summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Enable ECC on LWMON5Stefan Roese2008-03-27-70/+20
| | | | | | | | | | | Since all ECC related problems seem to be resolved on LWMON5, this patch now enables ECC support. We have to write the ECC bytes by zeroing and flushing in smaller steps, since the whole 256MByte takes too long for the external watchdog. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Updates to Korat-specific codeLarry Johnson2008-03-27-53/+369
| | | | | | | | | | | | | | | | This patch contains updates for changes for the Korat PPC440EPx board. These changes include: (1) Support for "permanent" and "upgradable" copies of U-Boot, as described in the new "doc/README.korat" file; (2) a new memory map for the registers in the board's CPLD; (3) a revised format for manufacturer's data in serial EEPROM; and (4) changes to track updates to U-Boot for the Sequoia board. Signed-off-by: Larry Johnson <lrj@acm.org>
* ppc4xx: Add fdt support to Prodrive alprStefan Roese2008-03-27-1/+24
| | | | | | | | Since this board will probably be ported to arch/powerpc in the near future, we add device tree support now. This way we are "ready" for arch/powerpc from now on. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Enable cache support on the ALPR boardPieter Voorthuijsen2008-03-27-0/+9
| | | | Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
* ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)Stefan Roese2008-03-27-2/+0
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Correctly pass phyiscal FLASH base address into dtbStefan Roese2008-03-27-1/+1
| | | | | | | | | The routine ft_board_setup() configures the EBC NOR mappings for the Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS problem, we need to pass the corrected address here too. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add AMCC Glacier 406GT eval board supportStefan Roese2008-03-27-9/+16
| | | | | | | | | | | | | | This patch adds support for the AMCC Glacier 460GT eval board. The main difference to the Canyonlands board are listed here: - 4 ethernet ports instead of 2 - no SATA port - no USB port Currently EMAC2+3 are not working. This will be fixed in a later release. Signed-off-by: Stefan Roese <sr@denx.de>
* FSL: Clean up board/freescale/common/MakefileJon Loeliger2008-03-26-42/+28
| | | | | | | | | | | | | | | Each file that can be built here now follows some CONFIG_ option so that they are appropriately built or not, as needed. And CONFIG_ defines were added to various board config files to make sure that happens. The other board/freescale/*/Makefiles no longer need to reach up and over into ../common to build their individually needed files any more. Boards that are CDS specific were renamed with cds_ prefix. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Add the concept of CFG_CCSRBAR_PHYSKumar Gala2008-03-26-16/+16
| | | | | | | | | When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'new-image' of git://www.denx.de/git/u-boot-testingBartlomiej Sieka2008-03-26-175/+237
|\ | | | | | | | | | | | | | | | | Conflicts: common/cmd_bootm.c cpu/mpc8xx/cpu.c Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>Bartlomiej Sieka2008-03-19-11/+7
| | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot into new-imageMarian Balakowicz2008-03-12-335/+506
| |\
| * | [new uImage] Fix build problems on trab boardMarian Balakowicz2008-03-12-2/+2
| | | | | | | | | | | | Signed-off-by: Marian Balakowicz <m8@semihalf.com>
| * | [new uImage] Add new uImage format support to autoscript routineMarian Balakowicz2008-03-12-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | autoscript() routine is updated to accept second argument, which is only used for FIT images and provides a FIT subimage unit name. autoscript() routine callers must now pass two arguments. For non-interactive use (like in cmd_load.c, cmd_net.c), new environment variable 'autoscript_uname' is introduced and used as a FIT subimage unit name source. autoscript command accepts extended syntax of the addr argument: addr:<subimg_uname> Signed-off-by: Marian Balakowicz <m8@semihalf.com>
| * | [new uImage] Update naming convention for bootm/uImage related codeMarian Balakowicz2008-02-29-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the following prefix convention for the image format handling and bootm related code: genimg_ - dual format shared code image_ - legacy uImage format specific code fit_ - new uImage format specific code boot_ - booting process related code Related routines are renamed and a few pieces of code are moved around and re-grouped. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot into new-imageMarian Balakowicz2008-02-29-79/+43
| |\ \
| * | | [new uImage] Add dual format uImage support frameworkMarian Balakowicz2008-02-25-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds framework for dual format images. Format detection is added and the bootm controll flow is updated to include cases for new FIT format uImages. When the legacy (image_header based) format is detected appropriate legacy specific handling is invoked. For the new (FIT based) format uImages dual boot framework has a minial support, that will only print out a corresponding debug messages. Implementation of the FIT specific handling will be added in following patches. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
| * | | [new uImage] Rename and move print_image_hdr() routineMarian Balakowicz2008-02-21-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Marian Balakowicz <m8@semihalf.com>
| * | | Merge branch 'master' of /home/git/u-bootMarian Balakowicz2008-02-21-734/+1692
| |\ \ \
| * | | | [new uImage] Define a API for image handling operationsMarian Balakowicz2008-02-07-167/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add inline helper macros for basic header processing - Move common non inline code common/image.c - Replace direct header access with the API routines - Rename IH_CPU_* to IH_ARCH_* Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* | | | | 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller roleAnton Vorontsov2008-03-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux understands "host" (default), "peripheral" and "otg" (broken). Though, U-Boot doesn't restrict dr_mode variable to these values (think of renames in future). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | | | mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCIAnton Vorontsov2008-03-25-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen controller and FHCI (QE USB). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* | | | | mpc83xx: MPC8360E-RDK: add support for NANDAnton Vorontsov2008-03-25-1/+75
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* | | | | 83xx: initialize serdes for MPC837XRDB boardsAnton Vorontsov2008-03-25-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the MPC8377ERDB: 2 SATA and 2 PCI-E. On the MPC8378ERDB: 2 PCI-E On the MPC8379ERDB: 4 SATA Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* | | | | 83xx: Add Vitesse VSC7385 firmware uploadingTimur Tabi2008-03-25-6/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. Cleaned up the board header files to make selecting the VSC7385 easier to control. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | | | Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk2008-03-26-1/+28
|\ \ \ \ \
| * | | | | [MIPS] Introduce _machine_restartShinya Kuribayashi2008-03-25-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handles machine specific functions by using weak functions. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
| * | | | | [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()Shinya Kuribayashi2008-03-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move things to appropriate place. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* | | | | | FSL: Move board/mpc8266ads under board/freescaleJon Loeliger2008-03-25-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | | | FSL: Move board/mpc7448hpc2 under board/freescaleJon Loeliger2008-03-25-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | | | FSL: Move board/mpc8260ads under board/freescaleJon Loeliger2008-03-25-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | | | net/Blackfin: move on-chip MAC driver into drivers/net/Mike Frysinger2008-03-25-621/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board directory, but it is not board specific, so relocate it to the drivers dir so that other Blackfin ports can utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | | | | 8xx : Add OF support to Adder875 board port - resubmitBryan O'Donoghue2008-03-25-0/+11
|/ / / / / | | | | | | | | | | | | | | | Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
* | | | | LWMON5: POST RTC fixYuri Tikhonov2008-03-20-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the RTC API to provide one a status for the time reported by the rtc_get() function: 0 - a reliable time is guaranteed, < 0 - a reliable time isn't guaranteed (power fault, clock issues, and so on). The RTC chip drivers are responsible for providing this info if the corresponding chip supports such functionality. If not - always report that the time is reliable. The POST RTC test was modified to detect the RTC faults utilizing this new rtc_get() feature. Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* | | | | Fix backlight in the lwmon5 POST.Yuri Tikhonov2008-03-18-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backlight was switched on even when temperature was too low. Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* | | | | Add support for the lwmon5 board reset via GPIO58.Yuri Tikhonov2008-03-18-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* | | | | The patch adds new POST tests for the Lwmon5 board. These are:Yuri Tikhonov2008-03-18-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * External Watchdog test; * dsPIC tests; * FPGA test; * GDC test; * Sysmon tests. Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
* | | | | Merge branch 'master' of git://www.denx.de/git/u-boot-blackfinWolfgang Denk2008-03-18-597/+1
|\ \ \ \ \
| * | | | | Blackfin: BF537-stamp: drop board-specific flash driver for CFIMike Frysinger2008-03-15-527/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The parallel flash on the BF537-STAMP is CFI compliant, so there is no need for the board specific driver at all. Just use the common CFI driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | | | Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPUMike Frysinger2008-03-15-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stop tying things to the processor that should be tied to other defines and change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build system to select the -mcpu option. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | | | Blackfin: move bootldr command to common codeMike Frysinger2008-03-15-45/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the Blackfin-common bootldr command out of the BF537-STAMP specific board directory and into the common directory so that all Blackfin boards may utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | | | | HMI1001: fix compile problem.Wolfgang Denk2008-03-18-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | Conding style cleanupWolfgang Denk2008-03-16-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval boardStefan Roese2008-03-15-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds USB OHCI support to the Canyonlands board port. It also enables EXT2 support. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | ppc4xx: Add Canyonlands NAND booting supportStefan Roese2008-03-15-17/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 460EX doesn't support a fixed bootstrap option to boot from 512 byte page NAND devices. The only bootstrap option for NAND booting is option F for 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap EEPROM needs to be programmed accordingly. This patch adds basic NAND booting support for the AMCC Canyonlands aval board and also adds support to the "bootstrap" command, to enable NAND booting I2C setting. Tested with 512 byte page NAND device (32MByte) on Canyonlands. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)Stefan Roese2008-03-15-0/+915
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AMCC Canyonlands 460EX evaluation board. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | ppc4xx: program_tlb now uses 64bit physical addessStefan Roese2008-03-15-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the physical addess parameter from 32bit to 64bit. This is needed for 36bit 4xx platforms to access areas located beyond the 4GB border, like SoC peripherals (EBC etc.). Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | ppc4xx: Add 405GPr based MCU25 board specific filesNiklaus Giger2008-03-15-0/+499
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | | | | | ppc4xx: HCU4/5. remove obsolete hcu_flash.cNiklaus Giger2008-03-15-514/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | | | | | ppc4xx: HCU4/5. Use FLASH_CFI_LEGACYNiklaus Giger2008-03-15-2/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with the FLASH_CFI_LEGACY et al. config options. Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
generated by cgit v1.1 at 2024-12-02 09:11:41 +0000