summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* 8610: Add console frame buffer support to FSL 8610 DIU driver.York Sun2007-11-07-3/+75
| | | | | | | | | | | | | | | | Add cfb console support to FSL 8610 DIU driver. Inspect board version from PIXIS to obtain correct pixel format. Use #define CONFIG_VIDEO in config file to enable fb console. To switch monitor, set monitor variable to 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS followed by "diufb init". Preserve logo bitmap at the top of the fb console. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610: Add 8610 DIU display driverYork Sun2007-11-07-5/+844
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1280x1024 and 1024x768 @ 32 bpp are supported now. DVI, Single-link LVDS, Double-link LVDS are all supported. Environmental variable "monitor" is used to specify monitor port. A new command "diufb" is introduced to reinitialize monitor and display a BMP file in the memory. So far, 1-bit, 4-bit, 8-bit and 24-bit BMP formats are supported. diufb init - initialize the diu driver Enable the port specified in the environmental variable "monitor" diufb addr - display bmp file in memory. The bmp image should be no bigger than the resolution, 1280x1024 for DVI and double-link LVDS, 1024x768 for single-link LVDS. Note, this driver allocate memory but doesn't free it after use It is written on purpose -- to avoid a failure of reallocation due to memory fragement. ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon loeliger <jdl@freescale.com>
* FSL: Add a freescale bitmap logo.York Sun2007-11-07-0/+878
| | | | | | | | This Freescale logo is a 340 x 128 x 4bpp BMP file that can be displayed by the DIU Framebuffer driver. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Merge commit 'remotes/wd/master' into newmasterJon Loeliger2007-11-07-35/+81
|\
| * TQM5200: Call usb_cpu_init() during board initMarian Balakowicz2007-11-03-2/+8
| | | | | | | | | | | | | | | | | | | | usb_cpu_init() configures GPS USB pins, clocks, etc. and is required for proper operation of kernel USB subsystem. This setup was previously done in the kernel by the fixup code which is being removed, thus low level init must be done by U-boot now. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
| * changes for IDS8247 board supportSergej Stepanov2007-11-03-33/+73
| | | | | | | | | | | | | | | | | | | | | | | | To get the IDS8247 board working following are done: - FCC2 is deactivated - FCC1 is activated - I2C is activated - CFI driver is activated - Adapted for use with LIBFDT Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
* | Merge commit 'remotes/wd/master'Jon Loeliger2007-11-02-89/+119
|\ \ | |/
| * Merge branch 'master' of /home/wd/git/u-boot/workWolfgang Denk2007-11-02-51/+61
| |\
| | * Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2007-11-02-1/+4
| | |\
| | | * Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk2007-11-01-1/+4
| | | |\
| | | | * ColdFire 54455: Fix correct boot location for atmel and intelTsiChungLiew2007-10-25-1/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | | | * ColdFire 5282: Fix external flash boot and return dramsizeTsiChungLiew2007-10-25-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | | * | Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk2007-11-01-7/+12
| | | |\ \
| | | | * | TQM5200S: fix commands for STK52xx base board because of missing SM501 ↵Martin Krause2007-10-24-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | grafic controller Some commands for the STK52xx base board try to access the SM501 grafic controller. But the TQM5200S has no grafic controller (only the TQM5200 and the TQM5200B have). This patch deactivates the commands accessing the SM501 for the TQM5200S. Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | | | * | Merge branch 'u-boot' of /home/mkr/git/u-boot-tq-group into bugfixMartin Krause2007-10-23-21/+36
| | | | |\ \ | | | | | |/
| | * | | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2007-11-01-50/+57
| | |\ \ \ \ | | | |/ / /
| | | * | | Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk2007-11-01-42/+42
| | | |\ \ \
| | | | * | | [MIPS] u-boot.lds: Define _gp in a standard mannerShinya Kuribayashi2007-10-21-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
| | | | * | | [MIPS] u-boot.lds: Fix __got_start and __got_endShinya Kuribayashi2007-10-21-18/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that __got_start points to top of the `.got', and __got_end points to bottom as well, so that we never fail to count num_got_entries. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
| | | | * | | [MIPS] u-boot.lds: Remove duplicated .sdata sectionShinya Kuribayashi2007-10-21-18/+0
| | | | | |/ | | | | |/| | | | | | | | | | | | | Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
| | | * | | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2007-11-01-8/+15
| | | |\ \ \
| | | | * | | Improve handling of PCI interrupt device tree fixup on MPC85xx CDSKumar Gala2007-10-19-8/+15
| | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the MPC85xx CDS we have two issues: 1. The device tree fixup code did not check to see if the property we are trying to update is actually found. Its possible that it would update random memory starting at 0. 2. Newer Linux kernel's have moved the location of the PCI nodes to be sibilings of the soc node and not children. The explicit PATH to the PCI node would not be found for these device trees. Add the ability to handle both paths. In the future we shouldn't handle such fixups by explicit path. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | | Merge branch 'motionpro_ng' of /home/tur/git/u-bootWolfgang Denk2007-10-24-0/+6
| |\ \ \ \ \ | | |/ / / / | |/| | | |
| | * | | | Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.Bartlomiej Sieka2007-10-23-0/+6
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay register must be written a value of 0x00000004 as the first step of the SDRAM contorller configuration. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | | | TQM5200S: fix commands for STK52xx base board because of missing SM501 ↵Martin Krause2007-10-24-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | grafic controller Some commands for the STK52xx base board try to access the SM501 grafic controller. But the TQM5200S has no grafic controller (only the TQM5200 and the TQM5200B have). This patch deactivates the commands accessing the SM501 for the TQM5200S. Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * | | | xsengine: Fix no partition type specified, use DOS as defaultJean-Christophe PLAGNIOL-VILLARD2007-10-24-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | | Fix warning differ in signedness in board/innokom/innokom.cJean-Christophe PLAGNIOL-VILLARD2007-10-23-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | | fix pxa255_idp boardMarcel Ziswiler2007-10-23-7/+8
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pxa255_idp being an old unmaintained board showed several issues: 1. CONFIG_INIT_CRITICAL was still defined. 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. 3. Symbol flash_addr was undeclared. 4. The boards lowlevel_init function was still called memsetup. 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. 6. Using -march=armv5 instead of -march=armv5te resulted in lots of 'target CPU does not support interworking' warnings on recent compilers. 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as indexes rather than the register definitions from the pxa-regs header file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to avoid any ambiguities. 8. There were several redefinition warnings concerning ICMR, OSMR3, OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. 9. The board configuration file was rather outdated. 10. The part header file defined the vendor, product and revision arrays as unsigned chars instead of just chars in the block_dev_desc_t structure. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
| * | | Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk2007-10-21-7/+9
| |\ \ \ | | |/ / | |/| / | | |/
| | * TQM8xx: Fix CAN timing.Jens Gehrlein2007-10-15-7/+9
| | | | | | | | | | | | Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2007-10-18-1/+7
| |\ \
| | * | ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap commandStefan Roese2007-10-18-1/+7
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | mpc83xx: pq-mds-pib.c typo errorTony Li2007-10-18-13/+13
| |/ / | | | | | | | | | | | | | | | | | | Correct to val8 from val. Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | Initial mpc8610hpcd board files.Jon Loeliger2007-10-17-0/+871
|/ / | | | | | | | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | ppc4xx: Fix bug in I2C bootstrap values for Sequoia/RainierStefan Roese2007-10-15-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C bootstrap values that can be setup via the "bootstrap" command, were setup incorrect regarding the generation of the internal sync PCI clock. The values for PLB clock == 133MHz were slighly incorrect and the values for PLB clock == 166MHz were totally incorrect. This could lead to a hangup upon booting while PCI configuration scan. This patch fixes this issue and configures valid PCI divisor values for the sync PCI clock, with respect to the provided external async PCI frequency. Here the values of the formula in the chapter 14.2 "PCI clocking" from the 440EPx users manual: AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz 33MHz async PCI frequency: PLB = 133: => 32 <= 44.3 <= 65 (div = 3) PLB = 166: => 32 <= 55.3 <= 65 (div = 3) 66MHz async PCI frequency: PLB = 133: => 65 <= 66.5 <= 132 (div = 2) PLB = 166: => 65 <= 83 <= 132 (div = 2) Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-15-5/+9
|/ | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
* Fix warning differ in signedness in board/mpl/vcma9/vcma9.cWolfgang Denk2007-10-13-2/+2
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk2007-10-13-4/+0
|\
| * AVR32: Initialize bi_flash* in board_init_rHaavard Skinnemoen2007-10-06-4/+0
| | | | | | | | | | | | | | | | | | | | | | The ATSTK1000-specific flash driver intializes bi_flashstart, bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI driver, don't. Initialize these in board_init_r instead so that things will still be set up correctly when we switch to the CFI driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk2007-10-13-1/+1
|\ \
| * \ Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-10-04-5/+12
| |\ \ | | |/
| * | Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-09-18-57/+46
| |\ \
| * \ \ Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-09-11-3/+6
| |\ \ \
| * \ \ \ Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-09-10-21/+46
| |\ \ \ \
| * \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-09-07-27/+921
| |\ \ \ \ \
| * | | | | | Changed API name to coloured_led.hPeter Pearse2007-09-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed code using deprecated ifdef CONFIG_BOOTBINFUNC Tidied other cpu/arm920t/start.S code
| * | | | | | Add coloured led interface for ARM boards.Peter Pearse2007-09-04-45/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
| * | | | | | Move include/led.h to board/at91rm9200dkPeter Pearse2007-09-04-0/+45
| | | | | | |
* | | | | | | CM5200: Fix missing null-termination in hostname manipulation codeBartlomiej Sieka2007-10-05-0/+1
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
* | | | | | ppc4xx: Coding style cleanupStefan Roese2007-10-02-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-12-22 12:59:18 +0000