summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* omap2420-h4: Fix booting from NOR flashHunter, Jon2013-04-08-15/+2
| | | | | | | | | | | | | | | | The omap2420-h4 board is using a RAM based address as the linker location for code. This is causing several problems when attempting to run the latest u-boot code base on this board from flash. Update the default linker location for code to be in NOR flash. Please note that OMAP maps the NOR flash to address 0x08000000 by default and so use this as the default address for the NOR flash. Also remove legacy code that attempts to calculate where in flash the sdata structure, that holds the memory interface configuration data, is located. By changing the default linker location for code to flash this is no longer necessary. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* omap2420-h4: Fix DRAM initialisationHunter, Jon2013-04-08-6/+18
| | | | | | | | | | The size of the DRAM for the omap2420-h4 board is getting setup in the dram_init() function. However, for the current u-boot release this is too late and needs to be done in dram_init_banksize(). Therefore, add a dram_init_banksize() function for the omap2420-h4 board and setup the DRAM size there. Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* asm/omap_gpmc.h: consolidate common definesAndreas Bießmann2013-04-08-2/+2
| | | | | | | | | | | | | arch/arm/include/asm/arch-am33xx/omap_gpmc.h and arch/arm/include/asm/arch-omap3/omap_gpmc.h are almost the same, consolidate the common parts into a new header. Introduce a new asm/omap_gpmc.h which defines the command part and pulls in the architecture specific one. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* pcm051: Enable DDR PHY dynamic power down bitLars Poeschel2013-04-08-1/+2
| | | | | | | | | | | This is done already for am335x in 59dcf970d11ebff5d9f4bbbde79fda584e9e7ad4 and also applies for pcm051. It powers down the IO receiver when not performing read which helps reducing the overall power consuption in low power states (suspend/standby). Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-04-34/+78
|\
| * Exynos: clock: Correct pwm source clk selectionPadmavathi Venna2013-04-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | MPLL is selected as the source clk of pwm by default Test with command "sf probe 1:0; time sf read 40008000 0 1000". Try with different numbers of bytes and see that sane values are obtained Build and boot U-boot with this patch, backlight works properly. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5: clock: Fix a typo bug in exynos clock initAkshay Saraswat2013-03-29-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | We intended to clear the bits of CLK_SRC_TOP2 register, instead we were writing on the reserved bits of src_core1 register. Since the default value of clk_src_top2 register were itself zero, this typo was not creating any big issue. But it is better to fix this error for better readability of the code. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos: clock: Fix a bug in PLL lock check conditionAkshay Saraswat2013-03-29-7/+7
| | | | | | | | | | | | | | | | | | | | | | The condition for testing of PLL getting locked was incorrect. Rectify this error in this patch. Reported-by: Alexei Fedorov <alexie.fedorov@arm.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SMDK5250: Fix compiler warning for non-dt systemsVivek Gautam2013-03-29-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Compiling for non-dt systems gives folowing warning: smdk5250.c: In function 'board_eth_init': smdk5250.c:152:6: warning: unused variable 'node' [-Wunused-variable] Declare variable 'node' only for dt enabled systems to remove this warning. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SMDK5250: Use statically defined structures only in non DT caseAjay Kumar2013-03-27-5/+9
| | | | | | | | | | | | | | | | | | | | Since we have DT support in exynos_fb and exynos_dp drivers now, we need not define any static structure or platform data related to display in the board file smdk5250.c. So, we place the already existing structures inside #ifndef CONFIG_OF_CONTROL block. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SMDK5250: Add device node for DPAjay Kumar2013-03-27-0/+15
| | | | | | | | | | | | | | Add DT bindings for DP supporting an eDP panel of size 2560x1600. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SMDK5250: Add device node for FIMDAjay Kumar2013-03-27-0/+25
| | | | | | | | | | | | | | Add DT bindings for FIMD supporting an eDP panel of size 2560x1600. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * video: exynos_dp: Remove callbacks from the driverAjay Kumar2013-03-27-1/+5
| | | | | | | | | | | | | | | | | | Replaced the functionality of callbacks by using a standard set of functions. Instead of implementing and hooking up a callback, put the same code in one of the standard set of functions by overriding it. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * video: exynos_fb: Remove callbacks from the driverAjay Kumar2013-03-27-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | Replaced the functionality of callbacks by using a standard set of functions. Instead of implementing and hooking up a callback, put the same code in one of the standard set of functions by overriding it. This patch is tested only on SMDK5250. For Trats and universal_c210 board, it is only compile tested. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-04-21/+312
|\ \
| * | i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe commandJavier Martinez Canillas2013-04-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | board/freescale/mx6qsabrelite/README explain a procedure to update the SPI-NOR on the SabreLite board without Freescale manufacturing tool but following this procedure leads to both "sf erase" and "sf write" failing on a mx6qsabrelite board: MX6QSABRELITE U-Boot > sf probe 1 MX6QSABRELITE U-Boot > sf erase 0 0x40000 SPI flash erase failed MX6QSABRELITE U-Boot > sf write 0x10800000 0 0x40000 SPI flash write failed This is because the chip-select 1 is wrong and the correct value is 0x7300. Since commit c1173bd0 ("sf command: allow default bus and chip selects") the chip-select and bus arguments for the sf probe command are optional so let's just remove it and use "sf probe" instead. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
| * | mx6: Fix get_board_rev() for the mx6 solo caseFabio Estevam2013-04-03-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When booting a Freescale kernel 3.0.35 on a Wandboard solo, the get_board_rev() returns 0x62xxx, which is not a value understood by the VPU (Video Processing Unit) library in the kernel and causes the video playback to fail. The expected values for get_board_rev are: 0x63xxx: For mx6quad/dual 0x61xxx: For mx6dual-lite/solo So adjust get_board_rev() accordingly and make it as weak function, so that we do not need to define it in every mx6 board file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * | mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a boardAbbas Raza2013-04-03-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maximum bus width supported by some i.MX6 boards is not 8bit like others. In case where both host controller and card support 8bit transfers, they agree to communicate on 8bit interface while some boards support only 4bit interface. Due to this reason the mmc 8bit default mode fails on these boards. To rectify this, define maximum bus width supported by these boards (4bit). If max_bus_width is not defined, it is 0 by default and 8bit width support will be enabled in host capabilities otherwise host capabilities are modified accordingly. It is tested with a MMCplus card. Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com> cc: stefano Babic <sbabic@denx.de> cc: Andy Fleming <afleming@gmail.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
| * | mx6qsabrelite: README: No need to pass 'u-boot.imx'Fabio Estevam2013-04-03-1/+1
| | | | | | | | | | | | | | | | | | | | | The u-boot.imx binary is generated by default, so no need to pass it in the 'make' line. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | mx6qsabre{sd,auto}: Add boot mode selectOtavio Salvador2013-04-03-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | Adds support for 'bmode' command which let user to choose where to boot from; this allows U-Boot to load system from another storage without messing with jumpers. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * | mx6qsabresd: Fix card detection for invalid card id caseOtavio Salvador2013-04-03-4/+10
| | | | | | | | | | | | | | | | | | | | | This changes the code so in case an unkown value is passed it will return as invalid. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * | mx6qsabresd: Document the mapping of USDHC[2-4]Otavio Salvador2013-04-03-0/+7
| | | | | | | | | | | | | | | | | | | | | This documents the SD card identifier so it is easier for user to spot which card number will be used, if need. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * | Add initial support for Wandboard dual lite and solo.Fabio Estevam2013-03-20-0/+250
| | | | | | | | | | | | | | | | | | | | | | | | | | | Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-28-148/+799
|\ \ \ | | |/ | |/| | | | | | | | | | | | | Conflicts: drivers/spi/tegra20_sflash.c include/fdtdec.h lib/fdtdec.c
| * | Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-26-131/+92
| |\ \
| | * | Tegra114: MMC: Add SD bus power-rail init routineTom Warren2013-03-25-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | T114 requires SD bus power-rail bringup for the SDIO card on SDMMC3. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| | * | Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config tableTom Warren2013-03-25-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SDIO1 (the SD-card slot on Dalmore) needs to have its pads setup before the MMC driver is added. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| | * | Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now)Tom Warren2013-03-25-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Took these values directly from the kernel dts files. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| | * | tegra114: dalmore: fdt: enable dalmore SPI controllerAllen Martin2013-03-25-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dalmore has a SPI flash part attached to controller 4, so enable controller 4 and set to 25MHz. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| | * | spi: add common fdt SPI driver interfaceAllen Martin2013-03-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a common interface to fdt based SPI drivers. Each driver is represented by a table entry in fdt_spi_drivers[]. If there are multiple SPI drivers in the table, the first driver to return success from spi_init() will be registered as the SPI driver. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| | * | tegra: spi: rename tegra SPI driversAllen Martin2013-03-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename tegra SPI drivers to tegra20_flash and tegra20_slink in preparation for commonization and addition of tegra114_spi. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| | * | tegra: remove support for UART SPI switchAllen Martin2013-03-25-130/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature was only used for tegra20 seaboard that had a pinmux conflict on the SPI pins. These boards were never manufactured, so remove this support to clean up SPI driver. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * | | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-26-3/+246
| |\ \ \ | | |/ / | |/| |
| | * | EXYNOS5: Add initial DTS file for Snow.Rajeshwari Shinde2013-03-12-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the DTS file for Snow Board. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos5: FDT: Add a H/W-trip member to TMU nodeAkshay Saraswat2013-03-12-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a member to TMU FDT node for providing hardware tripping temperature threshold. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos5: TMU: Add TMU init and status checkAkshay Saraswat2013-03-12-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds call to tmu_init() and TMU boot time analysis for the SoC temperature threshold breach. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | Exynos5: FDT: Add TMU device node valuesAkshay Saraswat2013-03-12-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fdt entry for Exynos TMU driver specific pre-defined values used for calibration of current temperature and defining threshold values. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | SMDK5250: FDT: Retrieve board model via DTRajeshwari Shinde2013-03-12-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Print out the board model by parsing the device tree file. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | EXYNOS5: GPIO to enable MAX98095Rajeshwari Shinde2013-03-08-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets high a GPIO to enable the codec MAX98095 Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | SMDK5250: Add PMIC voltage settingsRajeshwari Shinde2013-02-20-2/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds required pmic voltage settings for SMDK5250. Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | am335x_evm: Add better timings for the new BeagleBoard DDR3 partTom Rini2013-03-24-1/+38
| | | | | | | | | | | | | | | | | | | | Tested-by: Rao Bodapati <rao@circuitco.com> Signed-off-by: Tom Rini <trini@ti.com>
| * | | ti814x_evm: add ti814x evm board supportMatt Porter2013-03-24-0/+302
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add TI814X EVM board directory, config file, and MAINTAINERS entry. Enable build. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt to recent omap_hsmmc requirements, Matt re-tested] Signed-off-by: Tom Rini <trini@ti.com>
| * | | am33xx: refactor emif4/ddr to support multiple EMIF instancesMatt Porter2013-03-24-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AM33xx emif4/ddr support closely matches what is need to support TI814x except that TI814x has two EMIF instances. Refactor all the emif4 helper calls and the config_ddr() init function to use an additional instance number argument. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * | | am33xx: convert defines from am33xx-specific to generic namesMatt Porter2013-03-24-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate AM33xx specific names to prepare for TI814x support within AM33xx-land. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * | | am335x: Enable DDR PHY dynamic power down bit for DDR3 boardsVaibhav Hiremath2013-03-24-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable DDR PHY dynamic power down bit, which enables powering down the IO receiver when not performing read. This also helps in reducing overall power consumption in low power states (suspend/standby). Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Satyanarayana, Sandhya <sandhya.satyanarayana@ti.com> Cc: Tom Rini <trini@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * | | cm-t35: add support for loading splash image from NANDNikita Kiryanov2013-03-22-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for loading splash image from NAND Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * | | ARM: rpi_b: enable SD controller, add related env/cmdsStephen Warren2013-03-20-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the SD controller driver for the Raspberry Pi. Enable a number of useful MMC, partition, and filesystem-related commands. Set up the environment to provide standard locations for loading a kernel, DTB, etc. Provide a boot command that loads and executes boot.scr.uimg from the SD card; this is written considering future extensibilty to USB storage. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
| * | | ARM: rpi_b: use bcm2835 mbox driver to get memory sizeStephen Warren2013-03-20-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware running on the bcm2835 SoC's VideoCore CPU determines how much of the system RAM is available for use by the ARM CPU. Previously, U-Boot assumed that only 128MB was available, since this was the smallest value configured by any public firmware. However, we can now query the actual value at run-time from the firmware using the mbox property protocol. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | | | Merge branch 'spi' of git://git.denx.de/u-boot-x86Tom Rini2013-03-20-0/+11
|\ \ \ \ | |/ / / |/| | |
| * | | x86: Add FDT SPI node for linkSimon Glass2013-03-19-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | Add a memory-mapped 8GB SPI chip. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-11 10:03:18 +0000