summaryrefslogtreecommitdiff
path: root/board/ti
Commit message (Collapse)AuthorAgeLines
* ti_omap5_common: Find right dtb file for DRA72-RevC EvmLokesh Vutla2016-07-01-3/+7
| | | | | | DRA72-Evm revC uses dra72-evm-revc.dtb. Update the same in env vatiables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM437x: Align HS device variant defconfig filenameAndreas Dannenberg2016-07-01-1/+2
| | | | | | | | | | | | | | Align the name of the defconfig file for high-security (HS) device variants from the AM43xx family of SoCs with the corresponding name used for the general purpose devices. This allows for easier cross-association of those files and also provides room to grow from an HS device part number perspective. Furthermore, update and cleanup associated MAINTAINERS file. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Madan Srinivas <madans@ti.com>
* Kconfig: make NOR_BOOT a common optionPeng Fan2016-06-27-9/+0
| | | | | | | | | | | | | | | | Not only am335x supports booting from NOR, i.MX6 SoCs also supports booting from NOR. Make NOR_BOOT a common option to let different SoCs share it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Christophe Ricard <christophe-h.ricard@st.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Francois Retief <fgretief@spaceteq.co.za> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* board: am437x-hs: spl: Select right dtb from fitLokesh Vutla2016-06-13-1/+1
| | | | | | | Select a right dtb from FIT for am437x-hs platform. Reported-by: Madan Srinivas <madans@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM572x-IDK Initial SupportSchuyler Patton2016-06-13-0/+2
| | | | | | | | | Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: am57xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-06-13-0/+12
| | | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs away to detect the right dtb to be used. Adding support for the same for am57xx platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVMLokesh Vutla2016-06-13-1/+1
| | | | | | | | | board/am57xx supports all boards based on am57xx. Rename the taget as TARGET_AM57XX_EVM. Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* arm: dra7xx: Assign omap_vcores based on board typeKeerthy2016-06-12-0/+91
| | | | | | | | | | Currently omap_vcores which holds pmic data is being assigned based on the SoC type. PMIC is not a part of SoC. It is logical to to assign omap_vcores based on board type. Hence over ride the vcores_init function and assign omap_vcores based on the board type. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
* ARM: DRA7xx: Enable FIT for hs platformsLokesh Vutla2016-06-06-0/+1
| | | | | | | Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Configure reset mux to device resetLokesh Vutla2016-06-02-0/+16
| | | | | | | | | | | | | | | | | BOOTCFG_RSTMUX8 register controls the reset mux associated with the ARM. Timer5(dedicated to ARM) when used as WatchDog timer, the events it generates are routed to the above mux. Following are the 3 events that can controlled bt the reset mux: - Device Reset - An interrupt to the ARM_GIC - An interrupt to the ARM_GIC followed by a device reset. Right now to give a default watchdog behaviour "Device reset" is being selected. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com>
* arm: am57xx: Fix alignment where necessaryKeerthy2016-06-02-45/+45
| | | | | | This just fixes alignment for better readability. Signed-off-by: Keerthy <j-keerthy@ti.com>
* arm: am57xx: Fix omap_vcores assignment for am572x-idkKeerthy2016-06-02-1/+44
| | | | | | | | | | Currently omap_vcores is wrongly assigned a default value of beagle_x15_volts. Hence populating a new structure for am572x-idk and assigning it to omap_vcores in the vcores_init function. Fixes: c020d355c45ed40fe12a ("board: ti: am57xx: Add support for am572x idk in SPL") Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
* ARM: DRA7: Consolidate voltage macros across different SoCsAnna, Suman2016-06-02-5/+5
| | | | | | | | | | | | | The voltage values for each voltage domain at an OPP is identical across all the SoCs in the DRA7 family. The current code defines one set of macros for DRA75x/DRA74x SoCs and another set for DRA72x macros. Consolidate both these sets into a single set. This is done so as to minimize the number of macros used when voltage values will be added for other OPPs as well. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7: Define common macros for efuse register offsetsAnna, Suman2016-06-02-5/+5
| | | | | | | | | | | | | | Define a set of common macros for the efuse register offsets (different for each OPP) that are used to get the AVS Class 0 voltage values and ABB configuration values. Assign these common macros to the register offsets for OPP_NOM by default for all voltage domains. These common macros can then be redefined properly to point to the OPP specific efuse register offset based on the desired OPP to program a specific voltage domain. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM57xx: AM43xx: Fix USB hostRoger Quadros2016-06-02-57/+55
| | | | | | | | | | | | | CONFIG_USB_XHCI_OMAP can be set for host mode without setting CONFIG_USB_DWC3 which is meant for gadget mode only. board_usb_init() was not being defined for CONFIG_USB_XHCI_OMAP resulting in a data abort on usb start. Define board_usb_init() for CONFIG_USB_XHCI_OMAP case. Move gadget specific handling to within CONFIG_USB_DWC3. Fixes: 6f1af1e358b7 ("board: ti: invoke clock API to enable and disable clocks") Signed-off-by: Roger Quadros <rogerq@ti.com>
* board: am335x: Allow to choose serial device dynamicallyLokesh Vutla2016-05-27-0/+11
| | | | | | | | Different AM335x based platforms have different serial consoles. As serial console is Kconfig option a separate defconfig has to be created for each platform. So pass the serial device dynamically. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM335x-ICEv2: Add minimal dts supportLokesh Vutla2016-05-27-0/+2
| | | | | | | | Add minimal dts support for AM335x-ICEv2 board Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
* board: AM335x-ICEv2: Add cpsw supportLokesh Vutla2016-05-27-7/+80
| | | | | | | | | | | | | | | | | | | | | | In order to enable cpsw on AM335x ICEv2 board, the following needs to be done: 1)There are few on board jumper settings which gives a choice between cpsw and PRUSS, that needs to be properly selected[1]. Even after selecting this, there are few GPIOs which control these muxes that needs to be held high. 2) The clock to PHY is provided by a PLL-based clock synthesizer[2] connected via I2C. This needs to properly programmed and locked for PHY operation. And PHY needs to be reset before before being used, which is also held by a GPIO. 3) RMII mode needs to be selected. [1] http://www.ti.com/lit/zip/tidr336 [2] http://www.ti.com/lit/ds/symlink/cdce913.pdf Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: AM335x-ICEv2: Add DDR dataLokesh Vutla2016-05-27-1/+40
| | | | | | | | | AM335x ICEv2 contains a 2Gbit(128Mx16) of DDR3 SDRAM(MT41J128M16JT-125), capable of running at 400MHz. Adding this specific DDR configuration details running at 400MHz. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: AM335x-ICEv2: Add pinmux supportLokesh Vutla2016-05-27-0/+31
| | | | | | | Add necessary pinmux support for AM335x ICEv2 board. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: AM335x-ICEv2: Add epprom supportLokesh Vutla2016-05-27-0/+5
| | | | | | | | | Similar to other TI's AM335x platforms, AM335x ICEv2 also has an eeprom populated for its unique identification. Adding this info so that AM335x ICEv2 specific initialization can be done. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM335x-BBG: Add initial supportLokesh Vutla2016-05-27-0/+2
| | | | | | | Add initial DTS support for AM335x-BBG Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM335x-evmsk: Add initial supportLokesh Vutla2016-05-27-0/+2
| | | | | | | Add initial DTS support for AM335x-evm sk. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM335x: Enable FITLokesh Vutla2016-05-27-1/+0
| | | | | | | Use a single defconfig for all AM335x platforms by enabling FIT Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: am33xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+14
| | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: dts: AM437x-IDK Initial SupportLokesh Vutla2016-05-27-0/+2
| | | | | | | Add initial DTS support for AM437x-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM43x-EPOS Initial SupportLokesh Vutla2016-05-27-0/+2
| | | | | | | Add initial DTS support for AM43-EPOS evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM43xx: Enable FITLokesh Vutla2016-05-27-2/+0
| | | | | | | | Use a single defconfig for all AM43xx platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: AM43xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+12
| | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7: configs: Remove obsolete configsLokesh Vutla2016-05-27-2/+0
| | | | | | | | | | | | | | | | | Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed. qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7: Enable FITLokesh Vutla2016-05-27-2/+0
| | | | | | | | Use a single defconfig for all DRA7 platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: dra7: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+12
| | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: omap5: add ft_board_setup for dra7xx/am57xxDaniel Allred2016-05-27-0/+18
| | | | | | | | | | | | | | Adds the board specific ft_board_setup() functions that are called when CONFIG_OF_BOARD_SETUP is defined. These functions will currently just call the ft_cpu_setup() function. Adds CONFIG_OF_BOARD_SETUP to the defconfig files for dra72_evm, dra74_evm, and am57xx_evm. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: AM43xx: board: Detect AM43xx HS EVMMadan Srinivas2016-05-27-5/+15
| | | | | | | | | | | | | | | | | | | Adds code to detect AM43xx HS EVMS - the string in the I2C EEPROM for HS EVMs differs from GP EVMs. Adds code to for evm detection, regardless of whether the evm is for GP or HS parts, and updates board init to use that. Modifies findfdt command to pick up am437x-gp-evm.dtb for the HS EVMs also, as the boards are similar except for some security specific changes around power supply and enclosure protection. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUPRobert P. J. Day2016-05-27-2/+2
| | | | | | | | | | | | | | | | Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT: config OF_BOARD_SETUP bool "Set up board-specific details in device tree before boot" depends on OF_LIBFDT ... remove superfluous tests of CONFIG_OF_LIBFDT when testing for CONFIG_OF_BOARD_SETUP. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> [trini: Typo fix: s/ifdefi/ifdef/] Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add ABB setup for all domainsNishanth Menon2016-04-25-0/+3
| | | | | | | | | | | | | ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structureNishanth Menon2016-04-25-0/+1
| | | | | | | | | | | ABB TX_DONE mask will vary depending on ABB module. For example, 3630 never had ABB on IVA domain, while OMAP5 does use ABB on MM domain, DRA7 has it on all domains with the exception of CORE, RTC. Hence, move the txdone mask definition over to structure describing voltage domain. Signed-off-by: Nishanth Menon <nm@ti.com>
* memory: Move TI_AEMIF config to KCONFIGLokesh Vutla2016-04-18-0/+5
| | | | | | | | | | Not all Keystone2 devices has AEMIF NAND controller. So adding Kconfig entry for CONFIG_TI_AEMIF and enabling it in respective defconfigs on platforms with AEMIF controller. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: am57xx: Add support for am572x idk in SPLSteve Kipisz2016-04-18-5/+295
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AM572x-IDK board (Industrial Dev Kit) is a board based on TI's AM5728x SOC which has a dual core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5728 NOTE: DT support is still pending upstream kernel acceptance but we should be able to get the base system support with this patch. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: am57xx: Update EMIF SDRAM 1 and 3 TimingsSchuyler Patton2016-04-18-2/+2
| | | | | | | | | | | | | | | | | | Update EMIF data based on recommendations from the now standard TI EMIF tool version 1.1.1 based on 256MBx16 DDR3L Kingston D2516EC4BXGGB data sheet Update T_RRD from 5 to 6 based on AM57xx TRM - Minimum number of DDR cycles from activate to ativate for a different bank, minus 1. Update T_CKESR from 4 to 3 based on AM57xx TRM - Minimum number of DDR clocks cycles for which SDRAM must remain in self refresh, minus 1. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* am57x: Move CONS_INDEX to KconfigDaniel Allred2016-04-18-0/+9
| | | | | | | | | | - Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper. - Edit the relevant am57x configs to remove the now unneeded CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: am57xx: Prevent init_sata() from being called twiceRoger Quadros2016-04-11-1/+0
| | | | | | | | | | | | | init_sata() is done as part of scsi_init() in arch/arm/cpu/armv7/omap-common/sata.c so no need to duplicate it here. This seems to fix SATA problems in the kernel when CONFIG_TI_PIPE3 is configured as loadable module. Cc: Cooper Jr., Franklin <fcooper@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
* board: ti: DRA7: Add DP83867 TI phy for rev cDan Murphy2016-04-01-0/+6
| | | | | | | | | | | Enable the TI DP83867 Giga bit phy on the dra7 rev c board. The rx and tx internal delays are need for this board so the usage of RGMII_ID is required. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: am57xx: Set ethernet MAC addresses from EEPROM to envRoger Quadros2016-03-27-0/+53
| | | | | | | | | | The MAC addresses for the PRU Ethernet ports will be available in the board EEPROM as an address range. Populate those MAC addresses (if valid) into the u-boot environment so that they can be passed on to the device tree during fdt_fixup_ethernet(). Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: DRA7: Add DRA72-rev C evm pinmuxNishanth Menon2016-03-27-36/+110
| | | | | | | | | | | | Add the pinmux data for rev C evm. This is different from previous revisions of the platform thanks to the deltas introduced both from silicon side and from SoC side. Based on J6EcoES2_EVM_Base_Config-20160309b and PCT-DRA72x-v1.3.0.7 for SR2.0 silicon. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: DRA72: revC evm: Update sdram timing configuration for SR2.0Ravi Babu2016-03-27-4/+55
| | | | | | | | | | | | | | | DDR configuration has changes from SR1.1 based Rev-A/B version of evm to the SR2.0 based Rev C of the EVM. Rev C evm now uses the higher density MT41K512M8RH-125-AAT:E (IT) which is of size 2GB. Update the DDR configuration based on data from EMIF configuration tool 1.1.1. NOTE: we use eeprom information (ram_size) to update the configuration. Tested-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: k2g: increase phy autoneg timeoutVitaly Andrianov2016-03-22-1/+1
| | | | | | | | After power cycle of a K2G EVM dhcp fails due to a auto-negotiation timeout. This commit increases the timeout to fix the issue. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* efi_loader: Add runtime servicesAlexander Graf2016-03-15-0/+30
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* omap-common: Rename set_muxconf_regs_essential to set_muxconf_regsPaul Kocialkowski2016-03-15-5/+5
| | | | | | | There is no distinction between essential and non-essential mux configuration, so it doesn't make sense to have an "essential" prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap_hsmmc: Board-specific TWL6030 MMC power initializationPaul Kocialkowski2016-03-15-0/+12
| | | | | | | | | | Boards using the TWL6030 regulator may not all use the LDOs the same way. Some might also not use MMC1 at all, so VMMC would't have to be enabled. This delegates TWL6030 MMC power initializations to board-specific functions, that may still call twl6030_power_mmc_init for the default behavior. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
generated by cgit v1.1 at 2024-11-01 18:33:59 +0000