summaryrefslogtreecommitdiff
path: root/board/xilinx
Commit message (Collapse)AuthorAgeLines
* ARM64: zynqmp: Remove netdev.h from board fileMichal Simek2016-04-13-1/+0
| | | | | | | | | | | | | | | | Including netdev.h is causing compilation warning: + int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int)); + ^ w+In file included from ../board/xilinx/zynqmp/zynqmp.c:9:0: w+../include/netdev.h:204:41: warning: ‘struct eth_device’ declared inside parameter list [enabled by default] w+../include/netdev.h:204:41: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] This patch removes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Make DDR detection code work on 32bit systemMichal Simek2016-04-13-3/+3
| | | | | | | Define u64 types to be usable on 32bit system because of 64bit address and size cells and 32bit shifts in the code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: Support systems with more memory banksMichal Simek2016-04-13-12/+120
| | | | | | | This is example how to change u-boot to support more memory banks read from DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* block: Add support for Ceva sataMichal Simek2016-04-04-0/+4
| | | | | | | Initial Ceva Sata init code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM64: zynqmp: Simplify MAINTAINERS file to support more boardsMichal Simek2016-04-04-4/+3
| | | | | | Handle all Xilinx ZynqMP boards with one fragment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Read RAM information from DTMichal Simek2016-04-04-0/+121
| | | | | | | | | | | | | | | Read information about memory from DT. This patch simplify life with synchronization between DT and board files. dram_init() only needs maximum RAM size below 4GB that's why please sort banks in memory node. dram_init_banksize() copies memory setup to bi_dram[]. This will avoid reading information from DT twice. Memory test start/end were changed to DDR location to let memtest still compiled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove !OF_CONTROL code for timer and interruptMichal Simek2016-04-04-11/+0
| | | | | | OF_CONTROL is enabled by default that's why this is dead code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBOMichal Simek2016-04-04-244/+1342
| | | | | | | | | There is incorrect setting for USB which didn't work with origin ps7_init_gpl.X files. Use default setting for Digilent Zybo projects with HDMI in PL. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Allow to set the MAC from an EEPROMJoe Hershberger2016-04-04-0/+13
| | | | | | | | | | Provide board specific option how to read MAC address from ROM. Do it in generic way to be reusable by differnet boards. If this is not enough board specific functions can be created. Signed-off-by: Joe Hershberger <joe.hershberger@gmail.com> # driver part Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: Read memory size setting from DTMichal Simek2016-02-22-4/+0
| | | | | | | OF_CONTROL is setup by default and memory reading is done via DT. Remove all config files with memory references. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx-ppc440-generic: Wire LL_TEMAC driverRicardo Ribalda Delgado2016-01-27-0/+26
| | | | | | | | | | | If the xparameters file contains a LL_TEMAC definition compile its driver and the net commands. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx_ppc440_generic: Remove uncalled functionsRicardo Ribalda Delgado2016-01-27-5/+0
| | | | | | | | | | | | board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx_ppc405_generic: Remove uncalled functionsRicardo Ribalda Delgado2016-01-27-5/+0
| | | | | | | | | | | | board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx_ppc440_generic: Remove weak attributesRicardo Ribalda Delgado2016-01-27-11/+7
| | | | | | | | | | | | | | Now that the specific boards have been removed there is no need to maintain the weak functions. Fix also CamelCase to make checkpatch happy Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx_ppc405_generic: Remove weak attributesRicardo Ribalda Delgado2016-01-27-14/+8
| | | | | | | | | | | | | | Now that the specific boards have been removed there is no need to maintain the weak functions. Fix also CamelCase to make checkpatch happy Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx-ppc4xx: Port to DM serialRicardo Ribalda Delgado2016-01-27-2/+8
| | | | | | | | | | | xilinx_uartlite has been ported to DM, this patch makes the xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new DM driver. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: zynqmp: Line up checkboard messageMichal Simek2016-01-27-2/+2
| | | | | | | | | Use space instead of tab in checkboard print to aligned it with others boards. Reported-by: David Glessner <david.glessner@rockwellcollins.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
* ARM64: zynqmp: Remove unneeded timer_init functionMichal Simek2016-01-27-5/+0
| | | | | | Empty weak function is used instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Fix bootmode SD_MODE1Michal Simek2016-01-27-1/+4
| | | | | | | | | | | | | When only sdhci1 IP is enabled and SD_MODE1 bootmode is selected U-Boot using sdboot1 variable which refers to mmc dev 1. But this device doesn't exist because only one controller is available. This patch fix logic around sdboot mode with using sdbootdev internal variable. Reported-by: Chris Kohn <ckohn@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Differentiate EMMC boot modeMichal Simek2016-01-27-1/+4
| | | | | | | | Show also EMMC bootmode if selected. There is difference compare to SD bootmode. Use the same bootcommand till better boot command is created. Reported-by: Sai Pavan Boddu <saipava@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Show information about bootmodeMichal Simek2016-01-27-1/+7
| | | | | | | Showing information about bootmode is very useful to make sure that correct bootmode is selected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Add support for SD1 boot modeMichal Simek2016-01-27-0/+6
| | | | | | | SD1 boot mode is using different bootmode values. Add support for this mode used on DC1. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Modify the SD and QSPI bootmode valuesSiva Durga Prasad Paladugu2016-01-27-0/+7
| | | | | | | | Modify the SD bootmode value to 0x3 as per latest spec. Also add new boot mode QSPI 32 bit boot mode Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM64: zynqmp: Use the same U-Boot version with/without ATFMichal Simek2016-01-27-4/+13
| | | | | | | | Remove SECURE_IOU option which is not needed. U-Boot itself can detect which EL level it is on and based on that use do platform setup. It also simplify usage because one Kconfig entry is gone. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Fix board_init calling sequenceMichal Simek2016-01-27-2/+4
| | | | | | | board_init() is in final elf file but it is not called at all. Use board_init_late() instead and call gpio_init() from it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Read information about RAM from DTMichal Simek2016-01-27-13/+0
| | | | | | Do not setup ram start/size in board file. Read it from DT instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove systemace from board fileMichal Simek2016-01-27-5/+0
| | | | | | | Systemace is ancient IP which is not tested. Remove it from default configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: emaclite: Move emaclite to KconfigMichal Simek2016-01-27-3/+0
| | | | | | | Add PHYLIB and MII dependencies and enable it by default for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: emaclite: Move driver to DMMichal Simek2016-01-27-41/+0
| | | | | | | Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: axi_emac: Move driver to DMMichal Simek2016-01-27-9/+0
| | | | | | | Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* microblaze: Remove unused I2C macrosMichal Simek2016-01-27-5/+0
| | | | | | There is no i2c driver in the current u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* serial: uartlite: Add uartlite to KconfigMichal Simek2016-01-27-4/+0
| | | | | | | | - Move config option out of board file. - Remove uartlite address from config file Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
* ppc: xilinx-ppc4xx-generic: Update xparameters.hRicardo Ribalda Delgado2016-01-27-8/+8
| | | | | | | | | | | -Remove UART address (It is now part of the dts). -Include dummy ns16550 clock -Fix address to last test Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: pp440-generic: Simplify MakefileRicardo Ribalda Delgado2016-01-27-2/+2
| | | | | | | | | | | | As a result of the specific board removal, the Makefiles can be simplified. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: pp405-generic: Simplify MakefileRicardo Ribalda Delgado2016-01-27-1/+1
| | | | | | | | | | | | As a result of the specific board removal, the Makefiles can be simplified. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* mailaddr: Update mail addressRicardo Ribalda Delgado2016-01-27-9/+9
| | | | | | | | | | | The old mail address will stop working soon. Update it all the files Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* ppc: xilinx-ppc440: Remove support for ml507Ricardo Ribalda Delgado2016-01-27-70/+0
| | | | | | | | | | | ml507 is just a specialized version of the xilinx-ppc440-generic Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: move CONFIG_SYS_TEXT_BASE to defconfigMasahiro Yamada2016-01-20-2/+0
| | | | | | | This is how CONFIG options are defined by Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-96/+8
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* microblaze: Do not handle watchdog and gpio in SPLMichal Simek2015-12-18-1/+2
| | | | | | watchdog and gpio are not validated for SPL that's why do not use them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove support for LL_TEMACMichal Simek2015-12-18-41/+0
| | | | | | | LL_TEMAC is available at big endian MB and it is not properly tested that's why the patch removes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: zynq: Add default ps7_init_gpl.c/h for ZYBONathan Rossi2015-12-18-0/+12046
| | | | | | | | | | | | | | | | | Add ps7_init_gpl.c/h for the ZYBO board. This instance of the ps7_init is generated by the Vivado 2015.3 tools using the system configuration provided by Digilent located on their website. Update the kconfig so that the defconfig is not overrided to use the custom init ps7_init_gpl target by default. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* zynq: sdhci: Move driver to DMMichal Simek2015-12-07-39/+0
| | | | | | | Move driver to DM Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* net: gem: Move driver to DMMichal Simek2015-12-07-38/+0
| | | | | | | | | | | | | - Enable DM_ETH by default for Zynq and ZynqMP - Remove board_eth_init code - Change miiphy_read function to return value instead of error code based on DM requirement - Do not enable EMIO DT support by default Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* ARM: zynq: Remove zc70x targetMichal Simek2015-11-04-10/+0
| | | | | | | | Remove zc70x target which was one setting for zc702 and zc706. Currently zc702 and zc706 are separated. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* zynqmp: usb: Add usb dwc3 driver support for zynqmpSiva Durga Prasad Paladugu2015-08-19-0/+28
| | | | | | | | | | Added usb dwc3 driver support for zynqmp this also supports the DFU and LTHOR to download the linux images on to RAM and cen be booted from those linux images. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* board: Xilinx: zynqmp: Define checkboard() functionSiva Durga Prasad Paladugu2015-08-19-0/+6
| | | | | | | Define checkboard() function for zynqMP Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* zynq: Fix typo in Makefile about custom ps7_init fileMichal Simek2015-07-28-1/+1
| | | | | | Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* zynqmp: Show EL level where U-Boot runsMichal Simek2015-07-28-0/+2
| | | | | | Add one more print to make clear which EL level U-Boot runs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>