summaryrefslogtreecommitdiff
path: root/board/xilinx
Commit message (Collapse)AuthorAgeLines
* ppc44x: Unification of virtex5 pp440 boardsRicardo Ribalda Delgado2008-09-05-145/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides an unificated way of handling xilinx v5 ppc440 boards. It unificates 3 different things: 1) Source code A new board called ppc440-generic has been created. This board includes a generic tlb initialization (Maps the whole memory into virtual) and defines board_pre_init, checkboard, initdram and get_sys_info weakly, so, they can be replaced by specific functions. If a new board needs to redefine any of the previous functions (specific initialization) it can create a new directory with the specific initializations needed. (see the example ml507 board). 2) Configuration file Common configurations are located under configs/xilinx-ppc440.h, this header file interpretes the xparameters file generated by EDK and configurates u-boot in correspondence. Example: if there is a Temac, allows CMD_CONFIG_NET Specific configuration are located under specific configuration file. (see the example ml507 board) 3) Makefile Some work has been done in order to not duplicate work in the Main Makefile. Please see the attached code. In order to support new boards they can be implemented in the next way: a) Simple Generic Board (90% of the time) Using EDK generates a new xparameters.h file, replace ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config && make b) Simple Boards with special u-boot parameters (9 % of the time) Create a new file under configs for it (use ml507.h as example) and change your paramaters. Create a new Makefile paragraph and compile c) Complex boards (1% of the time) Create a new folder for the board, like the ml507 Finally, it adds support for the Avnet FX30T Evaluation board, following the new generic structure: Cheap board by Avnet for evaluating the Virtex5 FX technology. This patch adds support for: - UartLite - 16MB Flash - 64MB RAM Prior using U-boot in this board, read carefully the ERRATA by Avnet to solve some memory initialization issues. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: ML507: Environment in flash and MTD SupportRicardo Ribalda Delgado2008-07-30-1/+1
| | | | | | | | | - Relocate the location of U-Boot in the flash - Save the environment in one sector of the flash memory - MTD Support Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: ML507: Use of get_ram_size in board ml507Ricardo Ribalda Delgado2008-07-30-2/+3
| | | | | | | - Change suggested by WD Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: ML507: U-Boot in flash and System ACERicardo Ribalda Delgado2008-07-30-9/+167
| | | | | | | | This patch allows booting from FLASH the ML507 board by Xilinx. Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: ML507 Board SupportRicardo Ribalda Delgado2008-07-18-0/+339
| | | | | | | | | | | | | | | | | | | | | The Xilinx ML507 Board is a Virtex 5 prototyping board that includes, among others: -Virtex 5 FX FPGA (With a ppc440x5 in it) -256MB of SDRAM2 -32MB of Flash -I2C Eeprom -System ACE chip -Serial ATA connectors -RS232 Level Conversors -Ethernet Transceiver This patch gives support to a standard design produced by EDK for this board: ppc440, uartlite, xilinx_int and flash - Includes Changes propossed by Stefan Roese and Michal Simek Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Stefan Roese <sr@denx.de>
* Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errorsWolfgang Denk2008-07-03-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Cleanup out-or-tree building for some boards (.depend)Wolfgang Denk2008-07-02-3/+3
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Change initdram() return type to phys_size_tBecky Bruce2008-06-12-1/+1
| | | | | | | | | | | | | | | | | | | This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* ppc4xx: Remove superfluous dram_init() call or replace it by initdram()Stefan Roese2008-06-03-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese <sr@denx.de>
* Big white-space cleanup.Wolfgang Denk2008-05-21-15/+15
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Remove all the search paths from the .lds files.Jason Wessel2008-04-17-2/+0
| | | | | | | The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
* microblaze: clean uart16550 and uartlite handlingMichal Simek2008-04-08-4/+4
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: remove old setting for emac driverMichal Simek2008-04-08-14/+2
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Clean Makefile from ancient emac driverMichal Simek2008-04-08-32/+2
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-12-1/+1
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Rework of 4xx serial driver (2)Stefan Roese2007-10-31-1/+1
| | | | | | | | | | Change all linker scripts to reference the changed driver name 4xx_uart.o. Note: In most cased all these explicit referencing of these object files in the linker scripts is not neccessary. Only for manually embedded environment into the U-Boot image, which is not done is most cases. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xxStefan Roese2007-10-31-1/+1
| | | | | | | | | | This patch moves some common 4xx macros and the PPC405_SYS_INFO/ PPC440_SYS_INFO structure into the common ppc4xx.h header. Lot's of other macros are good candidates to be consolidated this way in the future. Signed-off-by: Stefan Roese <sr@denx.de>
* Synchronize with U-BOOT mainlineMichal Simek2007-09-15-21/+33
|
* Merge git://www.denx.de/git/u-bootMichal Simek2007-08-07-2/+2
|\
| * board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-1/+1
| | | | | | | | | | | | | | | | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * board/[q-z]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-1/+1
| | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * Fix a few file permission problems.Wolfgang Denk2007-07-04-0/+0
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | [FIX] Change configuration for XUPV2P Microblaze boardMichal Simek2007-08-05-33/+21
| |
* | [FIX] fix microblaze file permitissionMichal Simek2007-06-17-0/+0
|/
* Merge git://www.denx.de/git/u-bootMichal Simek2007-05-08-1/+1
|\ | | | | | | | | | | | | Conflicts: include/asm-microblaze/microblaze_intc.h include/linux/stat.h
| * Minor coding style cleanup.Wolfgang Denk2007-04-04-1/+1
| |
* | new: USE_MSR_INTR supportMichal Simek2007-05-07-1/+2
| |
* | new: fsl interrupt supportMichal Simek2007-05-07-1/+21
| | | | | | | | FSL_Has_data is connected to INTC.
* | new: add writing to msr registerMichal Simek2007-05-07-15/+19
| |
* | new: FSL and MSR support #2Michal Simek2007-05-05-0/+3
| |
* | Change ML401 parameters - Xilinx BSPMichal Simek2007-04-21-13/+13
|/
* [PATCH] Clean include dependenceMichal Simek2007-03-30-2/+2
|
* PATCH: Resolve GPL license problemMichal Simek2007-03-27-24/+97
|
* Support for XUPV2P boardMichal Simek2007-03-26-78/+297
| | | | | Reset support BSP autoconfig support
* [Microblaze][PATCH] part 2Michal Simek2007-03-11-0/+4
| | | | | | | | | | | | | timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401
* [Microblaze][PATCH]Michal Simek2007-03-11-0/+265
| | | | | | | | | | | | | timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401
* [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targetsGrant Likely2007-02-20-8/+7
| | | | | | | | | Change the xilinx device drivers and board code to include config.h instead of xparameters.h directly. config.h always includes the correct xparameters file. This change reduces the posibility of including the wrong file when adding a new xilinx board port Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-09-1/+1
| | | | Based on patch by Mike Frysinger, 20 Jun 2006
* Add support for a saving build objects in a separate directory.Marian Balakowicz2006-09-01-7/+19
| | | | | | | | | | | | | | | | | | | | | Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
* GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk2006-03-31-2/+2
|
* Remove board specific configuration includes from the common xilinxWolfgang Denk2006-03-12-2/+0
| | | | | ethernet and iic adapter code. Patch by Michael Libeskind, 12 Jul 2005
* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)Stefan Roese2006-01-18-1/+1
| | | | Patch by Stefan Roese, 18 Jan 2006
* (no commit message)Wolfgang Denk2005-12-12-0/+3
|
* Cleanup for GCC-4.xWolfgang Denk2005-10-13-23/+23
|
* Fix problems with ld version 2.16 (dot outside sections problem)Wolfgang Denk2005-08-31-0/+2
| | | | | Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.cStefan Roese2005-08-16-1/+1
| | | | | now handling all 4xx cpu's. Patch by Stefan Roese, 16 Aug 2005
* * Patch by Jon Loeliger, 02 Sep 2004:wdenk2005-01-09-1/+1
| | | | | | | | | | | | | | Reset monitor size back to 256 so environment can be written to flash on MPC85xx ADS and CDS releases. * Patch by Paolo Broggini, 02 Sep 2004: Make BSS clearing on ARM systems more robust * Patch by Yue Hu and Joe, 01 Sep 2004: - add PCI support for ixp425; - add EEPRO100 suppor tfor ixdp425 board. * Fix problem with protected sector detection in driver/cfi_flash.c
* * Code cleanup, mostly for GCC-3.3.xwdenk2004-12-31-2/+3
| | | | | | | | | | | | * Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
* * Patch by Sean Chang, 9 Aug 2004:wdenk2004-09-29-146/+1673
| | | | | | | | | | | | | | | | | | - Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
generated by cgit v1.1 at 2024-12-26 06:52:42 +0000