summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* cm-t35: move the display code to common placeIgor Grinberg2013-11-01-2/+1
| | | | | | | | | Compulab OMAP3 boards use the same display initialization code. Move the display initialization code to live under board/compulab/common directory. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
* cm-t35: move the eeprom code to common placeIgor Grinberg2013-11-01-33/+69
| | | | | | | | | | Compulab boards use the same eeprom code, so move the eeprom related code to live under board/compulab/common directory. Also make several adjustments to eeprom functions namespace, so it will be generic for compulab boards. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
* tricorder: support 256MiB SDRAM on revision > DAndreas Bießmann2013-11-01-7/+38
| | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
* tricorder: add led supportAndreas Bießmann2013-11-01-6/+86
| | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
* tricorder: panic() on unknown boardAndreas Bießmann2013-11-01-0/+77
| | | | | | Also hang() the board on panic(). Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
* tricorder: add tricordereeprom commandAndreas Bießmann2013-11-01-1/+293
| | | | | | | The new tricordereeprom command can read and write the eeprom for hardware detection on tricorder devices. Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
* arm, da85x: update for the ipam390 boardHeiko Schocher2013-11-01-21/+10
| | | | | | | | | | | | - switch to correct ecc layout used by the RBL enable CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC - update default environment - change A2CR to correct value for UART boot mode - adapt cs3cfg timings for nand - change LED bootmode signalization Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
* am33xx, davinci: Create and use <asm/davinci_rtc.h>Tom Rini2013-11-01-0/+1
| | | | | | | Create a common header file for the RTC IP block that is shared between davinci and am33xx. Signed-off-by: Tom Rini <trini@ti.com>
* arm: Remove IXP425 boards pdnb3 and scpuStefan Roese2013-10-17-450/+0
| | | | | | | | | | Remove Prodrive pdnb3 board (including the scpu variant) support from mainline. As its unmaintained and not needed any more for quite some time. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Martijn de Gouw <martijn.de.gouw@prodrive.nl> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* Coding Style cleanup: drop some excessive empty linesWolfgang Denk2013-10-14-24/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup: remove trailing empty linesWolfgang Denk2013-10-14-7/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup: replace leading SPACEs by TABsWolfgang Denk2013-10-14-153/+153
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
* Coding Style cleanup: remove trailing white spaceWolfgang Denk2013-10-14-160/+160
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ARM: omap4-panda: Add MAC address creation for pandaDan Murphy2013-10-14-0/+16
| | | | | | | | Add a MAC address create based on the OMAP die ID registers. Then poplulate the ethaddr enviroment variable so that the device tree alias can be updated prior to boot. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-14-0/+559
|\
| * Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-10-11-0/+559
| |\
| | * samsung: trats2: add support for new board Trats2Piotr Wilczek2013-09-25-0/+547
| | | | | | | | | | | | | | | | | | | | | | | | This patch add support for a new Samsung board Trats2. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * samsung:common:i2c: add definions for third soft I2C adapter for Trats2 boardPiotr Wilczek2013-09-25-0/+12
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | km/scripts: fix ramfsAndreas Huber2013-10-09-1/+1
| | | | | | | | | | | | | | | | | | 'actual_bank' is not used anymore, instead boot_bank is used. Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
* | | powerpc/83xx: remove staticness for qe_iop_conf_tabHolger Brunck2013-10-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit a5510058 powerpc/83xx/km: make local functions and structs static removed the staticness also from this struct. But this struct is needed in arch/powerpc/cpu/mpc83xx/cpu_init.c and declared as extern. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* | | Merge branch 'next' of git://git.denx.de/u-boot-mpc83xxTom Rini2013-10-09-6/+11
|\ \ \
| * | | powerpc/83xx/km: make local functions and structs staticHolger Brunck2013-05-21-6/+6
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | powerpc/83xx/km: MV88e6122 errata fix for 1.9VHolger Brunck2013-05-21-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Errata Fix: 1.9V Output from Internal 1.8V Regulator, acc. MV-S300889-00D.pdf , clause 4.5 Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-08-562/+275
|\ \ \ \ | | |/ / | |/| |
| * | | socfpga: Adding pin mux handoff filesChin Liang See2013-10-07-0/+268
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding the generated pin mux configuration by Preloader Generator tool Signed-off-by: Chin Liang See <clsee@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Dinh Nguyen <dinguyen@altera.com> Cc: Wolfgang Denk <wd@denx.de> CC: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * | | socfpga: Adding System Manager driverChin Liang See2013-10-07-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding System Manager driver which will configure the pin mux for real hardware Cyclone V development kit (not Virtual Platform) Signed-off-by: Chin Liang See <clsee@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Dinh Nguyen <dinguyen@altera.com> Cc: Wolfgang Denk <wd@denx.de> CC: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * | | omap1510inn: arm925t: remove supportAlbert ARIBAUD2013-10-07-559/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap1510inn is orphan and has been for years now. Reove it and, as it was the only arm925t target, also remove arm925t support. Update doc/README.scrapyard accordingly. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * | | pcm051/igep0033: Supply bd_ram_ofs for cpsw driverLars Poeschel2013-10-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since 2bf36ac638ab2db9f0295aa47064976eeebf80c1 the BD ram address is not hardcoded inside cpsw driver any more. Platforms have to supply their bd_ram_ofs in the platform data to the driver. This commit does this for pcm051 and igep0033 boards. Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
| * | | ARM: IGEP0033: Update timing to run DDR at 400MHz.Enric Balletbo i Serra2013-10-07-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We can run the DDR at 400MHz, so update the timings for that purpose. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
* | | | dra7xx_evm: add SPL API, QSPI, and serial flash supportMatt Porter2013-10-07-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables support for SPI SPL, QSPI and Spansion serial flash device on the EVM. Configures pin muxes for QSPI mode. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-04-0/+15
|\ \ \ \ | |/ / /
| * | | ARM: VExpress: enable ARMv7 virt support for VExpress A15Andre Przywara2013-10-03-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To enable hypervisors utilizing the ARMv7 virtualization extension on the Versatile Express board with the A15 core tile, we add the required configuration variable. Also we define the board specific smp_set_cpu_boot_addr() function to set the start address for secondary cores in the VExpress specific manner. There is no need to provide a custom smp_waitloop() function here. This also serves as an example for what to do when adding support for new boards. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-02-43/+2529
|\ \ \ \ | |/ / /
| * | | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-10-02-43/+2383
| |\ \ \
| | * | | mx35pdk: Fix error handling in board_late_init()Fabio Estevam2013-09-27-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If smc911x_initialize() fails we should return the error immediately. While at it, also check the error from cpu_eth_init(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | mx28evk: Propagate the error if cpu_eth_init() failsFabio Estevam2013-09-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If cpu_eth_init() fails we should return the error immediately. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| | * | | mx28evk: Propagate the error if cpu_eth_init() failsFabio Estevam2013-09-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If cpu_eth_init() fails we should return the error immediately. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx28evk: Fix checkpatch warningFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following checkpatch warning: $ ./tools/checkpatch.pl -F board/freescale/mx28evk/mx28evk.c CHECK: Alignment should match open parenthesis #109: FILE: freescale/mx28evk/mx28evk.c:109: + writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN, + &clkctrl_regs->hw_clkctrl_enet); Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6slevk: Add Ethernet supportFabio Estevam2013-09-20-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6slevk has a SMSC8720 connected in RMII mode. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6qsabreauto: Return error if cpu_eth_init() failsFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently board_eth_init() always return 0, but we should propagate the error when cpu_eth_init() fails. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6sabresd: Return error if cpu_eth_init() failsFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently board_eth_init() always return 0, but we should propagate the error when cpu_eth_init() fails. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6sabresd: Reset counter to prevent error messageFabio Estevam2013-09-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a HDMI cable is not connected, the following message is seen on boot: CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: POR Board: MX6-SabreSD DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 No panel detected: default to HDMI unsupported panel HDMI Reset the 'i' variable to fix the 'unsupported panel' message. This follows the same idea of commit 47ac53d7ae (imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6sabresd: Avoid hang when HDMI cable is not connectedFabio Estevam2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the following hang happens if the HDMI cable is not connected or the 'panel' variable is not set: U-Boot 2013.10-rc2-12978-g47ac53d-dirty (Sep 11 2013 - 15:07:38) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: MX6-SabreSD DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 ... Provide a check to 'dev->detect' in order to prevent the hang. Reported-by: Pardeep Kumar Singla <b45784@freescale.com> Suggested-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2013-09-13-39/+263
| | |\ \ \ | | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | apf27: add FPGA support for the apf27 boardtrem2013-09-11-0/+257
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | apf27: add support for the armadeus APF27 boardtrem2013-09-11-0/+938
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Nicolas Colombain <nicolas.colombain@armadeus.com>
| | * | | imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skipRobert Winkler2013-09-10-1/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
| | * | | ARM: mxs: Add SanDisk Sansa Fuze+ boardMarek Vasut2013-09-10-0/+559
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add STMP3780-based Sansa Fuze+ board. This board is a small PMP device sporting a CPU which was later rebranded to i.MX233 . Currently supported is USB gadget mode and MMC . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * | | ARM: mxs: Add Creative ZEN XFi3 boardMarek Vasut2013-09-10-0/+389
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add STMP3780-based XFi3 board. This board is a small PMP device sporting a CPU which was later rebranded to i.MX233 . Currently supported is USB gadget mode and both external SD and internal Phison SD-NAND bridge . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * | | mx6sabresd: Add LVDS splash screen supportFabio Estevam2013-09-10-21/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6sabresd boards can be connected to a Hannstar XGA LVDS panel. Add support for displaying U-boot splashscreen on it. By default, HDMI splash is selected. In order to use splash via LVDS, do the following in the U-boot prompt: setenv panel Hannstar-XGA save and reboot. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-11-11 10:23:47 +0000