summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* MLK-11753 imx: mx6dqp: update ddr script to v1.09Peng Fan2015-10-23-7/+17
| | | | | | | | | | | | | | | | | | | | | | ddr script update to 1.09: http://compass.freescale.net/livelink/livelink?func=ll&objId= 234694528&objAction=browse&viewType=1 arik_r2_sabre_ddr3_528_1.09.inc is for sabre-auto board. arik_r2_sdb_ddr3_528_1.09.inc is for sabre-sd board. Changelog: 1. Optimize DQS duty cycle setting 2. Optimize ZQ PU/PD value Test results: 2 ARD boards. 2 6QP-SDB boards. 1 6DP-SDB board. All passed overnight memtester stress test. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit ba8dcef9d8e10e46130559ce6defe4411bd1d1a6)
* MLK-11675 ARM: imx: change the VDD_SOC normal voltage to 0.975VBai Ping2015-10-13-0/+37
| | | | | | | | | According to the latest datasheet(Rev. C Draft 1, 10/2015) of i.MX7D, change the VDD_SOC voltage to 0.95V in run mode, and add a 25mV margin to cover the IR drop and board tolerance. So setting VDD_SOC voltage to 0.975V. Signed-off-by: Bai Ping <b51503@freescale.com>
* MLK-11682 imx: mx6ul: Update DDR script of 14x14 EVK board to 1.2 revYe.Li2015-10-10-21/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | IC team releases new DDR script "EVK_IMX6UL_DDR3L_400MHz_16bit_V1.2.inc", update it to DCD and plugin for i.MX6UL 14x14 EVK board. Updated items: Removed: 0x020c4084 0x021B0858 Value changed: 0x020E027C 0x020E0280 0x021B0008 0x021B000C 0x021B0010 0x021B0018 0x021B08C0 The script versions of EVK board and Validation Board from the following link: http://compass.freescale.net/livelink/livelink?func=ll&objId=234191407&obj Action=browse&viewType=1 Test Results: Two boards passed overnight memtester stress test. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11662-2 imx: mx6ul: Modify the MMDC automatic Power saving timerYe.Li2015-09-30-1/+1
| | | | | | | | The PST bit can't be set too small which will cause performance drop. Refer the commit for same issue on MX6UL 9x9 EVK, now fix it for 14x14 LPDDR2 ARM2 commit e1ca547d198dde94c4d8278c99499ec2d2008880 Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11662-1 imx: mx6ul: Change 14x14 LPDDR2 ARM2 memory size to 256MBYe.Li2015-09-30-1/+1
| | | | | | | The actual memory size is 256MB not 512MB, otherwise it has a wrap problem in memory and will cause memtester failed. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11622 imx6dqp-sabresd: update ddr script to v1.08Robby Cai2015-09-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable bank interleave feature to improve the performance downloaded from http://compass.freescale.net/livelink/livelink?func=ll&objId=234609508&objAction=browse&viewType=1 Before: $ /opt/fsl-samples/g2d/g2d_test Width 1920, Height 1088, Format RGBA, Bpp 32 ---------------- g2d blit performance ---------------- g2d blit time 15566us, 64fps, 134Mpixel/s ........ g2d blending time 20672us, 48fps, 101Mpixel/s ........ g2d blend-dim time 13616us, 73fps, 153Mpixel/s ........ ---------------- g2d clear performance ---------------- g2d clear time 8433us, 118fps, 247Mpixel/s ........ ---------------- g2d rotation performance ---------------- 90 rotation time 15366us, 65fps, 135Mpixel/s ........ 180 rotation time 15374us, 65fps, 135Mpixel/s ........ 270 rotation time 15373us, 65fps, 135Mpixel/s ........ g2d flip-h time 15373us, 65fps, 135Mpixel/s ........ g2d flip-v time 15372us, 65fps, 135Mpixel/s ........ ... After: $ /opt/fsl-samples/g2d/g2d_test Width 1920, Height 1088, Format RGBA, Bpp 32 ---------------- g2d blit performance ---------------- g2d blit time 2810us, 355fps, 743Mpixel/s ........ g2d blending time 4025us, 248fps, 518Mpixel/s ........ g2d blend-dim time 2740us, 364fps, 762Mpixel/s ........ ---------------- g2d clear performance ---------------- g2d clear time 1846us, 541fps, 1131Mpixel/s ........ ---------------- g2d rotation performance ---------------- 90 rotation time 5234us, 191fps, 399Mpixel/s ........ 180 rotation time 3176us, 314fps, 657Mpixel/s ........ 270 rotation time 5248us, 190fps, 398Mpixel/s ........ g2d flip-h time 2765us, 361fps, 755Mpixel/s ........ g2d flip-v time 3179us, 314fps, 657Mpixel/s ........ ... Signed-off-by: Robby Cai <r63905@freescale.com>
* MLK-11551 imx: mx6qpsabresd: Update DDR initialization in pluginYe.Li2015-09-16-0/+180
| | | | | | The DDR initialization in plugin needs to update conformably with DCD. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11549 imx: imx6ul: enlarge MMDC_MAPSR.PST to 16Anson Huang2015-09-15-1/+1
| | | | | | | | | MMDC auto power saving timer can NOT be too small, as enter/exit auto self-refresh mode too frequently may introduce too many latency for MMDC access, set it to 0x10, same as previous value on i.MX6. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11548 imx: imx6qp: add SabreSD board supportAnson Huang2015-09-15-0/+163
| | | | | | Add i.MX6QP SabreSD board support. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11486 imx: mx6ul 9x9 evk correct CS0_ENDPeng Fan2015-09-04-2/+2
| | | | | | | The lpddr2 memsize of mx6ul_9x9_evk is 256MB, not 512M, so the CS0_END should be 0x47, but not 0x4F. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11490 ARM: imx: imx6ul: disable pfuze3000 low power modeAnson Huang2015-09-02-0/+5
| | | | | | | Disable PFuze3000 low power mode during standby mode, otherwise, if the power consumption exceed the threshold, PFuze will reboot. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11427 imx: mx7d: Update DDR script for mx7d sabresd boardYe.Li2015-09-01-23/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updated items: memory set 0x307a0000 32 0x03040001 --> memory set 0x307a0000 32 0x01040001 This is just enable when LPDDR4 is enabled . memory set 0x307a0064 32 0x0040005e --> memory set 0x307a0064 32 0x00400046 T_RFC_MIN this should be: RU(260ns*528Mhz)/2=69 (0x45) memory set 0x307a00d0 32 0x00020001 --> memory set 0x307a00d0 32 0x00020083 PRE_CKE_X1024 be (500us*528Mhz/2)/1024 = 129, or 0x81 memory set 0x307a00d4 32 0x00010000 --> memory set 0x307a00d4 32 0x00690000 DRAM_RSTN_X1024 (200us*528Mhz)/1024=104, or 0x68 memory set 0x307a00e4 32 0x00090004 --> memory set 0x307a00e4 32 0x00100004 DEV_ZQINIT_X32 . Should be 16 clocks memory set 0x307a0100 32 0x0908120a --> memory set 0x307a0100 32 0x09081109 T_FAW=(40ns*528Mhz)/2)=11 memory set 0x307a0104 32 0x0002020e --> memory set 0x307a0104 32 0x0007020d tXPDLL=24ns*528Mhz=13clocks File: MX7D_EVK_DDR3_1GB_32bit.ds Test result: 3 boards pass 2 days stress test. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11461 imx: imx6ul: enable LDO bypass for 9x9 EVK boardAnson Huang2015-09-01-11/+50
| | | | | | | i.MX6UL-9x9-EVK board has PFUZE3000, so enable LDO bypass support for this board. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11388 imx: mx7d: add support for mx7d 19x19 lpddr2 arm2 boardYe.Li2015-08-20-1/+274
| | | | | | | | | | This mx7d 19x19 lpddr2 arm2 board is based on 19x19 lpddr3 arm2 board with DDR changed to 512M LPDDR2. We added DDR script for LPDDR2 and a new u-boot build target: mx7d_19x19_lpddr2_arm2_config LPDDR2 script source: lpddr2_0_1.ds Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11364 imx: mx6ul : Add support for i.MX6UL 9x9 EVK boardYe.Li2015-08-17-3/+287
| | | | | | | | | | | | | | The i.mx6ul 9x9 EVK shares the same base board with 6ul 14x14 EVK with two main changes on CPU board: 1. Change to use pfuze 3000. 2. Use 256MB LPDDR2 memory. This patch uses a macro CONFIG_6UL_9X9_LPDDR2 to distinguish the changes above, basing on 14x14 EVK board level codes. The new build target for the 9x9 EVK: mx6ul_9x9_evk_config Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11320 ARM: imx7d: disable wdog powerdown timer for LPSRAnson Huang2015-08-05-0/+5
| | | | | | | | In LPSR mode, wdog will be reset when resume, need to disable wdog powerdown timer to avoid system reset after timeout setting of 16 seconds. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11281-1 ARM: imx7d: add lpsr resume support for imx7dAnson Huang2015-08-05-0/+343
| | | | | | | | | | | | For imx7d 12x12-lpddr3-arm2 board, when system enters LPSR mode and waked up, ARM core will be reset and uboot needs to be executed first, the LPSR register contains a resume entery, if this entry is non-zero, then it means it is a resume from LPSR mode, uboot plug in code needs to make DRAM exit from retention mode then jump to the entry directly, otherwise, it is a cold boot, normal boot process will be performed. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11263-2 video: epdc: move setup_waveform_file to board commonPeng Fan2015-08-03-144/+36
| | | | | | | | | | | Since setup_waveform_file in different boards code have same implementation, move setup_waveform_file to board common code. Also rename it to board_setup_waveform_file This patch also fix a bug when using flush_cache. We should pass 'waveform_buf' to flush_cache, but not a string named 'addr'. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11263-1 video: epdc: support display logo on E-Ink screenPeng Fan2015-08-03-0/+184
| | | | | | | | | | | | | | | | | | | Support draw image on E-ink screen. 1. The image format should be PGM-P5 raw data format. 2. The image should be named epdc_logo.pgm. 3. If no epdc_logo.pgm found in the first partition(FAT), will choose to draw black border on the screen. 4. Default configuration is to draw image at pos (0,0). If 'splashpos' env is set, will choose the pos from 'splashpos'. 5. The image size should not be bigger than screen total pixel size. 6. Implement board_setup_logo_file in board/freescale/common/epdc_setup.c 7. Introudce function prototype for board_setup_logo_file. Note: i.MX7D EPDC supports advanced mode and standard mode. Since current PXP in uboot for i.MX7D not ready, only support standard mode now. advanced and standard mode needs waveform firmware's support. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11299 ARM: imx7d: initialize PMIC standby mode and voltageAnson Huang2015-08-03-0/+67
| | | | | | | Datasheet Rev-B defines standby voltage as 1V for i.MX7D, we add 25mV for board level IR drop. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11304 MX6 SabreSD: Disable HDMI detectPeng Fan2015-07-31-1/+1
| | | | | | | | | | | | | | | As the HDMI splash screen feature is not well supported, we should not set it to be the default display. In case, users leave the 'panel' uboot environment variable empty and connect the board with a HDMI monitor, the HDMI detect funtion will work and enable the HDMI splash screen. So, this patch disables HDMI detect function so that users may only explicitly set the 'panel' variable to be 'HDMI' to use HDMI splash screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11275 imx: mx6ul: Fix otg1 id pin pad setting on 6ul DDR3 ARM2Ye.Li2015-07-22-1/+1
| | | | | | | | | This pin is missed to change in patch: "MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull up" Should set it to pull down at default. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11270 ARM: imx: correct the pmic standby voltage of sw1ab on i.mx6ulBai Ping2015-07-22-2/+2
| | | | | | | The SW1AB on PMIC is used for ARM_SOC_IN supply, set the standby voltage to 0.975V to save power when system is in DSM mode. Signed-off-by: Bai Ping <b51503@freescale.com>
* MLK-11238 imx: mx7d fix usdhc pad settingsPeng Fan2015-07-13-35/+24
| | | | | | | | | | | | | | | | | | | To CD/VSELECT/RST, should use same pad settings with USDHC_PAD_CTRL, because default NO_PAD_CTRL's settings is 100K Pull-Down. But, we need pull-up for CD/VSELECT/RST. Also some board provides external pull-down/up, we'd better use internal pull-up for these pad settings. To mx7d_12x12_lpddr3_arm2: If no card plugged in, "mmc dev 1" will show "Card did not respond to voltage select". After apply this patch, it will show "MMC: no card present". To mx7dsabresd: Alougth without this patch, if no card plugged in sd1, still correct msg "MMC: no card present", anyway we'd better use pull-up. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11228-1 android: Integrate community fastboot with FSL i.MX fastbootYe.Li2015-07-13-164/+80
| | | | | | | | | | | | | | | | | | | | | 1. Replace the UDC driver with community's USB gadget d_dnl driver. 2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and EFI partitions are not support by i.MX. 3. Add FDT support to community's android image. 4. Change the booti command to boota, due to the booti has been used for ARM64 image boot. 5. Modify boota implementation to load ramdisk and fdt to their loading addresses specified in boot.img header, while bootm won't do it for android image. 6. Modify the android image HAB implementation. Authenticate the boot.img on the "load_addr" for both SD and NAND. 7. Enable new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot with relevant header file "fsl_fastboot.h". While disabling the configuration, the community fastboot is used. 8. Use community's way to combine cmdline in boot.img and u-boot environment, not overwrite the cmdline in boot.img Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11237 imx: mx6qpsabreauto update ddr script to 1.07Peng Fan2015-07-13-2/+8
| | | | | | | | | | | | | | | Update ddr script to version 1.07: 1. Change MDCCR from default value to 0x24912492, it will improve DDR duty cycle 2. The MMDC reorder bypass option, which has better DRAM performance URL: http://compass.freescale.net/livelink/livelink?func=ll&objId=234335046&objAction=browse&viewType=1 Test Results: 3 boards passed 48 hours memtester stress test. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2015-07-09-14/+54
| | | | | | | | | | Set the ID pin pad to pull up not the pull down at default, otherwise we can't enter the device mode, but always detect as host. After this change we have to use portA cable to play as host, and use portB cable for device. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11227 imx: mx6ul_14x14_lpddr2_arm2 add weimnor defconfigPeng Fan2015-07-09-0/+6
| | | | | | | | | | | | | 1. Add weimnor boot defconfig 2. move CONFIG_FSL_USDHC and CONFIG_VIDEO to board header 3. Add CONFIG_SYS_FLASH_PROTECTION for mx6ul 14x14 lpddr2 arm2 4. correct CONFIG_SYS_FLASH_SECT_SIZE and CONFIG_SYS_MAX_FLASH_SECT 5. Add comments for setup_eimnor, since ENET2_RXER pin conflicts with ENET2. Also eimnor support will disable SD1/SD2, need ENET to boot kernel and nfs using enet. So setup_eimnor should be invoked after setup_fec Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11217 imx: mx6ul: Modify QSPI PAD DSE to 120ohmYe.Li2015-07-03-3/+3
| | | | | | | | The current pad DSE for QSPI is 60ohm. Per hardware team measurement, this setting cause too strong drive to clock and data signals. Need to change the DSE to 120ohm for better signal quality. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11216-2 imx: mx7d-ddr3 remove epdc qos settingsPeng Fan2015-07-03-48/+0
| | | | | | Remove epdc qos settings from plugin.S, since set_epdc_qos does same thing. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11216-1 imx:mx7d_12x12_ddr3_arm2 add missed Kconfig filesPeng Fan2015-07-03-0/+15
| | | | | | Add missed Kconfig files for mx7d_12x12_ddr3_arm2 board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11135-2 imx: mx6ul: Add MX6UL LPDDR2 ARM2 board supportYe.Li2015-06-19-0/+1282
| | | | | | | | | Add MX6UL LPDDR2 ARM2 board BSP codes, supported peripherals: SD1, eMMC(USDHC2), USB OTG1, I2C, ENET2, PMIC. Due to a board issue, the SD1 only supports 1 bit bus width. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11134-2 imx: mx7d_12x12_ddr3_arm2 update spi nor codePeng Fan2015-06-19-0/+5
| | | | | | | We should use board_spi_cs_gpio and remove the GPIO from CONFIG_SF_DEFAULT_CS. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11059 imx: HAB unable to support Encrypted boot for 4096-bit keysUlises Cardenas2015-06-16-24/+24
| | | | | | | | Abstracted the CSF size in imximage from a hardcoded value to a config setting CONFIG_CSF_SIZE. This configuration is only enabled for secure boot. Increased the size of the CSF default allocation to 0x4000. This size covers the event the worst case of 4906-bits keys.
* MLK-11099 imx: mx6ul: Enable the Watchdog WDOG_B signal outputYe.Li2015-06-12-0/+2
| | | | | | | | When using watchdog timeout in kernel, the reset does not output the WDOG_B signal, so the power supply won't be reset. To solve the problem, we enable it in u-boot. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11033 imx: mx7d: Update the lpddr3 script to 3.0.3 revYe.Li2015-06-04-4/+4
| | | | | | | | | | | | | | | | | | Update the DDR script for i.MX7D 12x12 LPDDR3 ARM2 board and i.MX7D 19x19 LPDDR3 ARM2 board to file "7D_lpddr3_0_3.ds5" Updated items: Changes DRAMTMG2 WR2RD from 7 to 8. Compass link for this script: http://compass.freescale.net/livelink/livelink?func=ll &objid=233861153&objAction=browse&sort=name Test results: Passed overnight test on two MX7D 12x12 LPDDR3 ARM2 board Passed overnight test on one MX7D 19x19 LPDDR3 ARM2 board Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11036 imx: mx6ul fix plugin build fail and update ddrPeng Fan2015-06-04-5/+9
| | | | | | | | | | Since directory name changed, need to change it in imximage.cfg, or we will get "Can't stat board/freescale/mx6ulevk/plugin.bin". Since this commit 7331a4cc0853722b4c3addf1927a2797f39f5de2 missed to update ddr, here update the plugin code. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11011 imx: mx6ul-14x14-evk update ddr version to 1.1Peng Fan2015-06-02-4/+4
| | | | | | | | | | | | | | | | | | | | updated DDR Script of 6UL EVK Board to avoid a calibration error when using “DDR_Stress_Tester_V1.04.exe”. Updated items: [Modified] setmem /32 0x020E027C = 0x00000008 [Modified] setmem /32 0x020E0280 = 0x00000038 [Modified] setmem /32 0x021B080C = 0x00070007 [Added ] setmem /32 0x021B0858 = 0x00000F00 The script versions of EVK board and Validation Board from the following link: http://compass.freescale.net/livelink/livelink?func=ll&objId=234191407&obj Action=browse&viewType=1 Test Results: Tested on two boards, both passed overnight memtester stress test. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11010 imx: mx7d: Fix EIMNOR lock issue on mx7d 19x19 lpddr3 boardYe.Li2015-06-01-0/+1
| | | | | | | | | | Since the flash blocks are locked at default , need to set "CONFIG_SYS_FLASH_PROTECTION" to unlock them before write/erase. The patch also add the pinmux for LBA (ADV) pin and set eimnor enabled at default. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11008 imx: HAB: Fix secure boot configuration and build issueYe.Li2015-06-01-1/+1
| | | | | | | | | | | 1. There is conflict when building secure boot, because some common codes for MPC are included by using same configuration. So modify the makefile to get rid of them. 2. The 6UL arch config is missed in hab.h. Fix this issue by using the CONFIG_ROM_UNIFIED_SECTIONS. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10972-2 imx: mx7dsabresd fix i2c index usagePeng Fan2015-05-26-1/+1
| | | | | | i2c_pad_info3's i2c index should 2, but not 1. Correct it. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10956 imx: mx6ul: Change BSP name and dtb name for 14x14 packageYe.Li2015-05-25-10/+10
| | | | | | | | | | | | | | Since there is another 9x9 package for mx6ul, modify the BSP names of ddr3 arm2 board and evk board to add 14x14 package info. Also modify the loaded dtb file to align with kernel. After the change, the build target for mx6ul ddr3 arm2 board is: mx6ul_14x14_ddr3_arm2_config and the build target for mx6ul evk board is: mx6ul_14x14_evk_config Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10936 imx: mx7d: Change to use bootrom_sw_info for getting boot deviceimx_3.14.38_6ul_engrYe.Li2015-05-20-40/+25
| | | | | | | | | | | | | | | | | | | | | On MX7D, boot rom can provide some boot information such as boot device, arm freq, axi freq, etc. (see the structure below) Offset Byte4 | Byte3 | Byte2 | Byte1 0x0 Reserved | Boot Device Type | Boot Device Instance | Reserved 0x4 ARM core frequency(in Hz) 0x8 AXI bus frequency(in Hz) 0x0C DDR frequency(in Hz) 0x10 GPT1 input clock frequency(in Hz) 0x14 Reserved 0x18 0x1C The boot information can be accessed by get the pointer at 0x1E8. This patch changes the u-boot to use the new approach. When manufacture boot, the info recorded is the actual SD port, not the failed device. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10885 imx: mx6slevk ignore elan init when no epdc on boardPeng Fan2015-05-14-13/+21
| | | | | | | | | | | | | | | | If no epdc pannel is plugged into mx6slevk board, no need to do the elan init operation for each i2c init transfer which will slow the i2c speed. If epdc panned is plugged into mx6slevk board, all works as the original patch: "b6ba68516b681a38025252bd0ef6a6ed3e8adfa0" - "MLK-10215 Add elan init in i.MX6SL-EVK board" This patch also fix a bug that setup_elan_pads should be called in board_init, but not board_late_init where too late to setup_elan_pads. And align pad property with linux kernel, value is 0x17000. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10839: arm: imx: mx7d 19x19 lpddr3 arm2 board supportAdrian Alonso2015-05-13-0/+968
| | | | | | | | | | | | | * Add mx7d_19x19_lpddr3_arm2 target board supprt * Enable i2c, spinor, usb, usdhc, qspi, enet, uart * Build targets mx7d_19x19_lpddr3_arm2_defconfig mx7d_19x19_lpddr3_arm2_eimnor_defconfig - Set EIMNOR settings for Intel Sibley Asynchronous mode - Set flash sector size for 256kb (erase block size) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10873-2 imx:mx6ul removed uncompiled pmic codePeng Fan2015-05-11-8/+0
| | | | | | | This piece of code will never be compiled and used, since we use pmic framework. So remove the code block. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10873-1 imx:mx7d use pmic frameworkPeng Fan2015-05-11-82/+50
| | | | | | Use pmic framework to simplify code and make code clean. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10865 imx: mx6ulevk: Add android supportYe.Li2015-05-08-0/+110
| | | | | | | | Add android features booti, fastboot and recovery to i.MX6UL EVK board. Since there is no user button on the board, we can't implement the recovery by using button. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10855 imx: mx6ulevk/ddr3_arm2: Fix bmode value for SD1 and SD2Ye.Li2015-05-07-3/+3
| | | | | | Correct USDHC Port Selection bits in bmode value for SD1 and SD2. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-10841 imx: mx6ul_ddr3_arm2: Add support for WEIMNOR bootYe.Li2015-05-07-4/+4
| | | | | | | | | | Correct the EIMNOR settings to non-mux mode and set the environment variables configuration to FLASH when using WEIMNOR boot. New target is added for build WEIMNOR boot u-boot: mx6ul_ddr3_arm2_eimnor_config Signed-off-by: Ye.Li <B37916@freescale.com>
generated by cgit v1.1 at 2024-07-01 02:15:30 +0000