summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeLines
* MLK-13749 mx7ulp_arm2: Enable MX7ULP 10x10 ARM2 board buildYe Li2017-01-12-0/+299
* MLK-13602-3 mx6ullevk/arm2: Enable module fuse checking for mx6ull boardsYe Li2016-12-14-0/+11
* MLK-13586-2 mx7d_arm2/sabresd: Update ddr3 script to V2.0 for Bank interleaveYe Li2016-12-12-109/+155
* MLK-13586-1 mx7d_arm2: Update lpddr3 script to V2.0 for Bank interleaveYe Li2016-12-12-60/+88
* MXSCM-237 mx6dqscm: qwks: add support for qwks rev3Juan Gutierrez2016-12-08-1/+22
* MXSCM-236 mx6dqscm: adjust some ddr calibration parametersJuan Gutierrez2016-12-08-13/+16
* MLK-13546 mx7ulp_arm2: Add validation board supportYe Li2016-12-02-0/+683
* MLK-13551: mx6ull: evk: lpddr2: add pre charge command allAdrian Alonso2016-12-01-0/+3
* MLK-13451-2: mx6ul: arm2: lpddr2: add pre charge command allAdrian Alonso2016-12-01-0/+3
* MLK-13451-1: mx6ul: evk: lpddr2: add pre charge command allAdrian Alonso2016-12-01-0/+3
* MLK-13540-2: mx6sx: arm2: lpddr2: add pre charge command allAdrian Alonso2016-12-01-0/+6
* MLK-13540-1: mx6sx: arm2: lpddr2: add pre charge command allAdrian Alonso2016-12-01-0/+6
* MLK-13539: mx6sl: evk: lpddr2: add pre charge command allAdrian Alonso2016-12-01-0/+3
* MXSCM-222 usb: fix swbst_mode to properly power usbJuan Gutierrez2016-12-01-1/+1
* MXSCM-212: mx6dqscm: usb: fix usb_otg_id iomux pad settingsJuan Gutierrez2016-12-01-0/+8
* MLK-13525-2 mx7ulp_evk: Add plugin boot supportYe Li2016-11-25-2/+229
* MLK-13509 mx7ulp_evk: Update DDR script to v1.2Ye Li2016-11-25-1/+4
* MLK-13508-2 mx6sllarm2: Update DDR script to v2.3Ye Li2016-11-24-9/+11
* MLK-13508-1 mx6sllevk: Update DDR script to v2.2Ye Li2016-11-24-4/+5
* MLK-13450-19 imx: mx7ulp_evk: Add EVK boards support codesYe Li2016-11-22-0/+435
* MLK-13499 imx6sll: add epdc splash screen supportRobby Cai2016-11-21-0/+442
* MLK-13440-4 warp: Replace CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT by using vs18_en...Ye Li2016-11-08-1/+1
* MLK-13440-3 mx6sll_arm2: Update USDHC2 parameter for using 1.8V I/OYe Li2016-11-08-6/+2
* MLK-13440-2 mx6sllevk: Update USDHC2 parameter for using 1.8V I/OYe Li2016-11-08-6/+2
* MLK-13405-4 mx6sll-arm2: change the eMMC reset pad to 1.8vHaibo Chen2016-11-04-2/+6
* MLK-13405-3 mx6sll-evk: change the eMMC reset pad to 1.8vHaibo Chen2016-11-04-2/+6
* MLK-13407: mx6qarm2: mt128x64mx3 2: add init pre charge all commandAdrian Alonso2016-10-31-3/+10
* MLK-13289 imx: mx6sxscm: generic mx6sxscm board supportJuan Gutierrez2016-10-26-0/+1321
* MLK-13255 imx: mx6dqscm: generic mx6dqscm board supportJuan Gutierrez2016-10-21-0/+2537
* MLK-13373 mx6sll: update ddr script to 2.1.1Peng Fan2016-10-21-4/+4
* MLK-13352 imx: mx6sll: support mx6sllevk boardPeng Fan2016-10-19-0/+796
* MLK-13336 mx6sll_arm2: Update LPDDR2 script to v2.1Ye Li2016-10-13-3/+10
* MLK-13331 mx6sll_arm2: Output WDOG_B signal to reset PMICYe Li2016-10-12-0/+8
* MLK-13330 mx6sll_arm2: Update LPDDR3 script to v2.2Ye Li2016-10-12-7/+14
* MLK-13307-15 imx: mx6sll: add mx6sll arm2 supportPeng Fan2016-10-11-0/+1068
* MLK-13131: mx6qarm2: add fastboot and recovery supportAdrian Alonso2016-09-13-0/+33
* MLK-13132: mx6qarm2: mt128x64mx32: adjust ahb/axi podf dividersAdrian Alonso2016-09-07-1/+1
* MLK-13141 mx6qpsabresd: Do not touch VGEN3 and VGEN5Robin Gong2016-08-30-12/+14
* MLK-13115 imx: mx6ullevk: Update LPDDR2 script for i.MX6ULL 9x9 EVKYe Li2016-08-23-4/+4
* MLK-13070 imx: mx6ullevk: Add 9x9 EVK supportYe Li2016-08-12-21/+17
* MLK-12929 imx6ull: support splash screen for epdcRobby Cai2016-07-29-0/+221
* MLK-12996 imx: mx6dqp/dq: Fix SATA read/write fail after booting from SATAYe Li2016-07-29-4/+14
* MLK-12988 imx: mx6ull Add board support for i.MX6ULL EVKYe Li2016-07-19-0/+1695
* MLK-12889 mx6ullarm2: Update DDR script to version 2.2Ye Li2016-06-08-2/+2
* MLK-12884 mx7dsabresd: Fix LCD_PWR_EN output settingYe Li2016-06-06-1/+1
* MLK-12815: mx6ul_14x14_evk: add new NAND config for i.MX6UL 14x14 EVK boardHan Xu2016-05-23-0/+2
* MLK-12800 imx: mx7dsabresd: support revCPeng Fan2016-05-16-4/+13
* MLK-12791 mx6qpsabresd: Change ENET TXCLK clock from PLLYe Li2016-05-16-0/+10
* MLK-12748-3 imx: adjust imx7d lpddr3 lpsr exit flowAnson Huang2016-05-09-1/+13
* MLK-12748-2 imx: remove IOMUXC GPR setting for i.mx7d retention modeAnson Huang2016-05-09-3/+3