summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* powerpc/85xx: Remove config.mk for nand linker scriptKumar Gala2011-04-04-121/+0
| | | | | | | Move the include of mpc85xx/u-boot-nand.lds to utilize CONFIG_SYS_LDSCRIPT rather than having an explicit config.mk Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Move cpu specific lmb reserve to arch_lmb_reserveKumar Gala2011-04-04-93/+5
| | | | | | | | We've been utilizing board_lmb_reserve to reserve the boot page for MP systems. We can just move this into arch_lmb_reserve for 85xx & 86xx systems rather than duplicating in each board port. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add eSDHC support on P2020DSJerry Huang2011-04-04-0/+13
| | | | | | | | | | | We enable SDHC_CD and SDHC_WP signals (pin muxed with GPIO8 & GPIO9 respectively). We enable EXT2, FAT, and parition support for both MMC & USB configs. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Declare fsl_ddr_set_memctl_regs in <asm/fsl_ddr_sdram.h>Kumar Gala2011-04-04-6/+0
| | | | | | | | | Remove declerations of fsl_ddr_set_memctl_regs in board files with and place it into a common header. Based on patch from Poonam Aggrwal. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Remove DATARATE_*_MHZ defines in static ddr initKumar Gala2011-04-04-35/+28
| | | | | | | | | | Rather than having #defines DATARATE_*_MHZ, lets just match what we do on the SPD code and convert the DDR frequency into MHZ and just compare with a constant. Based on patch from Poonam Aggrwal. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* p1022ds: allow for board-specific ngPIXIS functionsTimur Tabi2011-04-04-18/+112
| | | | | | | | | | | | | | | | The ngPIXIS is an FPGA used on the reference boards of most Freescale PowerPC SOCs. Although programming the ngPIXIS is mostly standard on all boards that have it, the P1022DS is unique in that the ngPIXIS needs to be programmed in "indirect" mode whenever the video display (DIU) is active. To support indirect mode, and to make it easier to support other quirks on future reference boards, the low-level ngPIXIS functions are all marked as weak, so that board-specific code can override any of them. We take advantage of this feature on the P1022DS, so that we can properly reset the board when the DIU is active. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Coding Style cleanup: remove trailing empty linesWolfgang Denk2011-03-27-4/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-03-27-164/+190
|\
| * SMDK6400: Fixup dram_init for relocation supportseedshope2011-03-27-1/+7
| | | | | | | | | | Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SMDK6400: Fix the mutiple link errorseedshope2011-03-27-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The first, the cpu_init.o have already been link for cmd_link_o_target atfer compile, But, The link script re-link the point file. So the link machine will generate multiple definition error information. The second, Since the first 4kB of nand boot featue code move to nand_spl, So It is not necessary to force the cpu_init.o in non-nand boot. Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SMDK6400: Fix some label undefined in build errorseedshope2011-03-27-3/+24
| | | | | | | | | | | | | | | | | | | | Modify Makefile for cpu_init.c and Start.s use some label,this defined u-boot.lds of arch/arm/cpu/arm1176. But SMDK6400 use the link script board/samsung/smdk6400/u-boot-nand.lds. So add some label form u-boot.lds to u-boot-nand.lds Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * rename _end to __bss_end__Po-Yu Chuang2011-03-27-160/+160
| | | | | | | | | | | | | | Currently, _end is used for end of BSS section. We want _end to mean end of u-boot image, so we rename _end to __bss_end__ first. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
* | powerpc/85xx: Fix PCI memory map setup on P1_P2_RDBPrabhakar Kushwaha2011-03-24-2/+2
| | | | | | | | | | | | | | | | | | Update the PCIe address map to match standard FSL memory map. Additionally, fix the TLBs so the cover the PCIe address space properly so cards plugged in like an e1000 work correctly. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8572ds: revise board specific timing for dual-rank DIMMsYork Sun2011-03-24-32/+78
|/ | | | | | | | Tested all possible values for clk_adjust and write_data_delay for dual rank UDIMM and RDIMM to revise the tables. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc52xx, digsy_mtc_rev5: Fix Linux crash, if no Flash in bank 2Heiko Schocher2011-03-21-0/+5
| | | | | | | | | | | | | | | | If no Flash is connected to cs1, Linux crashes, because reg entries are not correct adapted. Following fix is needed: - swap base addresses in CONFIG_SYS_FLASH_BANKS_LIST, as flash bank 1 is on chipselect 0 and flash bank 2 on chipselect 1 - call fdt_fixup_nor_flash_size() from ft_board_setup() Signed-off-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <hs@denx.de> cc: Werner Pfister <Pfister_Werner@intercontrol.de> cc: Detlev Zundel <dzu@denx.de>
* powerpc/corenet_ds: revise platform dependent parametersYork Sun2011-03-05-4/+4
| | | | | | | | This patch revised clk_adjust and wrlvl_start timings for corenet_ds, based on testing on Virtium VL33B5163F-K9S and Kingston KVR1333D3Q8R9S/4G. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* corenet_ds: pick the middle value for all tested timing parametersYork Sun2011-03-05-40/+18
| | | | | | | | | | | For DDR3 controller, the clk_adjust and wrlvl_start are platform-dependent. The best values should be picked up from the middle of all working combinations. This patch updates the table with confirmed values tested on Hynix dual-rank UDIMMs (HMT125U7BFR8C-H9) at 1300MT/s, 1200MT/s, 1000MT/s, 900MT/s, 800MT/s and Kingston quad-rank RDIMMs (KVR1333D3Q8R9S/4G) at 1300MT/s, 1200MT/s, 1000MT/s. Signed-off-by: York Sun <yorksun@freescale.com>
* Pantheon: Add Board Support for Marvell dkb boardLei Wen2011-02-21-0/+105
| | | | | | | | | | | | | | | | | | | | | | | | DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with * Processor upto 806Mhz * LPDDR1/2 * x8/x16 SLC/MLC NAND * Footprints for eMMC & MMC x8 card With Peripherals: * Parallel LCD I/F * Audio codecs (88PM8607) * MIPI CSI-2 camera * Marvell 88W8787 802.11n/BT module * Marvell 2G/3G RF * Dual analog mics & speakers, headset jack, LED, ambient * USB2.0 HS host, OTG (mini AB) * GPIO, GPIO expander with DIP switches for easier selection * UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* arm: Tegra2: Add support for NVIDIA Seaboard boardTom Warren2011-02-21-0/+50
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: Tegra2: Add support for NVIDIA Harmony boardTom Warren2011-02-21-0/+50
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: Tegra2: Add basic NVIDIA Tegra2 SoC supportTom Warren2011-02-21-0/+193
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* mx31pdk: Make the full boot log visibleFabio Estevam2011-02-21-1/+6
| | | | | | Use board_early_init_f so that the full boot log output can be displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx31pdk: Use the new relocation schemeFabio Estevam2011-02-21-2/+8
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* EfikaMX: switch to MACH_TYPE_MX51_EFIKAMXLoïc Minier2011-02-21-1/+1
| | | | | | | Upstream linux moved from MACH_TYPE_MX51_LANGE51 to MACH_TYPE_MX51_EFIKAMX. Signed-off-by: Loïc Minier <loic.minier@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2011-02-12-50/+2
|\
| * MIPS: Move Inca-IP targets to boards.cfgShinya Kuribayashi2011-02-05-1/+1
| | | | | | | | | | | | At the same time, fix up CPU_CLOCK_RATE to have the CONFIG_ prefix to work with boards.cfg. Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * MIPS: dbau1x00: Remove unused flash driver stubDaniel Schwierzeck2011-02-05-44/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All dbau1x00 boards use the CFI driver so this stub driver is useless and should not be compiled. This patch fixes the error: u-boot-git/board/dbau1x00/flash.c:34: multiple definition of `flash_init' drivers/mtd/libmtd.o:u-boot-git/drivers/mtd/cfi_flash.c:2084: first defined here board/dbau1x00/libdbau1x00.o: In function `write_buff': u-boot-git/board/dbau1x00/flash.c:40: multiple definition of `write_buff' drivers/mtd/libmtd.o:u-boot-git/drivers/mtd/cfi_flash.c:1265: first defined here Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * MIPS: Purple: Fix multiple definition error on final linking of u-boot binaryDaniel Schwierzeck2011-02-05-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The linker of recent toolchains complains about multiple definitions on final linking of u-boot binary. This patch removes all redundant object files from u-boot.lds those are already added to .text section by the linker. That patch could not be tested but the resulting u-boot.map still looks good. The start symbol is at 0xB0000000, the environment at 0xB0008000 so u-boot should boot. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
* | sc520: Move RAM sizing code from asm to CGraeme Russ2011-02-12-11/+0
| |
* | eNET: General code cleanupGraeme Russ2011-02-12-20/+4
| |
* | eNET: Rearrange PAR assignmentsGraeme Russ2011-02-12-15/+46
| |
* | eNET: Define MMCR values in config.hGraeme Russ2011-02-12-46/+63
| |
* | eNET: Fix eNET Interrupt Setup for LinuxGraeme Russ2011-02-12-6/+9
| | | | | | | | | | Fix minor issues with the configuration of the hardware interrupts for Linux when booting the eNET board
* | sc520: Move board specific settings to board init functionGraeme Russ2011-02-12-0/+9
| |
* | sc520: Define MMCR address in include fileGraeme Russ2011-02-12-3/+4
| |
* | x86: Make cpu init functions weakGraeme Russ2011-02-12-22/+0
| |
* | x86: Parametize values used in linker scriptGraeme Russ2011-02-12-0/+1
| |
* | eNET: Create distinct board configurationsGraeme Russ2011-02-12-1/+0
| | | | | | | | | | | | Position independant functionality is due for removal from the x86 architecture, so create two distinct configurations - One for Flash and one for SRAM
* | x86: Align config.mk and linker scripts with other archesGraeme Russ2011-02-12-108/+0
| |
* | fsl: update CRC after setting EEPROM identifierTimur Tabi2011-02-09-0/+1
| | | | | | | | | | | | | | | | | | | | The "mac id" command is used to initialize the EEPROM data to a specific format, but it was not updating the CRC. This didn't cause any real problems, because writing the data to the EEPROM will always update the CRC anyway, but it did result in a bogus CRC warning. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk2011-02-09-0/+12
|\ \
| * | nios2: add gpio_is_validThomas Chou2011-02-08-0/+7
| | | | | | | | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | nios2: add gpio_freeThomas Chou2011-02-08-0/+5
| |/ | | | | | | | | Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-02-09-158/+540
|\ \ | |/ |/|
| * ppc4xx: Add DLVision-10G board supportDirk Eibach2011-02-07-158/+540
| | | | | | | | | | | | | | | | | | | | Board support for the Guntermann & Drunck DLVision-10G. Adds support for multiple FPGAs per board for gdsys 405ep architecture. Adds support for dual link osd hardware for gdsys 405ep. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2011-02-04-322/+1253
|\ \ | |/ |/|
| * sh: sh7785lcr: Fix out of tree buildingNobuhiro Iwamatsu2011-02-03-2/+6
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: add support for sh7757lcr boardYoshihiro Shimoda2011-02-02-0/+1265
| | | | | | | | | | | | | | | | | | | | | | | | | | The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM, Ethernet, and more. This patch supports the following functions: - 256MB DDR3-SDRAM - SPI ROM - Ethernet Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for shmin boardNobuhiro Iwamatsu2011-02-02-27/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: Remove config.mk for espt boardNobuhiro Iwamatsu2011-02-02-9/+0
| | | | | | | | | | | | | | Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the unnecessary config.mk file. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.1 at 2024-11-09 07:35:55 +0000