| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The PS/2 keyobard driver for the TQM85xx modules only supports the
internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
include a DUART, the TQM8560 modules can't be used with the PS/2
keyboard controller on the STK85xx board.
The PS/2 keyboard driver should work with the modules TQM8540,
TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
Make sure the PS/2 controller on the STK85xx is programmed. Jumper
settings: X66 1-2, 9-10; X61 2-3
Patch by Martin Krause, 21 Jun 2006
|
|
|
|
|
|
|
|
|
| |
During an automatic update via USB stick, U-Boot searches for
images with the name "firmware.img" and "kernel.img". This names
are now changed to "firmw_01.img" and "kernl_01.img". This is done,
to prevent updates of new boards (with the new macronics "c" step
flashes) with old, incompatible firmware or kernel versions.
Patch by Martin Krause, 21 Jun 2006
|
|
|
|
|
|
| |
Make sure upper lext pixel can be set to blue, too
(so far only red was possible).
Patch by Martin Krause, 15 Feb 2006
|
|
|
|
|
|
|
|
|
|
| |
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
- use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
- remove "Unlock Bypass" mode, because macronix flashes do not support
this mode officially
- fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
for Intel compatible flashes, not for AMD compatible.
Patch by Martin Krause, 15 Feb 2006
|
|
|
|
|
| |
(for erase errors and timeout errors)
Patch by Martin Krause, 14 Feb 2006
|
|
|
|
|
|
|
|
| |
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006
Some code cleanup
|
|
|
|
|
|
| |
Patch by Martin Krause, 20 Mar 2006
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
|
|
|
| |
Patch by Markus Klotzbuecher, 12 Jul 2006
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
placed to the drivers/rpx_pmcia.c file to avoid duplication.
Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
|
|\ |
|
| | |
|
| | |
|
|\ \
| |/ |
|
| |\ |
|
| | | |
|
|/ / |
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | | |
reasonable TEXT_BASE, update default environment and enable keyed
autoboot.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
| | |
| | |
| | |
| | | |
Patch from Richard Danter, 12 Aug 2005
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | | |
Patch by Thomas Lange, Aug 11 2005
|
| | | |
| | | |
| | | |
| | | | |
Patch by Thomas Waehner, 07 Mar 2006
|
| | | |
| | | |
| | | |
| | | | |
Patch by Martin Krause, 11 Jan 2006
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Patch by Martin Krause, 07 Nov 2005
Tested on a STK85XX baseboard. Make sure the PS/2 controller
has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Patch by Martin Krause, 08 Nov 2005
In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The environment variable "ver" is now set before
do_auto_update() is called, so that "ver" can be used
in USB update scripts.
Patch by Martin Krause, 27 Oct 2005
|
| | | |
| | | |
| | | |
| | | | |
Patch by Martin Krause, 27 Oct 2005
|
| | | |
| | | |
| | | |
| | | | |
Patch by Martin Krause, 27 Oct 2005
|
|/ / / |
|
| | | |
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | | |
Patch from Scott McNutt, 11 Aug 2005
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Patch from Scott McNutt, 11 Aug 2005
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
|
|\ \ \ \ |
|
| | | | |
| | | | |
| | | | |
| | | | | |
Patch by Scott McNutt, 08 Jun 2006
|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
Patch by Scott McNutt, 08 Jun 2006
|
|/ / / / |
|
| | | |
| | | |
| | | |
| | | | |
Patch by Stefan Roese, 06 Jun 2006
|
| | | | |
|
| | | |
| | | |
| | | |
| | | | |
Patch by Stefan Roese, 02 Jun 2006
|
| | | |
| | | |
| | | |
| | | | |
Patch by Stefan Roese, 29 May 2006
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
|
| | | |
| | | |
| | | |
| | | | |
(needed because of differences in the PCMCIA hardware).
|
| | | | |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Problems have been seen in the linux kernel's smc91x network driver
due to improper bus timings. The latest 2.6 OMAP kernels currently
have a workaround, but this fix belongs in u-boot.
Patch by Kevin Hilman, 13 Oct 2005
|
| | | |
| | | |
| | | |
| | | | |
Patch by Hiroki Kaminaga, 11 Mar 2006
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912"
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
|