summaryrefslogtreecommitdiff
path: root/board/sunxi
Commit message (Collapse)AuthorAgeLines
...
* sunxi: Add support for USB vbus pin for USB3Hans de Goede2016-03-23-0/+6
| | | | | | | The H3 has USB0 - USB3, add support for having a USB vbus pin for USB3. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts for Orange Pi 2 SBCHans de Goede2016-03-23-0/+1
| | | | | | | | | | | | | | | The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot, 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header and a 40-pin GPIO header. The added dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts for Dserve DSRV9703C tabletHans de Goede2016-03-23-0/+1
| | | | | | | | | The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD, 1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig for yones toptech bs1078-v2 tabletPeter Korsgaard2016-03-23-0/+5
| | | | | | | | | | | | | | The yones toptech bs1078-v2 is a 10.1" tablet without any clear markings on the outside, but 'YONESTOPTECH-BS1078' written on the PCB silkscreen. It features a 16:9 1024:600 LCD, A31s SoC, 1GB RAM, 8G NAND, silead gsl3675 touchscreen and a RTL8723AS wifi chip: https://linux-sunxi.org/Yones_Toptech_BS1078_V2 Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig for Sinlinx SinA31sChen-Yu Tsai2016-03-23-0/+6
| | | | | | | | | | | | | | | | | The Sinlinx A31s SDK is a A31s based module/baseboard development kit. The core module has the SoC, PMIC, DRAM, eMMC and supporting components. There are also pads for UART0, JTAG and I2S. The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0 hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume buttons, RS232 style UART and USB OTG (though VBUS is not connected). Various headers are available for other addon modules, such as SDIO WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig for icnova-a20-swacStefan Roese2016-03-23-0/+5
| | | | | | | | | | | | | | | The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit: http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM http://linux-sunxi.org/In-Circuit_ICnova_A20 This patch adds support for this board, including ethernet, LCD and USB support. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun7i: Add defconfig for the Itead IboxMarcus Cooper2016-03-23-0/+5
| | | | | | | | | | | | | | | | | | Add defconfig for the multi board device based on the Allwinner A20 SoC. It contains the A20 Itead Core module and a base board for the external interfaces. The core module comes with 4GB NAND and 1GB DDR RAM. The base board to which the core board is connected provides 3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This header expands the features of core board by exposing the VGA pins, audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power.. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig for Cubietruck PlusChen-Yu Tsai2016-03-23-0/+5
| | | | | | | | | | | | | | | | | Cubietruck Plus is a A83T/H8 based development board. The board has standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet, WiFi, headphone out / mic in, and various GPIO headers. The board also has an EEPROM on i2c0 which holds the MAC address. DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20 is connected to the reset control of the PHY. EMAC is not actually supported yet. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig and dts for the Polaroid MID2809PXE4 tabletHans de Goede2016-03-23-0/+1
| | | | | | | | | | | The Polaroid MID2809PXE4 is a 9" tablet which is clearly marked Polaroid MID2809PXE4 on the back. It features a 9" 16:9 800x480 LCD, A23 Soc, 1GB RAM, 8GB NAND, gsl3670 touchscreen and esp8089 wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts for Difrence DIT4350 tabletHans de Goede2016-03-23-0/+1
| | | | | | | | | | | | The Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD, A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at i2c1 address 0x48, Memsic MXC622X accelerometer at i2c1 address 0x15 and rtl8188etv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts for colorfly e708 q1 tabletHans de Goede2016-03-23-0/+1
| | | | | | | | | | | | | | The colorfly e708 q1 is a 7" tablet which is clearly marked as colorfly e708 q1 on the back. It features a 9:16 800x1280 IPS LCD, A31s SoC, 1GB RAM, 8G NAND, ilitek 2139qt004 touchscreen on i2c-1 addr 0x41, stk8313 accelerometer on i2c-2 addr 0x22 and a rtl8188etv wifi chip. The added dts is identical to the dts submitted to the upstream kernel, note this commit also syncs axp22x.dtsi and sun6i-a31.dtsi with the upstream kernel as the added dts depends on these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* dm: block: Rename device number member dev to devnumSimon Glass2016-03-14-2/+2
| | | | | | | | | This is a device number, and we want to use 'dev' to mean a driver model device. Rename the member. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* sunxi: power: add support for sy8106a driverJelle van der Waa2016-02-23-1/+9
| | | | | | | | | | | | | | | | SY8106A is a PMIC which is used on the Allwinner H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is implemented to set the default V-CPU voltage to 1200 mV. This driver is required to ensure the SY8106A V-CPU voltage is set to 1200 mV after a software reset. On cold boot the default SY8106A output voltage is selected to be 1200 mV by a pair of resistors on the Orange Pi PC and Plus. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: power: axp818: Enable support for ALDOsChen-Yu Tsai2016-01-26-5/+3
| | | | | | | | | | | | Previously, AXP818 ALDO support was partially added to Kconfig, but never enabled in the board file, nor properly set or configured in Kconfig. The boards continue to work because the AXP818 is designed to pair with the A83T/H8, and the default voltages match the reference design's requirements. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* power: axp: merge separate DLDO functions into 1Chen-Yu Tsai2016-01-26-4/+4
| | | | | | | | | | | Instead of one function for each DLDO regulator, make 1 function that takes an extra "index". Since the control bits for the DLDO regulators are contiguous, this makes the function very simple. This removes a lot of duplicate code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add suport for A83T based Banana-pi M3 BoardVishnu Patekar2016-01-26-0/+5
| | | | | | | | | | | | Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Groundwork to support new dram type for A83TVishnu Patekar2016-01-26-0/+6
| | | | | | | | | | | | | | Different A83T boards have different DRAM types. Banapi M3 has LPDDR3, Allwinner Homlet v1.2 has DDR3. This adds groundwork to support for new DRAM type for A83T. Introduce CONFIG_DRAM_TYPE, It'll be 3 for DDR3 and 7 for LPDDR3, must be set in respective board defconfig. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Enable booting non-secure and virtualization for H3Chen-Yu Tsai2016-01-26-0/+3
| | | | | | | | | Now that we support PSCI and various security switches, we can let U-boot boot Linux into non-secure and HYP mode. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-21-0/+12
| | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* sun5i: Add defconfig and dts file for the Empire Electronix D709 tabletHans de Goede2015-12-21-0/+1
| | | | | | | | | | | | | | | The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet, featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack. Empire Electronix is written on the back of the tablet, the D709 model info can be found in the about tablet menu in android. The PCB has no markings to speak of. This dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add suport for A83T HomletV2 Board by Allwinnervishnupatekar2015-12-10-0/+5
| | | | | | | | | | | | Add dts and defconfig for h8homletv2 board. H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: power: enabled support for axp818vishnupatekar2015-12-10-5/+8
| | | | | | | | | Enabled support for AXP818 in SPL and u-boot. DCDC1, DCDC2, DCDC3 and DCSC5 are enabled. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add Machine Support for A83T SOCvishnupatekar2015-12-10-1/+8
| | | | | | | | | | | Allwinner A83T is octa-core cortex-a7 SOC. This enables support for A83T. SMP is not yet supported. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add support for the Lamobo R1 boardJelle de Jong2015-11-22-0/+5
| | | | | | | | | | | | | | | The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add support for Orangepi Plus and Orangepi PC boardsHans de Goede2015-11-22-0/+2
| | | | | | Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add H3 DRAM initialization supportJens Kuske2015-11-22-0/+1
| | | | | | | | Based on existing A23/A33 code and the original H3 boot0. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add basic H3 supportJens Kuske2015-11-22-1/+6
| | | | | | | | Add initial sun8i H3 support, only uart + mmc are supported for now. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add CHIP supportMaxime Ripard2015-10-20-0/+1
| | | | | | | | | | | | | The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. The DT is identical to the DT submitted to the upstream kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Use Kconfig CONFIG_MMCMaxime Ripard2015-10-20-0/+4
| | | | | | | | | Not all sunxi boards have an MMC embedded. Switching to the Kconfig option will allow to enable or disable the support in each boards' defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig for the Sinovoip BPI-M2 boardHans de Goede2015-10-20-0/+1
| | | | | | | | | | | | | | | The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features 1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver, stereo headphone jack and hdmi video output. The dts changes are identical to the dts files submitted upstream. A few notes on the use if dldo and aldo regulators. DLDO1 is used for Vdd for the ethernet phy, ALDO2 is used for AVdd for the ethernet phy. ALDO1 is used to power the sdio wifi module. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Fix sorting of boards in MAINTAINERSHans de Goede2015-10-20-1/+1
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: power: Unify axp pmic function namesHans de Goede2015-10-20-38/+32
| | | | | | | | | Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: power: Make all voltages configurable through KconfigHans de Goede2015-10-20-24/+24
| | | | | | | | | | | | On boards with axp221/223 pmic-s we already allow configuring most voltages. Make the Kconfig options for these also apply to boards with axp152 / axp209 pmic-s and extend them to configure all voltages. The Kconfig defaults are chosen so that this commit does not introduce any functional changes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Remove board defconfig-s for specific Q8 tablet PCB-sHans de Goede2015-10-20-22/+0
| | | | | | | | | | | | | | | | | | | | We now have generic q8_a?3_defconfig files for Q8 formfactor tablets with an A13 / A23 / A33 SoC, there is no need for these PCB variant specific defconfig-s and they only serve to confuse the user. Note that in case of the forfun_q88db_defconfig and TZX-Q8-713B7_defconfig for A13 based Q8 tablets there is not even a dts file for these in the upstream kernel, which is all the more reason to remove them. The generic q8_a?3_defconfig files have been tested on an Et_q8_v1_6, Ippo_q8h_v1_2_a33_1024x600, Ippo_q8h_v1_2 and TZX-Q8-713B7 tablet, and the forfun_q88db_defconfig is identical to q8_a13_tablet_defconfig. This leaves only the Ippo_q8h_v5 untested with the new generic defconfigs but there is no reason to assume that it will not work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Enable CONFIG_SPL_STACK_RHans de Goede2015-10-20-0/+4
| | | | | | | | | | | | Select CONFIG_SPL_STACK_R for sunxi boards, this gives us much more room on the stack once we've the DRAM running. Besides being a good change to have on itself, this also paves the way for switching to using malloc_simple in the SPL which cuts of close to 4KiB of the SPL size. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCDHans de Goede2015-10-03-0/+1
| | | | | | | | | | | | | | | | | | | | | The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCDHans de Goede2015-09-29-0/+2
| | | | | | | | | | | | | | | | | | | | | The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts[i] files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: retrieve FEL-provided values to environment variablesBernhard Nortmann2015-09-29-0/+35
| | | | | | | | | | | | | | | | | | | This patch extends the misc_init_r() function on sunxi boards to test for the presence of a suitable "sunxi" SPL header. If found, and the loader ("fel" utility) provided a non-zero value for the boot.scr address, then the corresponding environment variable fel_scriptaddr gets set. misc_init_r() also sets (or clears) the "fel_booted" variable depending on the active boot device, using the same logic as spl_boot_device(). The goal is to provide sufficient information (within the U-Boot environment) to make intelligent decisions on how to continue the boot process, allowing specific customizations for the "FEL boot" case. Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Rename A10s-Wobo-i5_defconfig to Wobo_i5_defconfigHans de Goede2015-09-29-2/+1
| | | | | | | | | | | | We only prefix the board defconfig name with the SoC if the SoC is part of the official board-name, such as with Olimex OLinuxIno boards, for the Wobo i5 this is not the case so remove the A10s prefix from the defconfig filename. Also fix the double listing of A10s-OLinuXino-M_defconfig in MAINTAINERS which the original Wobo i5 addition commit introduced. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add A10s-Wobo-i5 defconfig and dtsJelle van der Waa2015-09-10-0/+2
| | | | | | | | | | | | | | The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add q8_a13_tablet defconfig and dtsHans de Goede2015-09-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | This commits adds a generic support for q8 formfactor a13 based tablets. These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side. For now this will suffice. The dts files are identical to the dts files submitted to the upstream kernel for these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add dts and defconfig for iNet-1 based tabletsHans de Goede2015-09-10-0/+1
| | | | | | | | | | | | | | | | | The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add defconfig and dts for inet9f-rev03 based tabletsHans de Goede2015-09-10-0/+1
| | | | | | | | | | | | | | | | The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add defconfig and dts for the pov protab2-ips9 tabletHans de Goede2015-09-10-0/+1
| | | | | | | | | | | The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Fix MAINTAINERS board sortingHans de Goede2015-08-31-1/+1
| | | | | | | | The boards are sorted by SoC, move the Mele_A1000G_quad entry to the list of sun6i boards where it belongs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add support for the Olimex A20 EVBMarcus Cooper2015-08-31-0/+5
| | | | | | Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add inet98v_rev2 defconfig and dts fileHans de Goede2015-08-31-0/+1
| | | | | | | | | | | The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add inet97fv2_defconfigHans de Goede2015-08-31-0/+1
| | | | | | | | | | | The inet97fv2 is a board found in the first generation of cheap allwinner A10 based 7" tablets. Note that this patch does not add a dts file as we already have one from our dts syncs with the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXIHans de Goede2015-08-31-1/+1
| | | | | | | | | | | | | | | We eventually want to add full nand support, since it makes no sense to build SPL with nand support and u-boot without, or the other way around, a single option will suffice. Renaming the Kconfig option now makes things easier when we add full nand support in the future. The "obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o" is moved to an "ifdef CONFIG_SPL_BUILD" block in the Makefile. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi_nand_spl: Add support for sun4i and sun5i SoCsHans de Goede2015-08-31-3/+9
| | | | | | | | | | | | Other then having a few less chip-select lines the nand controller on sun4i, sun5i and sun7i is identical. Note this patch also muxes GPC7 to the NAND on sun7i where as before it was not muxed this way. GPC7 is a standard NAND pin, so it should always be muxed to the NAND when in use. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-11-08 00:19:35 +0000