summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeLines
* MLK-13373 mx6sll: update ddr script to 2.1.1Peng Fan2016-11-16-4/+4
* MLK-13352 imx: mx6sll: support mx6sllevk boardPeng Fan2016-11-16-0/+796
* MLK-13336 mx6sll_arm2: Update LPDDR2 script to v2.1Ye Li2016-11-16-3/+10
* MLK-13331 mx6sll_arm2: Output WDOG_B signal to reset PMICYe Li2016-11-16-0/+8
* MLK-13330 mx6sll_arm2: Update LPDDR3 script to v2.2Ye Li2016-11-16-7/+14
* MLK-13307-15 imx: mx6sll: add mx6sll arm2 supportPeng Fan2016-11-16-0/+1068
* MLK-13407: mx6qarm2: mt128x64mx3 2: add init pre charge all commandAdrian Alonso2016-10-31-3/+10
* MLK-13289 imx: mx6sxscm: generic mx6sxscm board supportJuan Gutierrez2016-10-26-0/+1321
* MLK-13255 imx: mx6dqscm: generic mx6dqscm board supportJuan Gutierrez2016-10-24-0/+2537
* MLK-13131: mx6qarm2: add fastboot and recovery supportrel_imx_4.1.15_2.0.0_gaAdrian Alonso2016-09-15-0/+33
* MLK-13132: mx6qarm2: mt128x64mx32: adjust ahb/axi podf dividersAdrian Alonso2016-09-15-1/+1
* MLK-13141 mx6qpsabresd: Do not touch VGEN3 and VGEN5Robin Gong2016-08-30-12/+14
* MLK-13115 imx: mx6ullevk: Update LPDDR2 script for i.MX6ULL 9x9 EVKYe Li2016-08-23-4/+4
* MLK-13070 imx: mx6ullevk: Add 9x9 EVK supportYe Li2016-08-12-21/+17
* MLK-12929 imx6ull: support splash screen for epdcRobby Cai2016-07-29-0/+221
* MLK-12996 imx: mx6dqp/dq: Fix SATA read/write fail after booting from SATAYe Li2016-07-29-4/+14
* MLK-12988 imx: mx6ull Add board support for i.MX6ULL EVKYe Li2016-07-19-0/+1695
* MLK-12889 mx6ullarm2: Update DDR script to version 2.2Ye Li2016-06-08-2/+2
* MLK-12884 mx7dsabresd: Fix LCD_PWR_EN output settingYe Li2016-06-06-1/+1
* MLK-12815: mx6ul_14x14_evk: add new NAND config for i.MX6UL 14x14 EVK boardHan Xu2016-05-23-0/+2
* MLK-12800 imx: mx7dsabresd: support revCPeng Fan2016-05-16-4/+13
* MLK-12791 mx6qpsabresd: Change ENET TXCLK clock from PLLYe Li2016-05-16-0/+10
* MLK-12748-3 imx: adjust imx7d lpddr3 lpsr exit flowAnson Huang2016-05-09-1/+13
* MLK-12748-2 imx: remove IOMUXC GPR setting for i.mx7d retention modeAnson Huang2016-05-09-3/+3
* MLK-12748-1 imx: adjust i.mx7d standby voltage settingAnson Huang2016-05-09-14/+14
* MLK-12629-2: i.MX6QP: update pluginPeng Fan2016-05-04-0/+12
* MLK-12735 mx6qpsabresd: Update DDR script to version 1.14Ye Li2016-04-29-6/+28
* MLK-12705-1 ARM: imx: add support for i.MX7D TO1.2Anson Huang2016-04-29-59/+59
* MLK-12694 mx6ullarm2: Remove the CD detection of SD2Ye Li2016-04-22-3/+1
* MLK-12687 mx6ullarm2: Clean up macro usage for pins conflict devicesYe Li2016-04-21-8/+8
* MLK-12690 imx: mx6ull: fix build error for pluginPeng Fan2016-04-21-1/+1
* MLK-12677 mx6ullarm2: Update DDR script to version 2.1Ye Li2016-04-20-5/+6
* MLK-12616-11 imx: mx6ull: add mx6ull arm2 board supportPeng Fan2016-04-13-0/+1120
* MLK-12563: imx: mx6ul evk: fix LCD_nPWREN settingPeng Fan2016-03-25-1/+1
* MLK-12551: imx6ul evk: fix 74LV OE usagePeng Fan2016-03-25-7/+1
* MLK-12483-5 mx6ul: Enable module fuse check EVK board and DDR3 ARM2 boardYe Li2016-03-25-1/+58
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2016-03-25-2/+12
* MLK-12371-2: imx: mx7dsabresd: fix POR reset failed after DDR enter retentionRobin Gong2016-03-25-0/+9
* MLK-12555-3 mx7dsabresd: Remove the SRS setting for wdogYe Li2016-03-25-6/+0
* MLK-12555-2 mx6ulevk: Enable the Watchdog WDOG_B signal outputYe Li2016-03-25-0/+2
* MLK-12555 mx6sxsabreauto: Enable the Watchdog WDOG_B signal outputYe Li2016-03-25-0/+3
* MLK-12553 mx6sabresd: Add RGMII supportYe Li2016-03-25-0/+33
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2016-03-25-6/+31
* MLK-12531 mx6sxsabresd: Add CM4 fast boot up demoYe Li2016-03-25-0/+19
* MLK-12527-3 android: Add board support to enable android fastbootYe Li2016-03-25-1/+746
* MLK-12527-2 android: Add FSL android fastboot supportYe Li2016-03-25-0/+81
* MLK-12529 mx7dsabresd: Fix soc revision check issueYe Li2016-03-25-1/+1
* MA-7455-1 Pico: modify Pico configuration for Brillo.Peng Fan2016-03-25-68/+24
* MA-7455 Import picosom boot codesHaoran Wang2016-03-25-0/+931
* MLK-12500-2 HAB: Add commented secure boot configurationsYe Li2016-03-25-0/+11
generated by cgit v1.1 at 2024-11-24 05:33:40 +0000