summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* trats/trats2: exynos_power_init: return 0 if no battery detected.Przemyslaw Marczak2014-06-19-2/+2
| | | | | | | | | | | | | | | | Generic board support is now enabled for Exynos 4, and if any init function returns an error then the init process is stopped. This makes a boot issue on the Trats and Trats2 devices. If the device is supplied by USB cable or an external power supply then it can't boot because function exynos_power_init returns an error. Now this function returns 0 if battery is not connected. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* arm: vf610: Add QSPI support for VF610TWRChao Fu2014-06-09-2/+27
| | | | | | | Add QSPI support for VF610TWR, such as clock and iomux. Signed-off-by: Alison Wang <Huan.Wang@freescale.com> Signed-off-by: Chao Fu <b44548@freescale.com>
* arm:am43xx: Add TPS65218 support to scale voltages upTom Rini2014-06-06-7/+41
| | | | | | | | This family is supported by the TPS65218 PMIC. Implement a scale_vcores to set the MPU and CORE voltage correctly to the max frequency that is supported (and what we will be scaling them to in setup_dplls()). Signed-off-by: Tom Rini <trini@ti.com>
* am43xx: Only read the MPU frequency bits of CTRL_DEV_ATTRTom Rini2014-06-06-1/+4
| | | | Signed-off-by: Tom Rini <trini@ti.com>
* board/BuR/tseries: cosmetic changesHannes Petermaier2014-06-06-2/+2
| | | | | Cc: trini@ti.com Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* board/BuR/tseries: only run gpmc_init(...) in NAND-buildHannes Petermaier2014-06-06-0/+2
| | | | | | | | if we have no NAND-Chip, we don't need the gpmc-controller and therefore is no need to init it. Cc: trini@ti.com Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* board/BuR/tseries: Add support for using 8-bit on eMMCHannes Petermaier2014-06-06-0/+5
| | | | | Cc: trini@ti.com Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* am43xx_evm: Add qspiboot targetSourav Poddar2014-06-06-2/+2
| | | | | | | | | | | | | The ePOS EVM and EVM SK have QSPI as an option to boot. Add a qspiboot target that utilizes QSPI for env and so forth as an example of best practices. As QSPI is booted from directly we need to chang CONFIG_SYS_TEXT_BASE. Note that on ePOS EVM the QSPI and NAND are mutually exclusive choices we need to handle that elsewhere, once NAND support is also added. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and ↵pekon gupta2014-06-06-6/+6
| | | | | | | | | | | GPMC_NAND_ECC_LP_x16_LAYOUT OMAP3 used GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT macros to configure GPMC controller for x7 or x8 bit device connected to its interface. Now this information is encoded in CONFIG_SYS_NAND_DEVICE_WIDTH macro, so above macros can be completely removed. Signed-off-by: Pekon Gupta <pekon@ti.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-06-02-378/+251
|\
| * exynos: Enable the LCD backlight for snowSimon Glass2014-05-28-1/+99
| | | | | | | | | | | | | | | | | | The backlight uses FETs on the TPS65090. Enable this so that the display is visible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos5: support tps65090 pmicAaron Durbin2014-05-28-0/+13
| | | | | | | | | | | | | | | | | | | | | | The TSP65090 is a PMIC on some exynos5 boards. The init function is called for the TPS65090 pmic. If that device is not a part of the device tree (returns -ENODEV) then continue. Otherwise return a failure. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: Drop old smdk5250.c fileSimon Glass2014-05-28-367/+125
| | | | | | | | | | | | | | This is not used by any boards now. Drop it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: exynos5420: removed undefined gpio structureJaehoon Chung2014-05-16-3/+0
| | | | | | | | | | | | | | It's removed the exynos5_gpio_part1. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: exynos: board: change the mmc/sd init sequenceJaehoon Chung2014-05-16-7/+6
| | | | | | | | | | | | | | | | | | | | | | Exynos4 can be used the dwmmc controller for eMMC. Then it needs to check dwmmc_init() at first. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: goni: dfu: Add support for DFU to Goni targetMateusz Zalega2014-05-16-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Proper adjustment for supporting DFU at GONI target has been made. The s5p_goni.h file has been updated. Moreover the code for low level USB initialization has been added to GONI board code. The malloc pool has been enlarged in order to support larger buffer sizes needed by DFU implementation. Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Tested-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com> Tested-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | ARM: at91sam9m10g45ek: enable mci0 supportWu, Josh2014-05-27-0/+10
| | | | | | | | | | | | | | | | | | | | Also we enable the mmc command in configuration file. As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION, so remove the redundant CONFIG_DOS_PARTITION definition. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: atmel: enable SPL on sama5d3_xplained boardBo Shen2014-05-27-0/+87
| | | | | | | | | | | | | | It supports boot from NAND and SD/MMC card. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | sunxi: mmc supportIan Campbell2014-05-25-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote: > > + case 1: > > +#if CONFIG_MMC1_PG > Are you sure that this is correct and shouldn't be: > > +#ifdef CONFIG_MMC1_PG > > ? It's "correct" in so far as it works (the boards.cfg config stuff #defines things to 1), but I think you are right that it isn't the preferred style. But... > A quick scan through this patch series shows that this define > is not set at all. Perhaps its outdated? Or is it used to support > some other sunxi SoC? Not sure, perhaps it should be removed for > now. ...I had thought that it was to support some other board which wasn't being upstreamed right now, so eventually useful and harmless for now, but I've just checked and it isn't actually used by any of the boards in u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it. Rather than resend the entire series, here is v5.1 of this patch. > Other than this please add my: > > Reviewed-by: Stefan Roese <sr@denx.de> Thanks! 8<--------------------------------- >From 20704e35a41664de5f516ed0e02981ac06085102 Mon Sep 17 00:00:00 2001 From: Ian Campbell <ijc@hellion.org.uk> Date: Fri, 7 Mar 2014 04:29:39 +0000 Subject: [PATCH v5.1 7/8] sunxi: mmc support This adds support for the MMC controller on the Allwinner A20 (sun7i) processor. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Luke Leighton <lkcl@lkcl.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Wills Wang <wills.wang.open@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Cc: Aaron Maoye <leafy.myeh@allwinnertech.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: Tom Rini <trini@ti.com>
* | sunxi: add gmac Ethernet supportIan Campbell2014-05-25-0/+33
| | | | | | | | | | | | | | | | | | | | | | Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i) processors. Enable for the Cubietruck. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* | sunxi: add support for Cubietruck booting in FEL modeIan Campbell2014-05-25-0/+32
| | | | | | | | | | | | | | | | Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Tom Rini <trini@ti.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | sunxi: add sun7i cpu, board and start of day supportIan Campbell2014-05-25-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds generic board, start of day and basic build system support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Luc Verhaegen <libv@skynet.be> Signed-off-by: Luke Leighton <lkcl@lkcl.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Patrick Wood <patrickhwood@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Wills Wang <wills.wang.open@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* | arm: vf610: add DDR_SEL_PAD_CONTR registerStefan Agner2014-05-25-1/+2
| | | | | | | | | | | | | | | | Set DDR_SEL_PAD_CONTR register explicitly to DDR3 which solves RAM issues with newer silicon (1.1). This register was added in revision 4 of the Vybrid Reference Manual. Signed-off-by: Stefan Agner <stefan@agner.ch>
* | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-05-24-4/+968
|\ \
| * | compulab: eeprom: enable any i2c driverIlya Ledvich2014-05-23-2/+2
| | | | | | | | | | | | | | | | | | | | | Make the common eeprom library available for any I2C driver. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * | cm-t54: add environment partition runtime detectionDmitry Lifshitz2014-05-23-0/+22
| | | | | | | | | | | | | | | | | | | | | Add environment partition runtime detection callback. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | cm-t54: add EEPROM support and MAC address handlingDmitry Lifshitz2014-05-23-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cm-t54 Eth MAC address is stored in onboard EEPROM. Add EEPROM support and setup stored Eth MAC address. If EEPROM does not contain a valid MAC, then generate it from the processor ID code (reference code is taken from OMAP5 uEvm board file). Modify Device Tree blob MAC address field with retrieved data. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | cm-t54: add cm-t54 board supportDmitry Lifshitz2014-05-23-0/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add cm-t54 board directory, config file. Enable build. Basic support includes: Serial console SD/MMC eMMC USB Ethernet Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | omap4: duovero: Add Gumstix DuoVero machine.Ash Charles2014-05-23-0/+471
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the Gumstix DuoVero machine [1]. This is a OMAP4430-based computer-on-module (COM aka SOM) that can be mounted on various expansion boards with different peripherals. [1] https://store.gumstix.com/index.php/category/43/ Signed-off-by: Ash Charles <ash@gumstix.com> [trini: Rename gpmc_enable_gpmc_cs_config to gpmc_enable_gpmc_net_config] Signed-off-by: Tom Rini <trini@ti.com>
| * | compulab: eeprom: add default eeprom addressIgor Grinberg2014-05-23-0/+5
| | | | | | | | | | | | | | | | | | Add default eeprom address setting. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * | OMAP3: overo: add some Gumstix expansion boardsAsh Charles2014-05-23-2/+56
| | | | | | | | | | | | | | | | | | | | | Add EEPROM ID switches for Alto35, Arbor43C, Stagecoach, Thumbo, and Turtlecore Gumstix Overo expansion boards. Signed-off-by: Ash Charles <ash@gumstix.com>
| * | Add Board Revision for Wireless chipAsh Charles2014-05-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Gumstix Overo COMs with board revision 0x4 use a different Wifi and Bluetooth module: Wi2Wi's W2CBW0015. No other code changes are required in u-boot---just handling of this particular board revision. Signed-off-by: Ash Charles <ashcharles@gmail.com>
* | | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2014-05-23-0/+1
|\ \ \
| * | | arm: rmobile: koelsch: Fix QoS revision 0.240 and 0.320Nobuhiro Iwamatsu2014-05-21-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | Add register define of DBSC3 operation adjustment register, and add initial value. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* | | Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'Albert ARIBAUD2014-05-23-23/+33
|\ \ \
| * | | zynq: treat ps7_init.c/h as external files to ignore themMasahiro Yamada2014-05-14-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ps7_init.c and ps7_init.h are supposed to be exported by hw project and copied to board/xilinx/zynq/ directory. We want them to be ignored by git. So what we should do is to always treat them as external files rather than replacing ps7_init.c This commit does: - Move a weak function ps7_init() to arch/arm/cpu/armv7/zynq/spl.c and delete board/xilinx/zynq/ps7_init.c - Compile board/xilinx/zynq/ps7_init.c only when it exists - Add .gitignore to ignore ps7_init.c/h Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | zynq: add empty xil_io.h to avoid compile errorMasahiro Yamada2014-05-14-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ps7_init.c exported by hw project has #include "xil_io.h" line but U-Boot does not have "xil_io.h". So we get an error on SPL build: ps7_init.c:12581:20: fatal error: xil_io.h: No such file or directory We can delete the include directive in ps7_init.c to avoid this error. But it is painful to do this every time we export ps7_init.c file. Instead, we can put an empty xil_io.h in the same directory so we can directly copy ps7_init.c as is. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Fix building SPL without FPGA supportMichal Simek2014-05-14-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_FPGA is defined but CONFIG_SPL_FPGA is not, the build fails: board.c: In function 'board_init': board.c:41:3: error: 'fpga' undeclared (first use in this function) fpga = fpga010; Fix this by expanding the "#if.." around this block to match the other FPGA checks and don't compile this block when buildign for SPL without FPGA support. Tested a bootloader that had CONFIG_FPGA defined without CONFIG_SPL_FPGA, this now compiles without errors and loading FPGA from u-boot works. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Remove sparse warningsMichal Simek2014-05-14-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warnings: board/xilinx/zynq/board.c:17:13: warning: symbol 'fpga' was not declared. Should it be static? board/xilinx/zynq/board.c:20:13: warning: symbol 'fpga010' was not declared. Should it be static? board/xilinx/zynq/board.c:21:13: warning: symbol 'fpga015' was not declared. Should it be static? board/xilinx/zynq/board.c:22:13: warning: symbol 'fpga020' was not declared. Should it be static? board/xilinx/zynq/board.c:23:13: warning: symbol 'fpga030' was not declared. Should it be static? board/xilinx/zynq/board.c:24:13: warning: symbol 'fpga045' was not declared. Should it be static? board/xilinx/zynq/board.c:25:13: warning: symbol 'fpga100' was not declared. Should it be static? board/xilinx/zynq/board.c:120:5: warning: symbol 'board_mmc_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2014-05-23-0/+7
|\ \ \ \
| * | | | Add board_mmc_init(...) function for init mmc1 onlyHannes Petermaier2014-05-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since B&R boards uses only MMC-Controller #1, it only wastes time if we initialize #0 first to see that there is nothing. Cc: <trini@ti.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* | | | | Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-05-22-1/+1
|\ \ \ \ \
| * | | | | fpga: Define bitstream type based on command selectionMichal Simek2014-05-20-1/+1
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up partial, full and compressed bitstream handling. U-Boot supports full bitstream loading and partial based on detection which is not 100% correct. Extending fpga_load/fpga_loadbitstream() with one more argument which stores bitstream type. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-05-22-1551/+2420
|\ \ \ \ \ | | |_|/ / | |/| | |
| * | | | Merge remote-tracking branch 'u-boot/master'Albert ARIBAUD2014-05-20-779/+2008
| |\ \ \ \ | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: boards.cfg Conflicts were trivial once u-boot-arm/master boards.cfg was reformatted (commit 6130c146) to match u-boot/master's own reformatting (commit 1b37fa83).
| * | | | Merge remote-tracking branch 'u-boot-sh/rmobile'Albert ARIBAUD2014-05-16-651/+379
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: boards.cfg Trivial conflict, maintainer change plus board addition
| | * | | | arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPENobuhiro Iwamatsu2014-04-28-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MACH_TYPE_LAGER and CONFIG_MACH_TYPE are not already available on Lager board. This removes them. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | arm: rmobile: lager: Change to maximum CPU frequencyNobuhiro Iwamatsu2014-04-28-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maximum CPU clock of R8A7790 that are used in lager board is 1.4GHz. This change to use the maximum clock in this board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | arm: rmobile: koelsch: Change to maximum CPU frequencyNobuhiro Iwamatsu2014-04-28-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maximum CPU clock of R8A7791 that are used in koelsch board is 1.5GHz. This change to use the maximum clock in this board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | arm: rmobile: koelsch: Update QoS initializationNobuhiro Iwamatsu2014-04-28-17/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This update QoS version 0.240 for ES1 and version 0.310 for ES2. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.1 at 2024-11-05 11:25:41 +0000