summaryrefslogtreecommitdiff
path: root/board/synopsys
Commit message (Collapse)AuthorAgeLines
* board: axs10x switch serial port and Ethernet to driver modelAlexey Brodkin2015-11-18-12/+0
| | | | | | | | | | | | | | | | With this change Synopsys DesignWare SDP board is switched to driver model for both serial port (serial_dw) and Ethernet (Designware GMAC). This simplifies include/configs/axs101.h and allows for reuse of Linux's Device Tree description. For simplicity Linux's .dts files are not blindly copied but only very few extracts of them are really used (those that are supported in U-Boot at the moment). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* board: axs10x - cap max SDIO clock value to bus/2Alexey Brodkin2015-10-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turned out with some boards (FPGA firmwares?) and cards combos current clock settings doesn't work as expected leading to strange card freezes or corrupted data being read from the card. Especially this was seen with Transcend 2Gb cards shipped as a part of ARC SDP: ----------------->8--------------- AXS# mmcinfo Device: Synopsys Mobile storage Manufacturer ID: 74 OEM: 4a60 Name: SDC Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: No Capacity: 1.8 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes AXS# fatload mmc 0 ** Unrecognized filesystem type ** ----------------->8--------------- With this change that problem is fixed. Note "Tran Speed" above doesn't match clock value set in DW MMC. It is max value for card's speed class. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* board: axs103 - add maintainer informationAlexey Brodkin2015-07-01-0/+1
| | | | | | | | Looks like I forgot to add myself as a maintainer for AXS103 defconfig. Fixing this now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@konsulko.com>
* arc: implement slave cores kick-start for Linux kernelAlexey Brodkin2015-07-01-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | With new SMP-enabled CPUs with ARC HS38 cores and corresponding support in Linux kernel it's required to add basic SMP support in U-Boot. Currently we assume the one and only core starts execution after power-on. So most of things in U-Boot is handled in UP mode. But when U-Boot is used for loading and starting Linux kernel right before jumping to kernel's entry point U-Boot: [1] Sets all slave cores to jump to the same address [kernel's entry point] [2] Really starts all slav cores In ARC's implemetation of SMP in Linux kernel all cores are supposed to run the same start-up code. But only core with ID 0 (master core) processes further while others are looping waiting for master core to complete some initialization. That means it's safe to un-pause slave cores and let them execute kernel - they will wait for master anyway. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com>
* board: axs10x - support v3 mother-boardAlexey Brodkin2015-04-09-0/+37
| | | | | | | | | | | | | | | There're 2 versions of motherboards that could be used in ARC SDP. The only important difference for U-Boot is different NAND IC in use: [1] v2 board (we used to support up until now) sports MT29F4G08ABADAWP while [2] v3 board sports MT29F4G16ABADAWP They are almost the same except data bus width 8-bit in [1] and 16-bit in [2]. And for proper support of 16-bit data bus we have to pass NAND_BUSWIDTH_16 option to NAND driver core - which we do now knowing board type we're running on. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* board: AXS10x - update SDIO clock valueAlexey Brodkin2015-04-03-2/+2
| | | | | | | | | With the most recent board firmware correct SDIO clock is 50MHz as opposed to 25 MHz before. Also set max frequency of MMC data exchange equal to SDIO clock - because there's no way to transfer data faster than interface clock. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: add selection of endianess in KconfigAlexey Brodkin2015-02-09-11/+0
| | | | | | | | | | | This change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features. It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* board/synopsys: remove selection of CPU from the boardAlexey Brodkin2015-01-15-9/+0
| | | | | | | | Both ARCangel4 and AXS10x are FPGA-based boards so they may have different CPUs. For now we have only 1 option (ARC700) and we define this as default in arch Kconfig. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* kconfig: remove redundant "string" type in arch and board KconfigsMasahiro Yamada2014-09-13-10/+0
| | | | | | | | | | | | | | | | | | Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* axs101: Fix type mismatch warningVasili Galka2014-08-26-2/+4
| | | | | | | | Initialization of pointer from integer shall be designated by explicit type cast. Signed-off-by: Vasili Galka <vvv444@gmail.com> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
* Add board MAINTAINERS filesMasahiro Yamada2014-07-30-0/+13
| | | | | | | | | | | | | | | | | | | | We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* kconfig: add board Kconfig and defconfig filesMasahiro Yamada2014-07-30-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* axs101: flush DMA buffer descriptors before DMA transactons startsAlexey Brodkin2014-03-28-0/+8
| | | | | | | | | | | | | | | | | CPU sets DMA buffer descriptors with data required for inetrnal DMA such as: * Ownership of BD * Buffer size * Pointer to data buffer in memory Then we need to make sure DMA engine of NAND controller gets proper data. For this we flush buffer rescriptor. Then we're ready for DMA transaction. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com>
* arc: arcangel4: set board entry <none> to fix a build errorMasahiro Yamada2014-03-04-11/+0
| | | | | | | | There are no source files in board/synopsys/arcangel4/ directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* axs101: fix dw gmac instantiation for updated dw gmac driverAlexey Brodkin2014-02-21-1/+1
| | | | | | | | | | | | With accepted change to DW GMAC driver - 92a190aaab3536d695c51e0739f925910eb49889 (net/designware - switch driver to phylib usage) we need to update this board because "designware_initialize" now accepts only 2 parameters instead of 4. Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: add AXS101 board supportAlexey Brodkin2014-02-07-0/+278
| | | | | | | | | | | | | | | | | AXS101 is a new generation of devlopment boards from Synopsys that houses ASIC with ARC700 and lots of DesignWare peripherals: * DW APB UART * DW Mobile Storage (MMC/SD) * DW I2C * DW GMAC Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
* arc: add Arcangel4 board supportAlexey Brodkin2014-02-07-0/+11
Arcangel4 is a FPGA-based development board that is used for prototyping and verificationof of both ARC hardware (CPUs) and software running upon CPU. This board avaialble in 2 flavours: * Little-endian (arcangel4) * Big-endian (arcangel4-be) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
generated by cgit v1.1 at 2024-11-06 07:57:08 +0000