| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
| |
System can not find MMC/SD card in SD
slot 1 when booting from Uboot.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update DDR init script according to compass:
http://compass.freescale.net/go/216805297
FCP 7 KB 25-Mar-2010
setmem /32 0x53fa8570 = 0x00180000 ->
setmem /32 0x53fa8570 = 0x00200000
setmem /32 0x53fa8578 = 0x00180000 ->
setmem /32 0x53fa8578 = 0x00200000
Signed-off-by:Jason Liu <r64343@freescale.com>
|
|
|
|
|
|
|
|
|
| |
-Update eSDHC clock setting,
-Fix the GPT timer setting,
-Fix the boot option pars,
-Remove mdelay() function call to improve the performance
Signed-off-by:Jason Liu <r64343@freescale.com>
|
|
|
|
|
|
|
| |
-update DDR script for 300MHZ support, this script got from Yaniv
-increase VDDA to 1.25V
Signed-off-by:Jason Liu <r64343@freescale.com>
|
|
|
|
|
|
| |
Add mmu, l1cache, l2cache support for mx53.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Add uboot support for MX53
Signed-off-by:Jason Liu <r64343@freescale.com>
|
|
|
|
|
|
| |
MX28 U-BOOT enhancements.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
CR 00120191 is used to adjust IPU/VPU priority for memory
access in order to improve video performance. However this
change caused video playback and record unstable (See
CR 00120697, CR 00121478). It's decided to remove CR 00121504
change for the stability.
Signed-off-by: Lily Zhang <r58066@freescale.com>
|
|
|
|
|
|
|
| |
MMU enable code is missed in mx51 and mx35 u-boot.
So add these codes.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Build Mfg firmware for mx51-bbg
Signed-off-by: Frank Li <frank.li@freescale.com>
|
|
|
|
|
|
| |
Enable Ethernet and MMC boot support for imx28-evk
Signed-off-by: Frank Li <frank.li@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
The new strategy will be:
bootargs_android_recovery and bootcmd_android_recovery
will be checked.
If they exists, their values will be used by bootargs_android
and bootcmd_android, or the default vaules will be used.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
New M4IF settings benefit to video performance improvement.
Signed-off-by: Lily Zhang <r58066@freescale.com>
|
|
|
|
|
|
|
| |
The value read from mxc_i2c is not complete.
The last byte is lost.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
| |
The mac addr set to FEC is smc911x's.
So add a environment "fec_addr" to set fec address.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
| |
The IPU_HND_BYP bit is different in mx35 to1 and to2.
Change the value of this bit for mx35 to2.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
| |
The iomux settings of mx51 bbg and mx35 3stack can't support eMMC card.
Thus, change the iomux settings.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Add mx28 to u-boot and pass the compiling.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
| |
1. Update MX51 3-stack initialization codes to merge some
fixes from 200901 version
2. Update MX51 BBG code to add chip version check
Signed-off-by: Lily Zhang <r58066@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
The SD card in MMC Slot2 can not be detected. This is because
the board version of MX51 EVK doesn't keep synchronization
with kernel. So the card detect PIN is not configured well.
Here Bit 11-Bit 8 in system_rev indicates the board version.
The fix is to set Bit 11 -Bit8 as 1 for MX51 EVK board.
Signed-off-by: Lily Zhang <r58066@freescale.com>
|
|
|
|
|
|
|
| |
1. Change the drive strength of DRAM PAD as high
2. Change ESDCFG setting
Signed-off-by: Lily Zhang <r58066@freescale.com>
|
|
|
|
|
|
| |
mmu support for mx51 3stack and mx51 bbg.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
ubifs support for android recovery mode.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
MX35 can't boot due to wrong frequency setting.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
|
| |
In current u-boot design,
get_timer_masked is not correct and udelay is not accurate
when the time is less than 1000us.
Thus we need to use ipg clock source for accurate timer.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
| |
To enable MMU, it is porting from redboot.
Enable MMU and enable I/D cache.
Signed-off-by:Fred Fan <r01011@freescale.com>
|
|
|
|
|
|
| |
No 'boot up from' information when booting from NOR-SPI.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Update the priority list for MX25 MAX xbar.
Signed-off-by: Sammy He <r62914@freescale.com>
|
|
|
|
|
|
|
| |
1. Add imx cspi support for cpld access.
2. Add smc911x ethernet support from cpld.
Signed-off-by: Sammy He <r62914@freescale.com>
|
|
|
|
|
|
|
|
|
| |
This patch will fix three issues:
1. Add boot device detection.
2. Use right nand command in anroid for recovery mode.
3. Recovery mode code clean.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Misc changes for v2009.08 upgrade.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
| |
Workaround for ARM errata ID #468414, This erratum is
referenced in ARM Core Cortex-A8 Errata Notice [1], ID 468414.
Signed-off-by:Jason Liu <r64343@freescale.com>
(cherry picked from commit 549c17b69a5052c61a979ba679bd1dbd33a4153d)
|
|
|
|
|
|
| |
PATA support in u-boot.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Add mx51 bbg to3 support.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
| |
Syc clock and l2cc code with redboot.
Signed-off-by: Terry Lv <r65388@freescale.com>
(cherry picked from commit f712613010e3bf2c186f05a1b7381483d733b925)
|
|
|
|
| |
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
U-BOOT upgrade from V2009.01 to V2009.08
Initial version for i.MX51 BBG board.
Support:
FEC, SPI, spi Nor Flash
Boot from spi nor flash and mmc/sd
Signed-off-by:Fred Fan <r01011@freescale.com>
|
|
|
|
|
|
| |
I2C support for mx51 3ds board.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Recovery mode support for Android on mx51.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Copy babbage settings to 3stack
Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
|
|
|
|
|
|
|
|
| |
Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as
CFG_HZ. Change MAC address getting source from initial configuration to
On-Chip OTP.
Signed-off-by: Lionel Xu <r63889@freescale.com>
|
|
|
|
|
|
| |
Update mach-types for BBG board.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
|
|
| |
1. Support MMC/SD boot in uboot, however, it is disabled default and
user needs to enable manually by changing mx25_3stack.h;
2. Enable dhcp for network.
Signed-off-by: Sammy He <r62914@freescale.com>
|
|
|
|
|
|
| |
Add MMC configs to mx35 3stack config file.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Remove Watchdog disable codes in MX51 uboot.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Add FEC support for BBG2.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
BBG2, enable SPI NOR and MMC in one image.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
spi nor boot support for BBG2.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
BBG2: MMC boot support.
Signed-off-by: Terry Lv <r65388@freescale.com>
|
|
|
|
|
|
| |
Basic boot on BBG2 board.
Signed-off-by: r65388 <r65388@freescale.com>
|