | | | | | Move the musb config and platdata to the sunxi-musb glue, which is where it really belongs. This is preparation patch for adding device-model support for the sunxi-musb-host code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: usb-phy: Add support for reading otg id pin valueHans de Goede2015-07-25-0/+7
| | | | | | | | | | | | | | | | Add support for reading the id pin value of the otg connector to the usb phy code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: spl: Remove redundant check from `board_mmc_init` for signatureDaniel Kochmański2015-07-24-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the boot signature check from board_mmc_init() in spl mode, as it is already done in spl_boot_device() in this case, and update the comments to reflect this. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Disable the check only for SPL instead of always] Acked-by: Hans De Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański2015-07-24-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extracts checking for valid SD card "eGON.BT0" signature from `board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`. Buffer for mmc sector is allocated and freed at runtime. `panic` is triggered on malloc failure. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge git://git.denx.de/u-boot-usbTom Rini2015-07-24-3/+43
|\ \ | |/ |/|
| * implement Fastboot via USB OTG on bcm28155_ap boardsJiandong Zheng2015-07-22-0/+40
| | | | | | | | | | Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
| * usb: USB download gadget and functions config options coherent namingPaul Kocialkowski2015-07-22-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | This introduces a coherent scheme for naming USB download gadget and functions config options. The download USB gadget config option is moved to CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each function's config option is moved to a CONFIG_USB_FUNCTION_ prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
* | arm: mvebu: db-88f6820: Add SPL support with DDR init codeStefan Roese2015-07-23-1/+50
| | | | | | | | | | | | | | | | | | | | This patch adds SPL support for the Marvell DB-88F6820-GP board. With this change, the bin_hdr from the original Marvell U-boot is not needed any more on this board. The sources from bin_hdr (SERDES/PHY and DDR setup) are now integrated in mainline U-Boot. And this patch enables them for this board. Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directoryStefan Roese2015-07-23-2/+2
|/ | | | | | | | | With the upcoming addition of the Armada 38x SPL support, which is not compatible to the Armada XP SERDES init code, we need to introduce a new directory infrastructure. So lets move the AXP serdes init code into a new directory. This way the A38x code can be added in a clean way. Signed-off-by: Stefan Roese <sr@denx.de>
* armv8/ls2085ardb: DSPI pin muxing configure through QIXIS CPLDHaikun.Wang@freescale.com2015-07-20-20/+39
| | | | | | | | | | | | | DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS CPLD to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085aqds: DSPI pin muxing configure through QIXISHaikun Wang2015-07-20-0/+48
| | | | | | | | | | | | | DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS FPGA to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arm/ls102xa: Add little-endian mode support for audio IPsAlison Wang2015-07-20-0/+6
| | | | | | | | As SCFG_ENDIANCR register is added to choose little-endian or big-endian for audio IPs on Rev2.0 silion, little-endian mode is selected. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* board/ls2085rdb: Export functions for standalone AQ FW load appsPrabhakar Kushwaha2015-07-20-0/+15
| | | | | | | | | Export functions required by Aquntia PHY firmware load application. functions are memset, strcpy, mdelay, mdio_get_current_dev, phy_find_by_mask, mdio_phydev_for_ethname and miiphy_set_current_dev Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvrPrabhakar Kushwaha2015-07-20-3/+3
| | | | | | | | | | | | The agreed split of the top of memory is 256M for debug server and 256M for MC. This patch implements the split. In addition, the MC mem must be 512MB aligned, so the amount of memory to hide must be 512MB to achieve that alignment. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085a: Expose all DDR region(s) to LinuxBhupesh Sharma2015-07-20-18/+68
| | | | | | | | | | | | | This patch allows u-boot to expose the complete DDR region(s) to Linux (after subtracting the memory hidden via MEM_TOP_HIDE mechanism). This allows the u-boot to support the 48-bit VA support provided by ARM64 Linux in flavors 3.18 and above, by passing the appropriate 'memory' DTS nodes. Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085ardb: Fix SPD address error on early boardsYork Sun2015-07-20-0/+19
| | | | | | | | | Board rev C and earlier has duplicated SPD address on 2nd DDR controller slots. It is fixed on rev D and later. SPD addresses need to be updated accordingly. Signed-off-by: York Sun <yorksun at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
* armv8/ls2085a: Avoid hard-coding for board name printPrabhakar Kushwaha2015-07-20-2/+9
| | | | | | | | | | | LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE, LS2080A, LS2085AE and LS2085A personlities. Instead of hard-coding, board name should change as per selected personality. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085RDB: Update board version print logicPrabhakar Kushwaha2015-07-20-1/+1
| | | | | | | | | | As per updated board document, no need to substract 1 from arch[BRD] bit field. Default value + 'A' represents the board revision. So update board version print logic to reflect the same. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* board/fsl/common: Fix eeprom system version endiannessJaiprakash Singh2015-07-20-4/+4
| | | | | | | | | | | | SYSTEM ID EPPROM always store SYSTEM version info in big endian format. SoC with ARM or PowerPC core should read/write version info from eeprom in BIG endian format. So use cpu-specific APIs to read SYSTEM version. Signed-off-by: Jaiprakash Singh <b44839 at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085qds: Update SFP TX bit as "0" to enable XFIPrabhakar Kushwaha2015-07-20-1/+1
| | | | | | | | FPGA BRDCFG9[SFP_TX] should be clear in order to enable XFI ports. Signed-off-by: Dai Haruki <Dai.Haruki at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085aqds: Add support of SerDes protocol 0x49Prabhakar Kushwaha2015-07-20-0/+2
| | | | | | | | | | SerDes Protocol 0x49 enables 4 SGMII, PEX4, SATA1 and SATA2. Add support of 0x49 SerDes protocol to enable 4SGMII on slot4 of ls2085aqds platform. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085ardb: add hwconfig setting for eSDHCYangbo Lu2015-07-20-0/+36
| | | | | | | | | Add hwconfig setting for eSDHC since it shares some pins with other IP block. Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085ardb: Add eth & phy firmware loading supportPrabhakar Kushwaha2015-07-20-14/+134
| | | | | | | | | | Add support for board eth initialization and support for loading phy firmware. PHY firmware needs to be loaded from board_eth_init() because all the MACs are not initialized by ldpaa_eth driver. Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-07-15-2/+0
|\
| * x86: Remove MARK_GRAPHICS_MEM_WRCOMBBin Meng2015-07-14-2/+0
| | | | | | | | | | | | | | | | MARK_GRAPHICS_MEM_WRCOMB is not referenced anywhere in the code, hence remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-07-14-0/+8
|\ \ | |/ |/|
| * stv0991: configure clock & pad muxing for qspiVikas Manocha2015-07-03-0/+8
| | | | | | | | | | | | | | | | stv0991 has cadence qspi controller for flash interfacing, this patch configures the device pads & clock for the controller. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
* | Merge git://git.denx.de/u-boot-samsungTom Rini2015-07-10-0/+1
|\ \
| * | arm: adds the status info for odroid-xu3Minkyu Kang2015-07-10-0/+1
| | | | | | | | | | | | | | | | | | Adds the 'F:' entry for the board's defconfig Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge git://git.denx.de/u-boot-marvellTom Rini2015-07-10-0/+6
|\ \ \
| * | | arm: mvebu: db-88f6820-gp: Add MAINTAINERS fileStefan Roese2015-07-10-0/+6
| |/ / | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* | | stm32f4: fix MAINTAINERS fileAntonio Borneo2015-07-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When "scripts/get_maintainer.pl" parses "board/.../MAINTAINERS", it uses the line containing board name as delimiter. Without this line, the script happily mixes the lines from current board MAINTAINERS file with lines from another file. Fix it by adding a reasonable board name. Tested by comparing output of: cat board/st/stm32f429-discovery/MAINTAINERS ./scripts/get_maintainer.pl -f board/st/stm32f429-discovery Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: u-boot@lists.denx.de To: Kamil Lulko <rev13@wp.pl> Cc: Tom Rini <trini@konsulko.com>
* | | arm: baltos: drop I2C speed to 1000 HzYegor Yefremov2015-07-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | This action is need to make I2C communication with PMIC stable for low temperature. Print current I2C speed in SPL for visual control. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | | ARM: beagle_x15: prevent DCAN1 _wait_target_disable failure in kernelRoger Quadros2015-07-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If board is booted with transitions happening on DCAN1 pins then the following warning is seen in the kernel at boot when the hwmod layer initializes. "omap_hwmod: dcan1: _wait_target_disable failed" This is because DCAN1 module's SWAKEUP mechanism is broken and it fails to correctly turn OFF if it sees a transition on the DCAN1 pins. Suggested workaround is to keep DCAN1 pins in safe mode while enabling/disabling DCAN1 module. The hwmod layer enables and disables all modules at boot and we have no opportunity to put the DCAN1 pins in safe mode at that point. DCAN1 is not used by u-boot so it doesn't matter to it if these pins are in safe mode. The kernel driver correctly configures the right mode when DCAN1 is active. Signed-off-by: Roger Quadros <rogerq@ti.com> [trini: s/PULLUP/PULL_UP/ based on DRA7xx EVM version of this patch] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | ARM: DRA7-evm: prevent DCAN1 _wait_target_disable failure in kernelRoger Quadros2015-07-08-2/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If board is booted with transitions happening on DCAN1 pins then the following warning is seen in the kernel at boot when the hwmod layer initializes. "omap_hwmod: dcan1: _wait_target_disable failed" This is because DCAN1 module's SWAKEUP mechanism is broken and it fails to correctly turn OFF if it sees a transition on the DCAN1 pins. Suggested workaround is to keep DCAN1 pins in safe mode while enabling/disabling DCAN1 module. The hwmod layer enables and disables all modules at boot and we have no opportunity to put the DCAN1 pins in safe mode at that point. DCAN1 is not used by u-boot so it doesn't matter to it if these pins are in safe mode. The kernel driver correctly configures the right mode when DCAN1 is active. Signed-off-by: Roger Quadros <rogerq@ti.com>
* | ARM: DRA72x: fix io delay calibration for ethernetMugunthan V N2015-07-07-24/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | we currently use in-development IODelay values for DRA72x which are proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet Phy over RGMII. The PHY characteristics and routing choices made on the EVM, make the current iodelay values fail ethernet communication. Instead, we need to choose custom values for DRA72x-evm specifically designed for the PHY and routing on the platform for ethernet to function. Cc: Nishanth Menon <nm@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2015-07-07-0/+14
|\ \
| * | board: baltos - add maintainer informationYegor Yefremov2015-07-07-0/+6
| | | | | | | | | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
| * | board: am43xx: Add maintainer informationLokesh Vutla2015-07-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | am43xx_evm_ethboot/usbhost_boot_defconfig entries are missing in MAINTAINER file. Adding entries for them. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | cairo: add missing MAINTAINERS fileAlbert ARIBAUD \(3ADEV\)2015-07-07-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the following two warnings from buildman: WARNING: no status info for 'cairo' WARNING: no maintainers for 'cairo' Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-07-05-0/+6
|\ \ \
| * | | sunxi: Add Sinlinx SinA33 defconfigChen-Yu Tsai2015-07-05-0/+6
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO and GPIO headers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-07-03-2/+60
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: configs/tbs2910_defconfig configs/tqma6q_mba6_mmc_defconfig configs/tqma6q_mba6_spi_defconfig configs/tqma6s_mba6_mmc_defconfig configs/tqma6s_mba6_spi_defconfig include/configs/mx6_common.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * | arm: imx6: tqma6: implement KConfig baseboard selectionMarkus Niebel2015-06-27-0/+14
| | | | | | | | | | | | | | | | | | | | | this finally removes the need for extra settings in defconfig Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | arm: imx6: tqma6: boot device selection via KconfigMarkus Niebel2015-06-27-0/+19
| | | | | | | | | | | | Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | arm: imx6: tqma6: implement IMX_CONFIG with KconfigMarkus Niebel2015-06-27-0/+4
| | | | | | | | | | | | | | | | | | | | | Now that we have the Kconfig based CPU type selection, use this to fill the IMX_CONFIG automatically Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | arm: mx6: tqma6: CPU type selection via KconfigMarkus Niebel2015-06-27-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the first patch to remove the CONFIG_SYS_EXTRA_OPTIONS. This patch implements CPU type selection from Kconfig. Further Kconfig stuff is added later. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | mx6cuboxi: Fix boot of hummingboard dual-liteFabio Estevam2015-06-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hummingboard dual-lite is picking the incorrect calibration structure. Fix it so that it can boot. While at it, also fix p1_mpdgctrl1 register to match Solid-run's setting. Reported-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Andrei Gherzan <andrei@gherzan.ro>