summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* board/esd/common/auto_update.c: fix Uninitialized variableWolfgang Denk2014-11-10-2/+1
| | | | | | | | | | | | cppcheck reports: [board/esd/common/auto_update.c:458]: (error) Uninitialized variable: cnt The variable is not really used anywhere, so remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* board/matrix_vision/mvblx/sys_eeprom.c: fix buffer overflowWolfgang Denk2014-11-07-1/+1
| | | | | | | | | | | Fix error detected by cppcheck: [board/matrix_vision/mvblx/sys_eeprom.c:353]: (error) Buffer is accessed out of bounds. Signed-off-by: Wolfgang Denk <wd@denx.de> cc: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Michael Jones <michael.jones@matrix-vision.de>
* board/cogent/lcd.c: fix syntax errorWolfgang Denk2014-11-07-1/+1
| | | | | | | | | | Fix error detected by cppcheck: [board/cogent/lcd.c:237]: (error) Invalid number of character (() when these macros are defined: 'CONFIG_SHOW_ACTIVITY;CONFIG_STATUS_LED'. Signed-off-by: Wolfgang Denk <wd@denx.de>
* cppcheck cleanup: fix nullPointer errorsWolfgang Denk2014-11-07-1/+6
| | | | | | | | | | | There are a number of places where U-Boot intentionally and legally accesses physical address 0x0000, for example when installing exception vectors on systems where these are located in low memory. Add "cppcheck-suppress nullPointer" comments to silence cppcheck where this is intentional and legal. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge git://git.denx.de/u-boot-tiTom Rini2014-11-07-166/+868
|\
| * omap3: cm-t3517: add LCD/DVI and splash supportIgor Grinberg2014-11-06-0/+44
| | | | | | | | | | | | | | Add support for splash screen on both DVI and SCF0403 LCD. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add Ethernet supportIgor Grinberg2014-11-06-0/+108
| | | | | | | | | | | | | | Add both EMAC and SMC911x support. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add USB supportIgor Grinberg2014-11-06-0/+120
| | | | | | | | | | | | | | | | | | Add both host and mUSB support. Currently, the selection between host USB and mUSB is done through the config file. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t3517: add basic board supportIgor Grinberg2014-11-06-0/+222
| | | | | | | | | | | | | | | | | | | | | | CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC. Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT, Analog audio codec, touch screen controller, LED. Add basic support including: LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * omap: hsmmc: assume cd gpio is active lowIgor Grinberg2014-11-06-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch the default CD GPIO polarity to active low. The current hsmmc driver assumption that the CD GPIO is active high, but in the real hardware, usually the opposite holds. The usual SD card socket has a mechanical switch which is grounded as soon as a card is inserted. Of course there might be some board logic which inverts the signal, but as far as current users are concerned, there is no such logic. Current U-Boot users either not using the CD functionality, or have a different way (e.g. external to SoC GPIO controller) for checking the card presence. This patch also brings the polarity assumption in line with the Linux kernel and adds appropriate comments. This patch also might spare issues once the TWL GPIO driver will be converted to the DM. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: move get_board_serial() fallbackIgor Grinberg2014-11-06-10/+12
| | | | | | | | | | | | | | | | | | | | The fallback is used for cases when CONFIG_SERIAL_TAG defined, but the eeprom is not used. The fallback is useful for more than one CompuLab board, so move it to a common location. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: move the SMC911x codeIgor Grinberg2014-11-06-43/+112
| | | | | | | | | | | | | | | | Extract the SMC911x initialization code to a common location where it can be reused by other compulab omap3 based boards. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: extract the splash code from boardIgor Grinberg2014-11-06-59/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The splash screen loading code can be reused by other compulab boards. For now extract it to a common location for further reuse. This also switches the splash code dependency from CONFIG_LCD to CONFIG_SPLASH_SCREEN as it should normally be. In addition this patch fixes the accidental dependency of the get_board_mem_timings() function on CONFIG_LCD, by just moving the splash code and leaving the above function intact. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap3: cm-t35: move the USB hub reset codeIgor Grinberg2014-11-06-11/+38
| | | | | | | | | | | | | | | | Extract the USB hub reset code to a common location where it can be reused by other compulab boards. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * compulab: refactor board revision handlingIgor Grinberg2014-11-06-25/+54
| | | | | | | | | | | | | | | | Move board revision handling code to a common location for further reuse. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * arm: am335x: net: pxm2: disable rgmii internal delay modeHeiko Schocher2014-11-06-1/+1
| | | | | | | | | | | | | | | | disable internal delay through gmii_sel register, as this is done in the ar8031 phy. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| * ks2_evm: board: remove sprintf for simple stringKhoronzhuk, Ivan2014-11-06-5/+2
| | | | | | | | | | | | There is no reason to sprintf simple string. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * ks2_evm: readme: add k2l evm board informationKhoronzhuk, Ivan2014-11-05-5/+15
| | | | | | | | | | | | | | | | Currently Keystone2 Lamar evm (K2L) board is added, so update Keystone2 readme file to have such one. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * board: k2l_evm: add network supportHao Zhang2014-11-05-1/+39
| | | | | | | | | | | | | | | | | | This patch adds network support code and enables keystone_net driver usage for k2l_evm evaluation board. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * am335x_evm: Convert NOR_BOOT to KconfigTom Rini2014-11-05-0/+8
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * am335x_evm: Add NOR to KconfigTom Rini2014-11-05-0/+7
| | | | | | | | | | | | | | Make enabling support for NOR (and describe where it's seen) be done via Kconfig. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'rmobile' of git://www.denx.de/git/u-boot-shTom Rini2014-11-05-8/+26
|\ \
| * | arm: rmobile: alt: Fix typo of SCIF idNobuhiro Iwamatsu2014-11-04-3/+3
| | | | | | | | | | | | | | | | | | | | | Alt board use SCIF2, not SCIF0. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Remove RAM address initializationNobuhiro Iwamatsu2014-11-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board info structure is not still set up, the setting of RAM address causes illegal access. Therefore the setting of RAM address is removed. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: koelsch: Remove RAM address initializationNobuhiro Iwamatsu2014-11-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board info structure is not still set up, the setting of RAM address causes illegal access. Therefore the setting of RAM address is removed. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Remove RAM address initializationNobuhiro Iwamatsu2014-11-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since board info structure is not still set up, the setting of RAM address causes illegal access. Therefore the setting of RAM address is removed. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Add external RAM bootNobuhiro Iwamatsu2014-11-04-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: koelsch: Add external RAM bootNobuhiro Iwamatsu2014-11-04-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0x70000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Add external RAM bootNobuhiro Iwamatsu2014-11-04-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM. The default boot address is 0xB0000000. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Fix change of the CPU frequencyNobuhiro Iwamatsu2014-11-04-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The change of the CPU frequency is waited for until PLL0ST of the PLLECR is set to 1. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-05-17/+1339
|\ \ \ | |_|/ |/| |
| * | arm: mx6: cm_fx6: detect 1GB DRAM correctly on soloNikita Kiryanov2014-11-05-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 1GB DRAM configuration on mx6 solo uses 2 chip selects, but the code tests 1GB DRAM configuration as if it is all present on one chip select, and thus cannot see the full range of available memory. Refactor the check to detect 1GB DRAM correctly. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | arm: mx6: cm_fx6: change issd gpio orderNikita Kiryanov2014-11-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the order in which GPIOs are toggled in SATA init sequence to accomodate both SanDisk and Phison SSDs. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | novena: Add MAINTAINERS fileFabio Estevam2014-11-03-0/+6
| | | | | | | | | | | | | | | | | | | | | Commit f91c09acf5c58c ("ARM: mx6: Add support for Kosagi Novena") missed to add a MAINTAINERS file, so add Marek as the maintainer. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | arm, imx, spi: detect spi flash again on aristainetos boardHeiko Schocher2014-11-03-0/+6
| | | | | | | | | | | | | | | | | | | | | 155fa9af95a "spi: mxc: fix sf probe when using mxc_spi" break spi flash detection on the aristainetos board. Fix this. Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6 sabreauto: Add board support for USB EHCIYe.Li2014-11-03-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mx6 sabreauto board, there are two USB ports: 0: OTG 1: HOST The EHCI driver is enabled for this board, but the IOMUX and VBUS power control is not implemented, which cause both USB port failed to work. This patch fix the problem by adding the board support codes. Since the power control uses the GPIO pin from port expander MAX7310, the PCA953X driver is enabled for accessing the MAX7310. The ID pin of OTG Port needs to configure the GPR1 bit 13 for selecting its daisy chain. Add a new function "imx_iomux_set_gpr_register" to handle GPR register setting. Signed-off-by: Ye.Li <B37916@freescale.com>
| * | imx: mx6slevk: Add support for USDHC1 and USDHC3 slotsYe.Li2014-11-03-6/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | There are three SD/MMC sockets on mx6slevk boards. Implements the full support for them. The default boot socket is USDHC2, so the MMC environment is set to that device. Signed-off-by: Ye.Li <B37916@freescale.com>
| * | novena: Fix ethernet PHY reset sequenceNikolay Dimitrov2014-10-30-21/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes conflict between PHY pins becoming outputs after reset and imx6 still driving the pins. It also fixes the reset timing as recommended by the PHY datasheet. Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Cc: Stefano Babic <sbabic@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | ot1200: rework card detect for eMMCChristian Gmeiner2014-10-30-3/+4
| | | | | | | | | | | | Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * | ot1200: add support for usdhc4Christian Gmeiner2014-10-30-5/+49
| | | | | | | | | | | | | | | | | | | | | On the 'mr' variant switching to 'mmc dev 1' will result in "MMC: no card present". Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * | ot1200: add feature padsChristian Gmeiner2014-10-30-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The older 'mr' variant and the generic variant of the OT1200 differ in some places. As the name suggests the generic variant supports more boot devices. In order to be compatible with the 'mr' variant we define some 'feature' GPIOs. On the 'mr' variant this pads are not connected so we define their state with the help of the internal pullups. On the generic variant this GPIOs are connected and represent the state of the hardware. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * | tqma6: fix typo in header guard defineMarkus Niebel2014-10-30-1/+1
| | | | | | | | | | | | Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | tqma6: fix sf detectionMarkus Niebel2014-10-30-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way to define a GPIO line, which can be used to force CS high across multiple transactions. In order to fix sf detection change board code to make use of board_spi_cs_gpio(..). Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * | mx6sabresd: Add Seiko WVGA panel supportFabio Estevam2014-10-30-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the 4.3'' Seiko WVGA parallel display. In order to direct the splash screen to the Seiko display: => setenv panel SEIKO-WVGA => save => reset Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | ARM: mx6: Add support for Kosagi NovenaMarek Vasut2014-10-30-0/+975
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Kosagi Novena board. Currently supported are: - I2C busses - FEC Ethernet - MMC0, MMC1, Booting from MMC - SATA - USB ports - USB Ethernet Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Nikolay Dimitrov <picmaster@mail.bg> Reviewed-by: Nikolay Dimitrov <picmaster@mail.bg>
* | | dm: sunxi: Make sure that GPIOs are requestedSimon Glass2014-11-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The scsi_init() function uses a GPIO so should request it. There is no way to return an error here, and the request may be made multiple times, so just ignore errors for now. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | dm: sunxi: Add a new config for an FDT-based pcDuino3Simon Glass2014-11-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | For now we won't want to mess with the existing configurations. Create a new one which will enable device tree and driver model. Note that this brings the device tree binary into u-boot-sunxi-with-spl.bin. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD>Ian Campbell2014-11-05-22/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was done automatically with the following bits of scripting. The Kconfig choice content was generated with this script snippet: for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i); MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i) echo "config TARGET_$TARGET" echo " bool \"$TARGET\"" echo " depends on $MACH" echo done defconfigs were updated with a sed script (t): # Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS, /^CONFIG_SYS_EXTRA_OPTIONS/ { s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/; # Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving # CONFIG_TARGET_<BOARD> in pattern space P;D; }; # Move CONFIG_TARGET_<BOARD> to hold space /^CONFIG_TARGET/{h;n} # Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or # normal mode. /^CONFIG_MACH/{p;g;p;n}; /^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n}; # Print any remaining lines normally p; Run as: sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*) and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from Colombus_defconfig board/sunxi/Makefile was updated with: sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile and manually retabbing a few lines to line up again. The board descriptions could certainly be improved. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig optionIan Campbell2014-11-05-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's unfortunate that this needs to be present in both .config and spl/.config since it makes it slightly hard to enable FEL mode for a regular defconfig. It can be done with: echo CONFIG_SPL_FEL=y >> .config echo CONFIG_SPL_FEL=y >> spl/.config Ideally only one of those would be needed. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: kconfig: Rename TARGET_SUN[45678]I to MACH_SUN[45678]I.Ian Campbell2014-11-05-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we have CONFIG_ARCH_SUNXI as the toplevel, CONFIG_MACH_SUN[45678]I as the per-SoC option and leave CONFIG_TARGET_BLAH free for individual boards in the future. Done automatically with: sed -i -e 's/TARGET_\(SUN[45678]I\)/MACH_\1/g' $(git grep -l TARGET_SUN[45678]I) Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.1 at 2024-11-07 18:32:45 +0000